• 비파괴검사학회지
• /
• 제23권6호
• /
• pp.577-582
• /
• 2003

This paper describes a new technique for thickness measurement of a very thin layer less than one-quarter of the wavelength of ultrasonic wave used in the ultrasonic pulse-echo measurements. The technique determines the thickness of a thin layer in a tapered medium from constructive interference of multiple reflection waves. The interference characteristics are derived and investigated in theoretical and experimental approaches. Modified total reflection wave g(t) defined as difference between total and first reflection waves increases in amplitude as the interfacial layer thickness decreases down to zero. A layer thickness less than one-tenth of the ultrasonic wavelength is measured using the maximum amplitude of g(t) with a good accuracy and sensitivity. The method also requires no inversion process to extract the thickness information from the waveforms of reflected waves, so that it makes possible to have the on-line thickness measurement of a thin layer such as a lubricating oil film in thrust bearings and journal bearings during manufacturing process.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권2호
• /
• pp.85-91
• /
• 2002

A novel multi-section power divider configuration is Proposed to obtain wide-band frequency performance up to microwave frequency region. Design procedures for the proposed microwave broadband power divider are composed of a Planar multi-section three-Ports hybrid and a waveguide transformer design procedures. The multi∼section power divider is based on design theory of the optimum quarter- wave transformer Furthermore, in order to obtain the broadband isolation performance between the two adjacent output ports, the odd mode equivalent circuit should be matched by using the lossy element such as resistor. The derived design formula for calculating these odd mode∼matching elements is based on the singly terminated filter design theory. The waveguide transformer section is designed to suppress the propagation of the higher order modes such as waveguide modes due to employing the metallic electric wall. Simulation and experiment show excellent performance of multi section power divider.

• 한국항해항만학회지
• /
• 제34권7호
• /
• pp.543-552
• /
• 2010

Modified compact combline bandpass filters are proposed based on the miniaturized quarter-wave transmission line which is composed of the parallel coupled line and lumped capacitors. The electrical length of the parallel coupled line in a resonator, which determines the size of combline bandpass filters, is just $5^{\circ}$ or $7^{\circ}$, resulting in a compact circuit area. The designed combline bandpass filter also has a wide upper stopband by suppressing the spurious passbands, not moving. Measured results of two fabricated filters centered at 400MHz show good agreement with the theoretical predications.

• 유통과학연구
• /
• 제12권6호
• /
• pp.49-57
• /
• 2014

Purpose - The world now recognizes environmental disruption as a serious issue when regarding growth-oriented strategies; therefore, environmental preservation issues become pertinent. Consequently, green distribution is continuously emphasized. However, studying the prediction and association of distribution and the environment is insufficient. Most existing studies about green distribution are about its necessity, detailed operation methods, and political suggestions; it is necessary to study the distribution service industry and environmental service industry together, for green distribution. Research design, data, and methodology - ARIMA (auto-regressive moving average model) was used to predict the environmental service and distribution service industries, and the Granger Causality Test based on VAR (vector auto regressive) was used to analyze the causal relationship. This study used 48 quarters of time-series data, from the 4th quarter in 2001 to the 3rd quarter in 2013, about each business type's production index, and used an unchangeable index. The production index about the business type is classified into the current index and the unchangeable index. The unchangeable index divides the current index into deflators to remove fluctuation. Therefore, it is easy to analyze the actual production index. This study used the unchangeable index. Results - The production index of the distribution service industry and the production index of the environmental service industry consider the autocorrelation coefficient and partial autocorrelation coefficient; therefore, ARIMA(0,0,2)(0,1,1)4 and ARIMA(3,1,0)(0,1,1)4 were established as final prediction models, resulting in the gradual improvement in every production index of both types of business. Regarding the distribution service industry's production index, it is predicted that the 4th quarter in 2014 is 114.35, and the 4th quarter in 2015 is 123.48. Moreover, regarding the environmental service industry's production index, it is predicted that the 4th quarter in 2014 is 110.95, and the 4th quarter in 2015 is 111.67. In a causal relationship analysis, the environmental service industry impacts the distribution service industry, but the distribution service industry does not impact the environmental service industry. Conclusions - This study predicted the distribution service industry and environmental service industry with the ARIMA model, and examined the causal relationship between them through the Granger causality test based on the VAR Model. Prediction reveals the seasonality and gradual increase in the two industries. Moreover, the environmental service industry impacts the distribution service industry, but the distribution service industry does not impact the environmental service industry. This study contributed academically by offering base line data needed in the establishment of a future style of management and policy directions for the two industries through the prediction of the distribution service industry and the environmental service industry, and tested a causal relationship between them, which is insufficient in existing studies. The limitations of this study are that deeper considerations of advanced studies are deficient, and the effect of causality between the two types of industries on the actual industry was not established.

