• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.722-732
• /
• 2016

A new optical one-time password (OTP) authentication method using digital holography is proposed, which enhances security strength in the authentication system. A challenge-response optical OTP algorithm based on two-factor authentication is presented using two-step phase-shifting digital holography, and two-way authentication is also performed using challenge-response handshake in both directions. Identification (ID), password (PW), and OTP are encrypted with a shared key by applying phase-shifting digital holography, and these encrypted pieces of information are verified by each party by means of the shared key. The encrypted digital holograms are obtained by Fourier-transform holography and are recorded on a CCD with 256 quantized gray-level intensities. Because the intensity pattern of such an encrypted digital hologram is distributed randomly, it guards against a replay attack and results in higher security level. The proposed method has advantages, in that it does not require a time-synchronized OTP, and can be applied to various authentication applications. Computer experiments show that the proposed method is feasible for high-security OTP authentication.

• Journal of Broadcast Engineering
• /
• v.20 no.6
• /
• pp.862-870
• /
• 2015

The RDO (Rate Distortion Optimization) process of HEVC results in good coding efficiency, but relatively requires much encoding time. In order to reduce the encoding time of RDO process, this paper proposes a method of fast intra prediction mode decision using DCT coefficients distributions and the existence of DCT coefficients. The proposed fast Intra coding sets the number of intra prediction mode candidates to three(3) from the RMD (Rough Mode Decision) process in HM16.0 reference SW and reduces the number of candidates one more time by investigating DCT coefficients distribution. After that, if there exists a quantized DCT block having all zero coefficient values for a specific candidate before the RDO process, the candidate is chosen without the RDO process. The proposed method reduces the encoder complexity on average 46%, while the coding efficiency is 2.1% decreased compared with the HEVC encoder.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.4
• /
• pp.145-154
• /
• 2008

In this paper, we propose the pet robot control system using hand gesture recognition in image sequences acquired from a camera affixed to the pet robot. The proposed system consists of 4 steps; hand detection, feature extraction, gesture recognition and robot control. The hand region is first detected from the input images using the skin color model in HSI color space and connected component analysis. Next, the hand shape and motion features from the image sequences are extracted. Then we consider the hand shape for classification of meaning gestures. Thereafter the hand gesture is recognized by using HMMs (hidden markov models) which have the input as the quantized symbol sequence by the hand motion. Finally the pet robot is controlled by a order corresponding to the recognized hand gesture. We defined four commands of sit down, stand up, lie flat and shake hands for control of pet robot. And we show that user is able to control of pet robot through proposed system in the experiment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.9
• /
• pp.1158-1165
• /
• 2021

This paper proposes a CNN accelerator which is optimized Pooling layer operation incorporated in Multiplication And Accumulation(MAC) to reduce the memory size. For optimizing memory and data path circuit, the quantized 8bit integer weights are used instead of 32bit floating-point weights for pre-training of MNIST data set. To reduce chip area, the proposed CNN model is reduced by a convolutional layer, a 4*4 Max Pooling, and two fully connected layers. And all the operations use specific MAC with approximation adders and multipliers. 94% of internal memory size reduction is achieved by simultaneously performing the convolution and the pooling operation in the proposed architecture. The proposed accelerator chip is designed by using TSMC65nmGP CMOS process. That has about half size of our previous paper, 0.8*0.9 = 0.72mm². The presented CNN accelerator chip achieves 94% accuracy and 77us inference time per an MNIST image.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.11
• /
• pp.2543-2551
• /
• 1997

This paper proposes a compression technique of image data, a variable length PN code and channel models which are required in CDMA communication system. It also analyzes their performances. Original images is compressed by 2-D DCT and its coefficients are quantized by optimal quantizer at compression rate 0.84bit/pel. Channel model 1 and 2 which are composed of 5 and 4 channels respectively are employed to be used in CDMA. Such a situation forces us to empoly variable length PN code, such as Chebyshev map for spread spectrum system. When average PN code length of model 1 and 2 is 44.4 and 26.7 chips respectively, the received image through these models under Gaussian noise with variance 1.75 is visually of the same quality as the transmitting image. Thus, the model 2 appears to be better in channel efficiency, comparing with channel model 1 and channel model which uses fixed length PN code.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.170-176
• /
• 2009

