• 전기학회논문지
• /
• 제57권12호
• /
• pp.2199-2201
• /
• 2008

Sulfur hexafluoride($SF_6$) is a gaseous dielectric used in high voltage electrical equipment such as an insultor or arc quenching medium in the transmission and distribution of electricity. however, $SF_6$ is one of the greenhouse gases(GHG) with a global warming potential that is 23,900 times greater than that of carbon dioxide($CO_2$). for this reason, $SF_6$ emissions in electric equipment shall be controlled to reduce GHG and improve cost-effective use of $SF_6$ for economical benefits. Until recently there has not been any investigation on $SF_6$ emission characteristics and inventory in Korea. To understand emission characteristics during the use-phase, the scope of this study was limited to the following closed pressure system equipment from 10 substations in Korea. This study highlights (1) the investigation of sampling/analysis methodology for $SF_6$ emissions in high voltage equipment, (2) the estimation of $SF_6$ emissions in the use-phase, and (3) the comparison between the emission ratio and the mass-balance applied to inventory study. According to this study, the majority of emissions were related to electric equipment nameplates and the rest of the emissions were related to the handling of $SF_6$ during operations. from this result, emission ratios estimated from this study were similar; GIS was 14% and GCB was 13%, as maintenance process conditions were the same as manual process conditions for both equipment.

• 청정기술
• /
• 제2권2호
• /
• pp.100-125
• /
• 1996

After recycle of spent materials has been optimised, there remains a proportion of waste which must be dealt with in the most environmentally friendly manner available. For materials such as municipal waste, clinical waste, toxic waste and special wastes such as tyres, incineration is often the most appropriate technology. The study of incineration must take a process system approach covering the following aspects: ${\bullet}$ Collection and blending of waste, ${\bullet}$ The two stage combustion process, ${\bullet}$ Quenching, scrubbing and polishing of the flue gases, ${\bullet}$ Dispersion of the flue gases and disposal of any solid or liquid effluent. The design of furnaces for the burning of a bed of material is being hampered by lack of an accurate mathematical model of the process and some semi-empirical correlations have to be used at present. The prediction of the incinerator gas phase flow is in a more advanced stage of development using computational fluid dynamics (CFD) analysis, although further validation data is still required. Unfortunately, it is not possible to scale down many aspects of waste incineration and tests on full scale incinerators are essencial. Thanks to a close relationship between SUWIC and Sheffield Heat&Power Ltd., an extended research programme has been carried out ar the Bernard Road Incinerator plant in Sheffield. This plant consists of two Municipal(35 MW) and two Clinical (5MW) Waste Incinerators which provide district heating for a large part of city. The heat is distributed as hot water to commercial, domestic ( >5000 dwelling) and industrial buildings through 30km of 14" pipes plus a smaller pipe distribution system. To improve the economics, a 6 MW generator is now being added to the system.

• 자원리싸이클링
• /
• 제4권4호
• /
• pp.37-58
• /
• 1995

본 고에서는 소형 타이어 원형 그대로를 시멘트 kiln inlet 부분에 투입하였고, 그 부분의 가스온도와 시멘트 원료 온도는 각각 $1050^{\circ}C$, $800~850^{\circ}C$ 정도이다. 폐타이어를 4단 부유예열실에서 예열된 고온의 원료와 함께 kiln 입구부분에 투입하였다. 투입량은 폐타이어 열이용 실험 대상 kiln인 열소비량의 3, 5, 7%로 정하여 실험하였다. 폐타이어 열이용 전에 폐타이어의 성상을 분석하였으며, 열이용을 실험하는 동안에 투입수준별로 시멘트 소성공정에 미치는 영향, 즉 예열실 온도, 압력, 배가스량, 배가스성분, 코팅형성, 전력 사용량, 연료감소량, clinker 생산량 변화 등을 분석하였고, 품질에 미치는 영향에서는 시멘트 색도, 광물조성, 응결시간, 압축강도 등의 변화를 분석하였고, 환경오염 평가에서는 $SO_2$, NOx의 증감을 측정 분석하였다. 폐타이어 투입수준 5%일 때 비교적 시멘트 공정이 안정한 상태를 보였으며, 이때의 열량회수율도 50% 정도였고, 시멘트 품질은 사용전과 등등 수준이었다. $SO_2$, NOx는 증가하는 경향이었으나 규제치에는 훨씬 못미치는 수치였다.

