• Korean Journal of Veterinary Service
• /
• v.39 no.3
• /
• pp.137-140
• /
• 2016

The correct and quick diagnosis can be minimized damage from honeybee diseases. This study was carried out to detect infectious pathogens in honeybee in Jeonbuk province. 183 samples were collected from 8 area of Jeonbuk beekeeping farms in 2015 and 10 of infectious pathogens were examined through PCR and RT-PCR. Among 183 samples, positive rates of each disease were as follows; BQCV 43.7%, SBV 24.6%, DWV 16.4%, SB 15.8%, CB 10.4%, Nosemosis 7.1%, AFB 6.6%, EFB 1.1%, CBPV 1.1%, ABPV 0.0%. Among 28 beekeeping farms, 19 farms (67.9%) were infected with a complex of two or more diseases. The highest frequency of complex infections was BQCV.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.103-108
• /
• 1999

The paper describes a implementation of space vector pulse-width modulation voltage source inverter and interfacing of DSP using field programmable gate array(FPGA) for a induction motor vector control system. The implemented chip is included logic circuits for SVPWM, dead time compensation and speed detection using Quick Logic, QLl6X24B. The maximum operating frequency and delay time can be set to 110MHz and 6 nsec. The designed Application Specific Integrated Circuit(ASIC) for SVPWM can be incorporated with a digital signal processing to provide a simple and effective solution for high performance induction motor drives with a voltage source inverter. Simulation and implementation results are shown to verify the usefulness of ASIC in a motor drive system and power electronics applications.

• Journal of the Korean Society of Tobacco Science
• /
• v.29 no.2
• /
• pp.132-139
• /
• 2007

This study was performed to apply the more rapid and accurate sample preparation, and the high selectivity and sensitivity of the analyte detection by gas chromatography-triple quadrupole mass spectrometry (GC-MS/MS). QuEChERS (quick, easy, cheap, effective, rugged and safe) method was validated for 49 agrochemicals in the CORESTA Agrochemical Advisory Committee guide and amenable to GC-MS/MS determination. In QuEChERS method, the effects of sorbents (PSA, $C_{18}$ and GCB) and matrix of the analytes in tobacco types (flue-cured, burley and oriental) were investigated. MS/MS acquisition provided high specificity and selectivity for agrochemicals and low limit of quantification. QuEChERS by using PSA alone and the matrix-matched standards gave good recoveries and RSD values in three types of tobaccos. QuEChERS method was no needed to be complex clean-up procedure and would be used as the fast and easy method for agrochemical residue analysis in tobacco.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.133-139
• /
• 2001

The economical detection of dual-tone multi-frequency(DTMF) signals is an important factor when developing cost-effective telecommunication equipment. Each channel has independently a DTMF receiver, and it informs the detected signal to processors. In order to detect the DTMF signals, this paper analyze the power spectra of the DTMF receiver by using the QFT algorithm. As experimental result, by analyzing 2$\^$M/ real data in terms of ITU-T specification, it show that the QFT algorithm improve the performance of the DTMF receiver and can save memory waste and can the real-time processing.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.105-108
• /
• 2000

The economical detection of dual-tone multifrequency(DTMF) signals is an important factor when developing cost-effective telecommunication equipment. Each channel has independently a DTMF receiver, and I t informs the detected signal to processors. This paper analyze the power spectra and evaluate the performance of DTMF receiver by using tile quick Fourier transform(QFT) algorithm. As experimental results, it show the improved performance to the DTMF receivers and reduce memory waste and process the real-time.

• Journal of information and communication convergence engineering
• /
• v.11 no.3
• /
• pp.216-222
• /
• 2013

It is known that blood circulation in human body causes the skin tone to change concurrently with heartbeats. A number of apps have been developed to measure the heartbeat using smartphone camera; however, no any further analysis is performed. In this paper we propose an algorithm that detects heartbeats from the phone's camera and further extracts the heart rate variability (HRV). We compare the HRV extracted from the camera with the HRV extracted from the electrocardiogram. We estimated a number of commonly used HRV characteristics and compared them. Our results show that smartphone camera leads to slightly overestimated characteristics although the difference in extracted HRV signals is negligible. As a consequence we suggest that a smartphone camera can be employed in a quick heart diagnosis and diagnosis of autonomic nervous system.

• Journal of Information Processing Systems
• /
• v.8 no.4
• /
• pp.713-720
• /
• 2012

Unlike FEM (Finite Element Method), which provides an accurate deformation of soft objects, FFD (Free Form Deformation) based methods have been widely used for a quick and responsive representation of deformable objects in real-time applications such as computer games, animations, or simulations. The FFD-AABB (Free Form Deformation Axis Aligned Bounding Box) algorithm was also suggested to address the collision handling problems between deformable objects at an interactive rate. This paper proposes an enhanced FFD-AABB algorithm to improve the frame rate of simulation by adding the bounding sphere based collision test between 3D deformable objects. We provide a comparative analysis with previous methods and the result of proposed method shows about an 85% performance improvement.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.885-887
• /
• 2003

The purpose of this investigation is to generate true orthophotos from high resolution satellite images. The major works of this research include 4 parts: (1) determination of orientation parameters, (2) generating traditional orthophotos using terrain model, (3) relief correction for buildings, and (4) process for hidden areas. To determine the position of satellites, we correct the onboard orientation parameters to fine tune the orbit. In the generation of traditional orthophotos, we employ orientation parameters and digital terrain model(DTM) to rectify tilt displacements and relief displacements for terrain. We, then, compute relief displacements for buildings with digital building model (DBM). To avoid double mapping, we detect hidden areas. Due to the satellite’s small field of view, an efficient method for the detection of hidden areas and building rectification will be proposed in this paper. Test areas cover the city of Kaohsiung in southern Taiwan. Test images are from the QuickBird satellite.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.51-53
• /
• 2004

In this paper, we are going to propose the new algorithms to detect, classify, discriminate the transient and the reflected signal from noise and thus discriminate the fault section and locale the fault accurately on underground power cable system. Actually, at this system, it's very difficult to discriminate the transient because of the reflected signal including many noises. Therefore, how to solve the noise interference is a big problem. In this paper, authors present a solution based on multiple scales correlation of the transient using stationary wavelet transform. It's simple, quick and straightforward. For applying all algorithms, we just use the signal captured in single end.

• Journal of the Korean Chemical Society
• /
• v.43 no.2
• /
• pp.182-192
• /
• 1999

The new GD/ICP-AES quick change over system has been developed and characterized. Within less than 15 minutes, ICP-AES could be switched to GD-AES and vise a versa. As a result, both solid and liquid samples could be analyzed in a very short period of time by the ICP/GD-AES quick change over system developed in our laboratory. The influences of the experimental variables, such as flow rate of coolant gas, flow rate of auxiliary gas, flow rate of sample carrier gas, sampling depth, orifice size of sampling cone, and rf (radio frequency) power on emission intensity have been presented. The detection limits of Cd(I) 228.8 nm, Mn (II) 257.61 nm, and Fe(II) 259.95 nm were found to be 3.86, 1.49, and 5.79 ppb, respectively. And linealities of the calibration curves were measured to be unity.