It has been known that multiuser MIMO systems have better performance than single-user MIMO systems. However, multiuser MIMO systems should eliminate inter-user interferences which are generated by allocating data to multiple users simultaneously There is zero-forcing beamforming (ZFBF) as scheme used widely among algorithms to eliminate inter-user interferences. But, it needs many feedback bits since BS knows quite exact channel state information to use this scheme in real systems. Random beamforming (RBF) was proposed to cope with a defect of ZFBF[1]. RBF is a multiuser scheme to send data to users who have optimal performance with predetermined codebook, each receiver feeds back a index of codeword which has optimal performance within the codebook and its CQI information. [1] assumes that the BS knows perfect CQI information of each receiver but CQI information should be quantized in the real systems. Therefore, in this paper, efficient CQI quantization scheme for RBF system is proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.1
• /
• pp.111-115
• /
• 2015

In injection molding process using hot runners, color change is a critical issue. This work proposes a method of assessing the color change characteristics of thermoplastics polymers. A method that utilizes a capillary die to measure degree of color change has been devised and implemented. The extrudate from the capillary die has been imaged and quantized to a gray scale value. Based on the gray scale value, the degree of color change has been determined. Under given temperatures and extrusion velocity, its trend along with the number of extrusion has been obtained and analyzed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.440-440
• /
• 2012

Nanomaterials have emerged as new building blocks to construct light energy harvesting assemblies. Size dependent properties provide the basis for developing new and effective systems with semiconductor nanoparticles, quantized charging effects in metal nanoparticle or their combinations in 2 and 3 dimensions for expanding the possibility of developing new strategies for photovoltaic system. As top-down approach, we developed a simple and effective method for the large scale formation of self-assembled Cu(In,Ga)$Se_2$ (CIGS) nanostructures by ion beam irradiation. The compositional changes and morphological evolution were observed as a function of the irradiation time. As the ion irradiation time increased, the nano-dots were transformed into a nano-ridge structure due to the difference in the sputtering yields and diffusion rates of each element and the competition between sputtering and diffusion processes during irradiation. As bottom-up approach, we developed the growth of CIGS nanowires using thermal-chemical vapor deposition (CVD) method. Vapor-phase synthesis is probably the most extensively explored approach to the formation of 1D nanostructures such as whiskers, nanorods, and nanowires. However, unlike binary or ternary chalcogenides, the synthesis of quaternary CIGS nanostructures is challenging because of the difficulty in controlling the stoichiometry and phase structure. We introduced a method for synthesis of the single crystalline CIGS nanowires in the form of chalcopyrite using thermal-CVD without catalyst. It was confirmed that the CIGS nanowires are epitaxially grown on a sapphire substrate, having a length ranged from 3 to 100 micrometers and a diameter from 30 to 500 nm.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.7
• /
• pp.402-409
• /
• 2005

In this paper. we propose a coding method using a matching pursuit algorithm in a strongly periodic highband signal. Also. we propose an efficient quantizer for the estimated parameters : spectral magnitude and phase. Based on the error concealment principle and sinusoidal model. the MP algorithm requires the high-precision pitch period estimation. To estimate more accurate pitch period. the refined pitch obtained from lowband speech is used. which increases the efficiency of bit allocation. The spectral magnitude parameters are quantized by the method which is combined with MDCT (Modified Discrete Cosine Transform) and multi-stage structure. The spectral phase quantizer uses the $2{\pi}$ modular characteristic of phases and the weighted function by spectral magnitudes. To evaluate the efficiency of the proposed method. we applied it to analysis-by-synthesis system. Furthermore we suggest the possibillity of scalable wideband speech codecs based on band-split structure.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.245-251
• /
• 2015

In this paper, we present a design of PWM-controlled driving device for backlights in LED systems. The system can control either the brightness of the entire screen of backlights of LCD driven by LED or illumination or contrast of each partial segment of the entire screen. The PWM-controlled driving device includes the shift register that shifts the series data according to the clock signal prior to the generation of parallel data. It is also is comprised of a number of registers, a number of counters, a number of comparators, and a number of synchronizing gates (producing the PWM-controlled signals). The proposed device for backlights in LED systems can generate the PWM-controlled signal with a high degree of resolution without the increase of clock frequency. It also contains the PWM-controlled circuit that disperses and restrains the quantized noise.