• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.84-91
• /
• 2011

Recently, WBAN(Wireless Body Area Network) which has progressed standardization based on IEEE 802.15.6 standardization is a network for the purpose of the short-range wireless communications within around 3 meters from the inner or outer human body. Effective QoS control technique and data efficient management in limited bandwidth such as audio and video are important elements in terms of users and loads in short-range wireless networks. In this paper, for high-speed WBAN IEEE 802.15.6 standard, the dynamic allocation to give an efficient bandwidth management and weighted fair queueing algorithm have been proposed through the adjustment of the super-frame about limited data and Quality of Service (QoS) based on the queuing algorithm. Weighted Fair Queueing(WFQ) Algorithm represents the robust performance about elements to qualitative aspects as well as maintaining fairness and maximization of system performance. The performance results show that the dynamic allocation expanded transmission bandwidth five times and the weighted fair queueing increased maximum 24.3 % throughput and also resolved delay bound problem.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.675-682
• /
• 2000

In this paper, we propose a new scheduling algorithm called the Adaptive Weighted Round Robin with Delay Tolerance (AWRR/DT). The proposed scheme is based on the per-class queueing mechanism in which a number of connections of similar characteristics are multiplexed into one class-queue. Traffic classes of the proposed method are classified into a single non-real-time traffic class and other real-time traffic classes. The proposed scheme determines the weights of classes according to the input traffic and delay characteristics of each class at the beginning of every cycle. Furthermore, this scheme incorporates a cell discarding method to reduce the QoS degradation that may be incurred by congestion of networks. We have evaluated the proposed scheme through discrete-event simulation. Simulation results indicate that the proposed scheme can reduce the average delay of non-real-time class while maintaining the QoS of real-timeclasses. The proposed algorithm can be effectively applied to high-speed networks such as ATM networks.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.20-33
• /
• 2002

Usage of ATM AAL2 packets becomes dominant to increase transmission efficiency of voice traffic in the backbone network. In case of voice service that uses AAL2 mechanism, if resources of network are enough, connection of new call is accepted. However, due to packets generated by the new call, transmission delay of packets from old calls can increase sharply. To control this behavior, in this paper we present an AAL2 buffer management scheme that allocates a virtual buffer to each call and after calculating its propagation delay variation(PDV), decides to drop packets coming from each call according to the PDV value. We show that this packet dropping algorithm can effectively prevent abrupt QoS degradation of old calls. To do this, we analyze AAL2 packet composition process to find a critical factor in the process that influences the end-to-end delay behavior and model the process by K-policy M/D/1 queueing system and MIN(K, Tc)-policy M/D/1 queueing system. From the mathematical model, we derive the probability generating function of AAL2 packets in the buffer and mean waiting time of packets in the AAL2 buffer. Analytical results show that the AAL2 packet dropping algorithm can provide stable AAL2 packetization delay and ATM cell generation time even if the number of voice sources increases dramatically. Finally we compare the analytical result to simulation data obtained by using the COMNET Ⅲ package.

• ETRI Journal
• /
• v.24 no.4
• /
• pp.311-322
• /
• 2002

Presently, optical burst switching (OBS) technology is under study as a promising solution for the backbone of the optical Internet in the near future because OBS eliminates the optical buffer problem at the switching node with the help of no optical/electro/optical conversion and guarantees class of service without any buffering. To implement the OBS network, there are a lot of challenging issues to be solved. The edge router, burst offset time management, and burst assembly mechanism are critical issues. In addition, the core router needs data burst and control header packet scheduling, a protection and restoration mechanism, and a contention resolution scheme. In this paper, we focus on the burst assembly mechanism. We present a novel data burst generation algorithm that uses hysteresis characteristics in the queueing model for the ingress edge node in optical burst switching networks. Simulation with Poisson and self-similar traffic models shows that this algorithm adaptively changes the data burst size according to the offered load and offers high average data burst utilization with a lower timer operation. It also reduces the possibility of a continuous blocking problem in the bandwidth reservation request, limits the maximum queueing delay, and minimizes the required burst size by lifting up data burst utilization for bursty input IP traffic.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.2
• /
• pp.1-9
• /
• 1998

ATM was adopted as the switching and multiplexing technique for BISDN which aims at transmitting traffics with various characteristics in a unified network. To construct these ATM networks, the most important aspect is the design of the switching system with high performance and different service capabilities. In this paepr, we analyze the performance of an input and output queueing switch with preemptive priority which is considered to be most suitable for ATM networks. For the analysis of an input queue, we model each input queue as two separate virtual input queues for each priority class and we approximage them asindependent Geom/Geom/1 queues. And we model a virtual HOL queue which consists of HOL cells of all virtual input queues which have the same output address to obtain the mean service time at each virtual input queue. For the analysis of an output quque, we obtain approximately the arrival process into the output queue from the state of the virtual HOL queue. We use a Markov chain method to analyze these two models and obtain the maximum throughput of the switch and the mean queueing delay of cells. and analysis results are compared with simulation to verify that out model yields accurate results.

• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.1
• /
• pp.23-37
• /
• 1997

In this paper, performance analysis of video traffic shaper for Motion Picture Experts Group (MPEG) video traffic in on ATM network are investigated. Traffic shaping for MPEG video traffic is proposed as a traffic control function in ATM networks. The proposed shaper smoothes video traffics by controling the output rate of the buffer, which is placed in an MPEG source, according to I,B,P frame sequences of MPEG. In performance analysis of an video traffic shaper, a periodic botch arrival model is suggested to describe cell streams in a frame of MPEG video traffic. The queueing model which has periodic independent botch arrival and periodic deterministic service time is used to obtain the cell loss ratio, the mean cell delay, and the measure of smoothing effect. Simulation results are used to validate this queueing model. The cell loss performance of ATM multiplexer is measured by simulation study with real MPEG-1 data. From the viewpoint of traffic load, the cell loss ratio is observed to be considerably high, which is considered to result from the burstiness of MPEG video traffic. As a result, it is shown that the shaping decreases cell loss ratio of multiplexer. The results of this paper can be employed to establish a basic guideline in the implementation of a traffic control scheme and the design of ATM multiplexer for MPEG video traffic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.4
• /
• pp.227-236
• /
• 1986

In this paper, an integrated voice/data packet network with window flow control is modeled by a colsed multichain queueing system, and its performance is analyzed by the mean value analysis method. Particularly, for the analysis of a packet network having various kinds of messages with different priority classes, we introduce an approach based on the mean value analysis and the concept of effective capacity. By the mathematical analysis and computer simulation, we obtain the following network statistics in the steady state: Mean buffer occupancy at each node, utilization of link throughput of a virtual channel, and mean delay time of each message. Our iterative analysis method can predict the link data status in most cases within about 10 percent of accurady, and the statistics of voice messages and external data within 5 percent as compared to simulation results.

• Journal of applied mathematics & informatics
• /
• v.17 no.1_2_3
• /
• pp.737-746
• /
• 2005

Average memory occupancy and congestion in computer system or communication system may be reduced further if new jobs are admitted only when the number of jobs queued at CPU is below a certain threshold, run queue cutoff (RQ). In our previous paper we showed that response time of a job is invariant with respect to RQ if jobs do not communicate each other. In this paper, we prove that the invariance property by considering the evolution of the queue lengths as point processes. We also present an approximate method for the delay due to context switching under time slicing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.1
• /
• pp.16-24
• /
• 1986

The queueing delay and the response time of model of the buffer insertion LAN have been derived and its performance has been analyzed in terms of the throughput rate-response time characteristic. The results show that the response time can be improved by increasing the medium data rate, and that it can be reduced by 0.7 msec by transmitting the acknowledgement signal at the network interface unit(NIU) rather than at the hose, when the channel utilization is approximately 0.8. Also, implementation of the buffer insertion protocol has been studied.

• IE interfaces
• /
• v.13 no.2
• /
• pp.178-187
• /
• 2000

In this paper, we investigate the system performance when the voice traffic is constructed as the ATM Adaptation Layer type 2(AAL-2) and then it is transmitted to the Base Station Controller(BSC) from the Base Station Transceiver Subsystem(BTS) through El link in International Mobile Telecommunication-2000 (IMT-2000) network. For this purpose, we first briefly describe the architecture of the BTS and the BSC, and then model it as a queueing network. By simulation study, we present the required processing time at traffic control blocks and the timeout time which should be set for multiplexing the user packets in the LIU(Line Interface Unit). Further, we evaluate the performance of physical links and the timeout probability that user packets can not be multiplexed within the established timeout time, and the multiplexing gain. Finally, we present the number of voice users who can be simultaneously admitted on one El link and 99.9% value of the transmission delay from the Radio Channel Element(RCE) to the Selector & Transcoder Subsystem(STS).