• 대한치과기공학회지
• /
• 제22권1호
• /
• pp.69-78
• /
• 2000

The microstructure and corrosion behavior of commercially dental casting gold alloys were investigated to clarify the effect of burn-out temperature and cooling rate. In the case of water quenching after casting, only the αphase, which is typical dendritic microstructure of golda alloy, was detected. However, the precipitates along the grain boundary were detected only at the slow cooling rate and they increased inversely proportional to the burn-out temperature. This might be due to the time difference which solute atom could diffuse. EPMA and SEM results also demonstrated that the precipitate should be lamellar structure consisted of Ag rich phase(${\alpha}_1$) and Cu rich phase (${\alpha}_2$). In terms of corrosion, the galvanic coupling was formed due to the difference of composition between precipitates and matrix at the slow cooling rate. In the case of water quenching, the critical current density($i_p$) which indicate the degree of corrosion was lowest at $650^{\circ}C$ and below the burnout temperature, $i_p$ increased with it because of the effect of grain boundary segregation. But above the temperature, $i_p$ increased with it. This may be due to the strain field effect by residual thermal stress.

• 한국주조공학회지
• /
• 제33권5호
• /
• pp.193-203
• /
• 2013

The Ni-base superalloy CM247LC was directionally solidified (DS) using the Bridgman-type furnace to understand the effect of the chill plate on the microstructural evolution, such as dendrite arm spacing, microporosity, and MC-type carbide. The DS process was also modeled by the PROCAST to predict the solidification rate, thermal gradient, and resultant cooling rate in the entire length of the DS specimen. Due to the quenching effects of chill plate, four distinct areas were found to form in the specimen, in which the solidification rate was changed, during DS at a given withdrawal rate of 0.083 mm/s. Among the microstructural features investigated, the dendrite arm spacings and average size of the MC-type carbide near the chill plate were found to be influenced by the quenching effect of the chill plate. However, no significant influence was found on the size and volume fraction of microporosity, and the volume fraction of the MC-type carbide. The relationship between the microstructural features and the solidification variables was also analyzed and discussed on the basis of a combination of experimental and modeling results.

• Design & Manufacturing
• /
• 제11권2호
• /
• pp.37-41
• /
• 2017

With light vehicle weight gradually becoming ever more importance due to tightened exhaust gas regulations, hot-stamping processing using boron alloyed steel is being applied more and more by major automobile OEMs since process assures both moldability and a high strength of 1.5 GPa. Although laser trimming is generally applied to the post-processing of the hot-stamped process with high strength, there have been many studies of in-die hot trimming using shear dies during the quenching of material in order to shorten processing times. As such, this study investigated the effects of the Shear rate and Shear mechanism on shear processes during the quenching process of hot-stamping material. In case of pad variable, padding force is very weak compared with shear force, so it does not affect the shear surface. In case of shear rate, the higher the shear at high temperatures and the higher the friction effect. As a result the rollover and the fracture distribution decreased, and the burnish distribution increased. Therefore, it is considered that the shear quality is guaranteed when high shear rate is applied in high temperature shear process.

• 한국재료학회지
• /
• 제8권11호
• /
• pp.1031-1037
• /
• 1998

Zircaloy-4와 Zr-2.5Nb 합금의 부식에 미치는 냉각속도와 소둔온도의영향을 조사하기 위해서 여러 가지 방법으로 열처리된 시편에 대해서 autoclave 부식시험을 실시하였다. 냉각속도의 영향을 조사하기 위해서 시편을 $1050^{\circ}C$에서 30분 가열 후 염빙수냉, 수냉, 유냉, 공냉, 노냉의 방법에 의해 열처리하였으며, 소둔온도의 영향을 조사하기 위해서 $\alpha$온도, $\alpha$+$\beta$온도, $\beta$온도구역에서 열처리하였다. $500^{\circ}C$부식시험 결과, Zircaloy-4합금에서는 nodule형 부식이 발생되는 반면에 Zr-2.5Nb 합금에서는 nodule형 부식이 발생되지 않았다. Zirfcaloy-4 합금에서는 nodule형 부식이 발생되는 반면에 Zr-2.5Nb 합금에서는 nodule형 부식이 발생되지 않았다. Zircaloy-4합금은 냉각속도가 빠를수록 내식성이 증가하는 반면에 Zr-2.5Nb합금은 냉각속도가 빠를수록 내식성이 감소하는 경향을 보였다. 또한 소둔온도가 증가할수록 Zr-2.5Nb 합금의 내식성은 감소하는 결과를 보였다. Zircaloy-4의 내식성은 Fe, Cr 원소의 기지내 분포와 석출물의 분포에 의해 지배를 받으며 Zr-2.5Nb 합금의 내식성은 기지조직내의 Nb 농도와 $\beta_{-Nb}$상에 의해 지배를 받는 것으로 사료된다.