• 천문학회지
• /
• 제54권1호
• /
• pp.17-35
• /
• 2021

We study galaxies undergoing ram pressure stripping in the Virgo cluster to examine whether we can identify any discernible trend in their star formation activity. We first use 48 galaxies undergoing different stages of stripping based on H i morphology, H i deficiency, and relative extent to the stellar disk, from the VIVA survey. We then employ a new scheme for galaxy classification which combines H i mass fractions and locations in projected phase space, resulting in a new sample of 365 galaxies. We utilize a variety of star formation tracers, which include g - r, WISE [3.4]-[12] colors, and starburstiness that are defined by stellar mass and star formation rates to compare the star formation activity of galaxies at different stripping stages. We find no clear evidence for enhancement in the integrated star formation activity of galaxies undergoing early to active stripping. We are instead able to capture the overall quenching of star formation activity with increasing degree of ram pressure stripping, in agreement with previous studies. Our results suggest that if there is any ram pressure stripping induced enhancement, it is at best locally modest, and galaxies undergoing enhancement make up a small fraction of the total sample. Our results also indicate that it is possible to trace galaxies at different stages of stripping with the combination of H i gas content and location in projected phase space, which can be extended to other galaxy clusters that lack high-resolution H i imaging.

• 열처리공학회지
• /
• 제36권3호
• /
• pp.121-127
• /
• 2023

When high carbon steel is heated in an appropriate austenizing temperature range and subjected to austempering, the size and shape of lamellar structure can be controlled. The high carbon steel sheet having the pearlite structure has excellent elastic characteristics because it has strong restoring force when properly rolled, and is applied in a process known as patenting-process using lead bath. In the case of isothermal treatment using lead-medium, it is possible to quickly reach a uniform temperature due to high heat transfer characteristics, but it is difficult to replace it with process technology that requires treatment to remove harmfulness lead. In this study, we intend to develop fluidization technology using garnet powder to replace the lead medium. After heating the high-carbon steel, the cooling rate was changed by compressed air to the vicinity of the nose of the continuous cooling curve, and then maintained for 90 s and then exposed to room temperature. The microstructure of the treated specimens were analyzed and compared with the existing products treated with lead bath. The higher the flow rate of compressed air, the faster the cooling rate to the pearlite transformation temperature, so lamellar spacing decreases and the hardness tends to increase.

• 보존과학회지
• /
• 제30권4호
• /
• pp.335-343
• /
• 2014

현재까지 분석된 백제지역 출토 철기 유물의 금속미세조직과 비금속개재물 분석 자료들을 한강, 금강, 영산강 유역권으로 분류하여 조업 온도를 추정하고 제강 및 열처리 기술을 지역적 시대별 특성을 조사하였다. 세 지역 모두 시대에 관계없이 고체저온환원으로 괴련철이나 해면철이 주 제철 방법으로 판단된다. 비금속개재물의 산화물 삼원상태도로 재해석한 결과 로내 온도는 $1,100{\sim}1,300^{\circ}C$ 정도에서 조업하였던 것으로 추정된다. 철광석은 자철광석이 주원료이며, $TiO_2$가 높은 것들은 사철을 사용하였던 것으로 보인다. $CaO/SiO_2$의 비율이 0.4 이상인 유물들은 석회질의 융제를 인위적으로 넣었던 것으로 판단된다. 제강은 저탄소강을 단야로에서 숯으로 가열할 때 나오는 CO, $CO_2$ gas로 침탄시키는 고체 침탄강임을 알 수 있었다. 또한 의도적으로 필요 부분의 강도를 높이는 침탄작업과 담금질을 하였던 것으로 보아 3세기에는 백제지역의 철기제작자들은 열처리 기술을 인지하고 있었다.

• 천문학논총
• /
• 제32권1호
• /
• pp.201-203
• /
• 2017

There exists strong evidence supporting the co-evolution of central supermassive black holes and their host galaxies; however it is still under debate how such a relation comes about and whether it is relevant for all or only a subset of galaxies. An important mechanism connecting AGN to their host galaxies is AGN feedback, potentially heating up or even expelling gas from galaxies. AGN feedback may hence be responsible for the eventual quenching of star formation and halting of galaxy growth. A rich multi-wavelength dataset ranging from the X-ray regime (Chandra), to far-IR (Herschel), and radio (WSRT) is available for the North Ecliptic Pole field, most notably surveyed by the AKARI infrared space telescope, covering a total area on the sky of 5.4 sq. degrees. We investigate the star formation properties and possible signatures of radio feedback mechanisms in the host galaxies of 237 radio sources below redshift z = 2 and at a radio 1.4 GHz flux density limit of 0.1 mJy. Using broadband SED modelling, the nuclear and host galaxy components of these sources are studied simultaneously as a function of their radio luminosity. Here we present results concerning the AGN content of the radio sources in this field, while also offering evidence showcasing a link between AGN activity and host galaxy star formation. In particular, we show results supporting a maintenance type of feedback from powerful radio-jets.