• 한국전자파학회논문지
• /
• 제22권6호
• /
• pp.598-604
• /
• 2011

본 논문은 연결된 결합 선로를 이용하여 브랜치 선로 결합기를 소형화하는 방법을 제시하였다. 이 방법은 기존 마이크로스트립 브랜치 선로 결합기에 사용되는 ${\lambda}/4$ 선로를 같은 특성을 갖는 연결된 결합 선로로 대신한 방법이다. 연결된 결합 선로는 우-기 모드 해석 방법을 기반으로 Z 파라미터와 T 등가 회로로 분석하였다. 이 결과를 이용하여 연결된 결합 선로를 갖는 브랜치 선로 결합기를 중심 주파수 2.4 GHz에서 FR4 기판으로 설계하고 제작하였다. 실험 결과는 이론값과 잘 일치했다. 그리고 실험 결과, 기존 단일 마이크로스트립 선로로 구현된 결합기보다 37 % 크기가 줄어들었음을 확인할 수 있었다. 이 방법은 앞으로 이동 통신 빔 형성 안테나의 급전선인 Butler Matrix의 크기를 줄이는 방법으로 사용 가능하리라 사료된다.

• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.76-81
• /
• 2015

This paper presents a design of a transmission line negative group delay (NGD) circuit with multiple pole characteristics. By inserting an additional transmission line into a conventional NGD circuit, the proposed circuit provides further design parameters to obtain wideband group delay (GD) and to help reduce signal attenuation. As a result, the number of gain compensating amplifiers can be reduced, which can contribute to stable operation when integrated into RF systems. The multiple pole characteristics can provide wider NGD bandwidth and can be obtained by connecting resonators with slightly different center frequencies separated by quarter-wavelength transmission lines. For experimental validation, an NGD circuit with two poles GD characteristic is designed, simulated, and measured.

• 대한전자공학회논문지TC
• /
• 제47권6호
• /
• pp.22-25
• /
• 2010

이 논문은 브랜치라인 커플러에서 고조파 신호를 제거할 수 있는 변형된 설계 방법을 제안한다. 기존의 1/4 파장 길의의 전송선로의 중앙에 개방형 스터브를 추가한 후에, 설계 주파수에서는 커플러의 기능을 제공하고 고조파 주파수에서는 전송을 제한하는 특성을 갖는 커플러의 해를 구하는 것이 가능하다. 이의 검증 예로서 1.0GHz에서 커플러를 제작하였으며 2.0GHz와 3.0GHz에서 -37.5dB 및 -42.7dB의 억압비를 나타내었다.

• 대한전자공학회논문지SD
• /
• 제38권5호
• /
• pp.375-381
• /
• 2001

디바이스의 크기가 0.25㎛이하로 축소됨에 따라 DRAM(Dynamic Random Access Memory) 제조업체들은 칩 크기를 줄이고 지역적인 배선으로 사용하기 위해서 기존의 텅스텐-폴리사이드 비트-선에서 텅스텐 비트-선으로 대체하고 있다. 본 논문에서는 다양한 RTP 온도와 추가 이온주입을 사용하여 낮은 저항을 갖는 텅스텐 비트-선 제조 공정에 대해 다루었다. 그 결과 텅스텐 비트선 저항에 중요한 메계변수는 RTP Anneal 온도와 BF₂ 이온 주입 도펀트임을 알 수 있었다. 이러한 텅스텐 비트-선 공정은 고밀도 칩 구현에 중요한 기술이 된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.300-302
• /
• 1996

In this paper a new series-parallel compensated uninterruptible power supply is proposed. Its series compensator shapes input current to sinusoid. The power handled by series compensator is only a quarter of ratings. And parallel compensator delivers sinusoidal voltage to nonlinear load. The parallel compensator is backedup with battery. This system has capabilities of power line conditioner and backup power with reduced size.

• Journal of electromagnetic engineering and science
• /
• 제12권4호
• /
• pp.254-259
• /
• 2012

This paper presents a closely spaced two-element folded-dipole-driven quasi-Yagi array with low mutual coupling between adjacent elements. The antenna utilizes a T-junction power divider as the feeding network, with an input impedance of $50{\Omega}$. A microstrip-stub is added to the ground plane in the middle of the two elements to improve the mutual coupling characteristics. The folded dipole driver is connected to a $50{\Omega}$ microstrip line via a broadband microstrip-to-coplanar stripline transition with a quarter radial stub. A mutual coupling of less than -22 dB is measured between two folded-dipole-driven quasi-Yagi antennas with a center-to-center spacing of 30 mm ($0.55{\lambda}_0$ at 5.5 GHz). The proposed quasi-Yagi array yields a measured bandwidth of 4.75~6.43 GHz for the -10 dB reflection coefficient and a gain of 6.14~7.12 dBi within the bandwidth range.