• 한국농림기상학회지
• /
• 제23권2호
• /
• pp.100-107
• /
• 2021

영농형 태양광은 동일 토지면적에서 태양광 패널에 의한 발전과 작물 경작을 융합한 시스템이다. 광 에너지가 부족한 영농형 태양광 하부에서 작물의 수확량이 감소하는 것은 필연적이나, 이를 관장하는 패널 하부에서 생육한 작물의 광합성 반응에 대해서는 국내외적으로 거의 알려진 바가 없다. 본 연구는 고정형 영농형 태양광 시설 하부에서 재배된 작물 잎에 흡수된 광에너지가 광합성 반응 중심에 전달되고 열로 방출되는 효율을 엽록소 형광 관측을 통해 조사하였다. 패널 하부와 노지의 콩과 벼는 ETR에서 큰 차이가 없는 것으로 보아 광인산화 효율보다는 잎이 흡수한 광 에너지에 따라 CO₂ 고정량이 결정되는 것으로 보인다. 또한, 패널 하부의 콩과 벼는 노지보다 NPQ가 더 높은 것으로 보아 활성화된 광보호기작이 광인산화로의 에너지 분배에 부정적 역할을 할 수 있을 것으로 보인다. 향후 영농형 태양광에서의 작물 생산량과 광합성의 관계를 이해하기 위해 보다 다양한 기후 및 재배조건에서의 광합성 반응을 조사할 필요가 있겠다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.143-145
• /
• 2015

A mesoscale channel was designed to observe the flame stabilization at low strain rate conditions (< $10s^{-1}$). At this condition, the behavior of partially premixed flame was explored by changing a channel size and the oxygen ratio in the oxidant. In this work, experiment is conducted for propane case and it was compared with methane case of previous one. Conclusively, it can be observed that the strain rate of flame extinction and starting point of oscillation were varied with oxygen ratio. Moreover we can understand the effects of enhanced oxygen ratio of oxidant and flame behavior at low strain rate conditions.

• 한국약용작물학회지
• /
• 제20권5호
• /
• pp.320-330
• /
• 2012

This study was conducted to investigate the changes of chlorophyll contents, chlorophyll fluorescence, photosynthetic parameters, and leaf growth of Synurus deltoides under different shading treatments. S. deltoides was grown under non-treated (full sunlight) and three different shading conditions (Shaded 88~93%, 65~75%, and 45%~55%). Light compensation point ($L_{comp}$), dark respiration ($D_{resp}$), maximum photosynthesis rate ($Pn_{max}$), photo respiration rate ($P_{resp}$), carboxylation efficiency ($\Phi_{carb}$), and photochemical efficiency were decreased with increasing shading level; However, $CO_2$ compensation point ($CO_{2\;comp}$), total chlorophyll content, and specific leaf area (SLA) were shown the opposite trend. S. deltoides under 88~93% treatment showed the lowest photosynthetic activity such as maximum photosynthetic rate ($Pn_{max}$), photochemical efficiency, and $CO_2$ compensation point ($CO_{2\;comp}$). Therefore, photosynthetic activity will be sharply decreased with a long period of 8~12% of full sunlight. With the shading level decreased, carotenoid content and non-photochemical fluorescence quenching (NPQ) increased to prevent excessive light damage. This result suggested that growth and physiology of S. deltoides adapted to high light intensity through regulating its internal mechanism.

• 열처리공학회지
• /
• 제30권6호
• /
• pp.258-263
• /
• 2017

The effect of cooling rate on the damping capacity of pure Mg was studied. Two Mg samples with different cooling rates were prepared by heat treatment at 873 K for 24 h, followed by water quenching and by furnace cooling to room temperature, respectively. The average grain sizes of the Mg samples were almost identical regardless of the cooling rate, but more twins were observed in the sample with faster cooling rate. The calculated vacancy fraction was higher in the fast cooling sample than the slow cooling one. It is noted that the fast cooling sample exhibited lower damping capacity both in the strain-amplitude independent and strain-amplitude dependent regions. Higher values of vacancy concentration and number density of twins in the fast cooling sample are considered to be responsible for the deteriorated damping capacity in the strain-amplitude independent and strain-amplitude dependent regions, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제19권10호
• /
• pp.1063-1068
• /
• 1998

The nature of F electronic excitation energy transfer to OH- vibrational levels in KCl crystals is the exchange interaction, although the transfer process exhibits three temporally distinguishable components depending on the distance between excited F center and OH-. The critical distance as well as rate of the major energy transfer process in randomly distributed samples increases rapidly as OH- librational motions become active with temperature rise. The excited state character introduced into the OH- ground electronic state by perturbation is essential for the exchange interaction. The perturbation is brought about by the expanded electron cloud of excited F center for OH- associated to F center, whereas by librations and lattice vibrations perpendicular to the bond axis for isolated OH- . F excitation quenching efficiency by OH- is dependent on the variation of the critical distance rather than the rate as the rate is much faster than the normal F bleach recovery rate.

• Journal of Microbiology and Biotechnology
• /
• 제26권9호
• /
• pp.1593-1604
• /
• 2016

Recently, bacterial quorum quenching (QQ) has been proven to have potential as an innovative approach for biofouling control in membrane bioreactors (MBRs) for advanced wastewater treatment. Although information regarding the microbial community is crucial for the development of QQ strategies, little information exists on the microbial ecology in QQ-MBRs. In this study, the microbial communities of biofilm were investigated in relation to the effect of QQ on anoxic/oxic MBRs. Two laboratory-scale MBRs were operated with and without QQ-beads (QQ-bacteria entrapped in beads). The transmembrane pressure increase in the QQ-MBRs was delayed by approximately 100-110% compared with conventional- and vacant-MBRs (beads without QQ-bacteria) at 45 kPa. In terms of the microbial community, QQ gradually favored the development of a diverse and even community. QQ had an effect on both the bacterial composition and change rate of the bacterial composition. Proteobacteria and Bacteroidetes were the most dominant phyla in the biofilm, and the average relative composition of Proteobacteria was low in the QQ-MBR. Thiothrix sp. was the dominant bacterium in the biofilm. The relative composition of Thiothrix sp. was low in the QQ-MBR. These findings provide useful information that can inform the development of a new QQ strategy.