• 한국컴퓨터정보학회논문지
• /
• 제3권1호
• /
• pp.1-12
• /
• 1998

2D 메쉬(two-dimensional mesh) 시스템에서 효율적인 서브메쉬 할당이 되기 위해서는 서브메쉬의 할당 시간과 시스템 진입 태스크의 응답 시간이 작아야 한다. Quick Allocation(QA)은 서브메쉬의 할당 시간을 줄이지만 외부 단편화를 발생시킬 가능성이 높다. 이로 인해 태스크의 응답 시간이 커지게 된다. 본 논문에서는 서브메쉬 할당 시간에는 거의 영향을 미치지 않으면서 외부 단편화를 줄일 수 있도록 QA 알고리즘을 개선하였다. 수정된 알고리즘은 QA에 비해 태스크들의 응답 시간을 다소 감소시켰음이 실험을 통하여 확인되었다.

• 한국정밀공학회지
• /
• 제12권7호
• /
• pp.138-147
• /
• 1995

The conventional PWM method, which was used in controlling the on-off valve, such as high-speed solenoid valve, was modulating the width of the pulse applied to the valve, by selecting arbitrary sampling time and modulating the duty-ratio in proportion to the error. However, in this method, a selection of long sampling time was inevitable and it was unable to get a high accuracy and a quick response. This study is for designing an appropriate controller for high-speed solenoid valve by proposing an improved duty-ratio modulation method using the Saw-toothed Carrier Wave which enables a short sampling time selection, high accuracy of control, and a quick response. Test which was carried out in the laboratory shows that transient and steady state response could be improved by PID controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.267-269
• /
• 1996

Servo systems became indispensable to applications such as industrial robots and numerically controlled machinery. Especially, induction motor drives are widely used as ac-servo system owing to the fact that it is maintenance-free. At the present time, Quick torque control methods such as vector control have been employed that enables an induction motor to attain as quick torque response as a dc motor. However, these methods can not be realized without knowing several motor parameters accurately, because the methods need them to calculate flux or voltage command. Most of all, secondary resistance has to be identified accurately, because it's value varies greatly for operation of induction motors. In this paper, a new identification method of secondary resistance based on quick torque control system of induction motors is proposed. The proposed method is derived theoretically from motor circuit equation and can be realized very simply by detecting primary current and voltage command of the motor. Through the numerical simulation considered using PWM inverter, the validity of the proposed method was successfully confirmed.

• 드라이브 ㆍ 컨트롤
• /
• 제16권3호
• /
• pp.59-66
• /
• 2019

Hydraulic systems are essential for most of the construction equipments due to their various advantages, such as very powerful, quick response speed, precision control and remote control. Moreover, they are necessary to apply the electro hydraulic systems for precise and remote controls. Operating the small electronic joystick of the remote controller for the control of a multipurpose work machine with remote control technology increases the possibility of a sudden operation compared to the use of a conventional hydraulic joystick. When a joystick is suddenly operated, the peak pressure is generated in the system due to the quick response of the system. Then a vibration is generated due to the peak pressure, which causes instability to the operation of the construction equipment. Therefore, in this study, we confirmed the level of reduction of peak pressure occurring in the electro hydraulic system by using AMESim, when the output signal of the step shape generated by the sudden operation of the electronic joystick was changed by using the convolution operation.

• 전력전자학회논문지
• /
• 제18권4호
• /
• pp.376-386
• /
• 2013

This paper proposes an improved Maximum Power Point Tracking method and design methods of unmanned solar vehicle system by parts of hardware, unmanned driving control and power conversion. The hardware design is offered on the weight reduction and structural reliability by using structural analysis software. The technique of curve fitting is applied to unmanned control system due to minimizing the vehicle's behavior. Furthermore, lateral controller applying actuator dynamics is robust enough to prevent performance degradation by measurement noise regarding position and heading angle. The power conversion system contains battery charger system and tapped-inductor boost converter. In the battery charger system, variable step-size MPPT is conducted for quick response of maximum power point tracking. The validity of the proposed algorithm are verified by simulations and experiments.