• Journal of Ginseng Research
• /
• 제22권2호
• /
• pp.102-113
• /
• 1998

This experiment used chlorophyll fluorescence techniques to assess the effect of irradiant during leaf development on photoinhibition of photosynthesis in Panax ginseng. Seedlings of p. ginseng were grown in the 91asshouse at four shade levels. The maximum mid-day irradiant in each treatment between emergence (January 4) and completion of the experiment (February 25) was 1220, 485, 235, 125 $\mu$mol/$\textrm{m}^2$/s. To assess the rapidity of photosynthetic readaptation to changes in light levels, fluorescence parameters (Fo, F, Fm, Fm', AF/Fm;, Fv/Fm) were measured for three days before and after transfer of plants (on February 21) from each light treatment into each of the other light treatments. Before transfer, dark adapted values of Fv/Fm in the 1220 (0.699) and 485 (0.739) treatments were different from each other and lower than values in the 235 (0.764) and 125 (0.768) treatments, indicating mild photoinhibition. Patterns of change in F during the day also differed between treatments, with low light treatments tracking irradiant levels, but F in the high light treatment (1220) declined in the morning, presumably due to fluorescence quenching. Although plants grown at high irradiant had relatively low photosynthetic efficiency, relative electron transport rate was greater than in lower irradiant treatments. After transfer, plants adopted the daily pattern of change in F of the treatment to which they were moved with little change in absolute levels of F, except in plants transferred from the highest (1220) to the lowest light level (125), where F increased over the course of the three days following transfer. After plants were transferred, Fm' converged on values similar to those in plants raised in the treatments to which they were moved. Values of Fv/Fm in plants moved from low to high light declined dramatically, but there was no decline in plants from 485 moved to 1220. Values of Pv/Fm in plants that were moved from high light to lower light increased to values above those recorded in plants raised in the lower light treatments. Reductions in quantum efficiency caused by photoinhibition at high irradiant may be more than compensated for by higher electron transport rates, although evidence suggests that under high irradiant this tends to be balanced by reduced leaf area and earlier senescence. Chlorophyll fluorescence techniques appear capable of indicating effects of irradiant induced stress in ginseng, yielding results comparable to those obtained with gas exchange techniques but in less time and with greater replication.

• 해양환경안전학회지
• /
• 제27권6호
• /
• pp.898-904
• /
• 2021

본 연구에서는 강화되는 황산화물 및 입자상물질의 배출규제를 만족시키기 위한 후처리장치로 습식전기집진기에 대한 실험적 연구를 수행하였다. 실험을 위해 선박용 중유(HFO, 황함유량 약 2.1%)를 연료로 사용하는 선박용 4행정 디젤엔진(STX-MAN B&W)을 활용하였으며, 연돌에 설치된 습식전기집진기 입/출구에서 측정을 실시하였다. 미세먼지 측정을 위해서는 광학식 계측기(OPA-102) 및 중량농도측정방식(Method 5 Isokinetic Train)을 이용하였으며, 황산화물 계측을 위해서는 FT-IR(DX-4000)을 사용하였다. 엔진부하는 50%, 75%, 100%로 변화시키면서 실험을 실시하였다. 실험 결과로, 엔진부하가 50%에서 100%로 변화함에 따라 미세먼지 저감 효율은 모든 부하 조건에서 94~98% 정도의 높은 저감 효율을 나타내었다. 추가적으로 습식전기집진기 퀜칭존에서 배기가스의 온도를 낮추는 과정 중 세정액에 의한 이산화황(SO₂) 저감을 확인할 수 있었으며, 저감율은 엔진부하에 따라 55%~81%로 확인되었다.

• 분석과학
• /
• 제22권2호
• /
• pp.186-190
• /
• 2009

산 매질 조건에서 다양한 할로겐산화물을 이용하여 황 원소를 포함한 유기물(thiourea, methionine)과 무기물(sulfate, thiophosphate)의 산화에 관한 연구를 수행하였다. 산화반응의 최적조건은 3 M 질산용액 매질에서 bromate (${BrO_3}^-$)를 산화제로 사용했을 때 얻어졌다. 유기 황 화합물인 thiourea에서는 100%의 산화 수율을 확인하였으며, methionine을 사용한 결과는 87%이었다. 또한 무기 황 화합물인 thiophosphate와 sulfate의 산화는 각각 80%와 100%의 산화 수율을 얻었으며, 5%의 상대표준표차(RSD)가 있음을 확인하였다. Thiourea의 산화는 1.6배의 bromate가 필요하였으며, methionine과 thiophosphate의 경우에는 20배 이상이 필요함을 관찰하였다. 황산염 이온은 황산 바륨($BaSO_4$)으로 침전을 확보하였으며, 이때 얻어진 방사성 황산 바륨($Ba^{35}SO_4$)은 기체비례계수기(gas proportional counter, GPC)을 이용하여 정량적으로 측정하였다. $^{35}S$ 계측을 위한 소광보정곡선은 무게 차이를 이용하여 작성되었다.