• 복식
• /
• 제44권
• /
• pp.168-179
• /
• 1999

In order to settle down structural causes of the process of distribution and apparel production in domestic fashion industry, and to raise competitive power with changing market environment, we need to bulid up Quick Response(QR) system based on information technology such as EDI(Electronic Data Interchange), KAN(Korea Article Number), and POS(Point of Sales), POS is the most valuable information tool to promote QR system paractically. The purpose of this study was to investigate motivation of POS adoption, problems in operating the system, and satisfaction on POS effects. Data were collected by sending questionnaire to the managers in apparel firms which were using POS. Statistical devices were t-test, frequency with SAS program. The results fo the study were as follows: 1. The degree of satisfaction to POS effects was rather good. Especially, rapid evaluations on new products gave the greatest satisfaction to the users. 2. Satisfaction degree of POS effects according to introduces time and organization characteristic(number of employees) have no significant difference, but the firms which have higher annual sales volume showed higher satisfaction degree. Merchandise department showed higher satisfaction on POS effects. 3. The motivation of POS adoption was an effective logistics control with consumer information as a marketing strategy. The problems in operating the system were lack of investment, and professionals. They almost didn't have KAN code, instead, have their own code system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.339-341
• /
• 2006

The regenerating energy of the servo system is mostly consumed as heats through the regenerating resistors. For the response of the servo system to be more improved, the paper proposes the boost inverter using the regenerating energy, The proposed boost inverter has the additional capacitor installed on the DC-link circuit for charging the regenerating energy from the load. To get the better response of the servo system, the charged regenerating energy can be shortly re-applied to the output side as the finite impulse voltage, which can be controlled from information of reference voltages and feedbacked currents. It is verified by PSIM simulator that the response characteristics of the servo system using the proposed boost inventer is improved, comparing to that using the general inverter.

• Smart Structures and Systems
• /
• 제3권1호
• /
• pp.115-131
• /
• 2007

The electromechanical integrated toroidal drive is a new drive system. For the control of the drive, the torque fluctuation and the steady-state errors should be removed and the fast response to the input change should be achieved. In this paper, the torque fluctuation of the drive system is analyzed and expressed as Fourier series forms. The transfer function of the torque control for the drive system is derived from its electromechanical coupled dynamic equations. A 2-DOF control method is used to control the drive system. Using definite parameter relationship of the 2-DOF control system, the steady errors of the torque control for the drive system is removed. Influences of the drive parameters on the control system are investigated. Using proper drive parameters, the response time of the control system is reduced and the quick torque response of the drive system is realized. Using a compensated input voltage, the torque fluctuation of the drive system is removed as well. The compensated input voltage can be obtained from the torque fluctuation equation and the transfer function. These research results are useful for designing control system of the new drive.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 춘계학술발표대회
• /
• pp.958-960
• /
• 2013

본 논문에서는 스마트 폰과 QR코드를 활용하여 기존의 출입 통제 시스템과 보안시스템의 역할을 수행하며 문제점을 해결할 수 있는 시스템을 제안하고자 한다. 출입 통제 시스템은 종이카드에 기록이 되기 때문에 전산화 하지 못하고 출근카드가 소진이 되면 추가로 구매해야하는 불편함이 있으며, RFID를 활용한 카드 출입기는 카드를 분실할 경우 복제의 위험성과 보안에 문제점이 발생하게 된다. 보안 시스템에서는 감시카메라를 전역 설치할 경우 비용이 커지며, 기록을 보존해야하기 때문에 대용량 저장 장치가 필요하게 된다. 이 시스템을 활용할 경우 스마트 폰의 사용자 정보와 QR코드의 정보를 통해 출입 통제 기능을 수행할 수 있으며, 카메라의 기능을 통해 감시카메라 역할을 대신하여 비용을 절감할 수 있고 출입 통제기록과 근태 관리 등을 전산화를 시킬 수가 있어 근무자를 관리하는데 용이해진다.

• 지능정보연구
• /
• 제16권3호
• /
• pp.163-179
• /
• 2010

최근 패션산업에서는 고객의 니즈가 다양해지고 공급 리드타임이 크게 단축됨에 따라 최신 유행을 즉각 반영한 디자인, 빠른 상품 회전율로 승부하는 패스트 패션이 각광받고 있다. 또한, 기업간 경쟁도 심화되면서 얼마나 신속하게 효율적으로 고객의 니즈를 만족시킬 것인가가 패션산업의 중요한 성공요인으로 강조되고 있다. 따라서, 다품종 소량 신속생산이 강조되는 패스트 패션 산업에서는 트랜드 변화에 신속 대응을 지원하는 지능형 신속대응시스템(Intelligent Quick Response System : IQRS) 구축 및 지원을 절실히 요구하고 있다. 본 논문은 패스트 패션 산업 IQRS 구축에서 요구되는 신속대응 프로세스 수립, 지능적 판단을 지원하는 신속대응 기준 및 실행, 신속대응 물량 산정 및 시기 의사결정 모델을 제시하였다. 또한, 신속대응 의사결정의 합리성을 검증할 수 있는 KPI(Key Performance Indicator)를 설계하여 모델의 신뢰도를 향상시켰다. 제시된 각 모델은 A사의 ERP 구현사례를 통해 실용성을 검증하였다.