• Magazine of the Korean Society of Agricultural Engineers
• /
• v.10 no.1
• /
• pp.1394-1408
• /
• 1968

The tidal discharge is defined as the quantity of water flowing through a certain cross-section per unit of time, in contrast to river discharges, tidal discharges change periodically in magnitude and direction. Thus the total volumes of water flowing into again out of the system-called flood volume and ebb volume, respectively, depend on both the tidal and the river discharges. To ditermine the tidal discharge and the flood and ebb volumes of the Yong-san river, the discharges were measured at spring, mean and neap tide and simultaneous gage reading were taken at Samhak-do, Lower Myo-do, Myongsan-ni and Naju. The general procedure for measuring the tidal discharges was as follows. First, several cross-sections were measured and one of them was chosen. First, several cross-sections were measured and one of them was chosen. Then verticals were serected in the chosen cross section. Because comparatively few verticals should be representative of the discharge distribution over the river profile, the selection was done in accordance with the somtimes irregular bottom profile. The velocities were measured with the same current meters. The observations which included water level readings were continued for a period of about 13 hours. The current direction meter, a pyramid shaped resistance body, suspend in the water on a thin wire. The bubble in a circular tilting level fixed to the wire indicates the direction of the current. Reading were taken at intervals of 1m for depths of 10m or less, and for depths over 10m at intervals of 2m, going downwards and upwards. The averages of the two velocities were used for the computation of the discharges. The discharges and the flood and ebb volumes were ditermined by a graphical method. The mean velocities, corrected for their direction when necesary, were ditermined for each time interval and each vertical, and these velocities were plotted against the time. The resulting curves show possible mistakes very clearly, and the effect of observation errors could be reduced. The corrected velocities read from the curve at half-hour intervals were multiplied by the depth at the virtical at the corresponding time. The discharges thus found were ploted against the position of the vertical in the transit and joined by a smooth curve, integration of the curve rendered the total discharges as they occurred of half-hour intervals. Plotting these total discharges against the time yeilded during the day. The flood and ebb volumes were obtained by integration of the total discharge curve.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.3
• /
• pp.3-10
• /
• 2018

In recent years, mechanized construction has become commonplace due to increases in the scale and complexity of construction, and construction machinery is a major factor in successful construction. However, even though the proportion of construction machinery is increasing, analysis of the work capacity of construction machinery is inadequate. In addition, since the standards for all construction machines are currently not defined in quantity-per-unit, the construction period is arbitrarily applied according to the operator at the time of the construction plan. As a result, the construction period of the actual construction is insufficient, and rushed work or construction delays occur. Therefore, in this study, in order to calculate the construction period of the piling work of the pile driver used in the PRD method more accurately than the existing method, the formula for calculating the time required for the piling work of the pile driver was established by collecting piling time data from the daily task reports through the field survey. If the precise construction period of piling work is estimated based on the results of this study, it will be possible to prevent the rushed work and construction delays that occur due to the short construction period.

• Journal of radiological science and technology
• /
• v.11 no.2
• /
• pp.27-64
• /
• 1988

Most hospital administrators in our country have doubted whether or not the size of their hospital personnel staffs, and the personnel management styles implemented are efficient or not. Actually, increased personnel expenditures due to sophisticated specialization of medical practices has become the biggest hospital expense. Therefore, it is said that hospitals can be run move efficiently by implementing reasonable management strategies for hospital personnel management. In this paper, the departments of diagnostic radiography in 16 general hospitals in Seoul, which were classified into 4 groups by the scale of hospital beds, were used as sample cases. Then, the data for the number of X-ray examination by diagnostic item was collected from sample hospitals. The unit hour spent on X-ray examinations in each diagnostic service was quoted from "A Study on setting-up of the relative value units of medical services and on the structure of current fee schedules" written by Mr. Ik Je Seong. The data analysis results are as follows; First, the number of hours per day spent on X-ray examinations in 13 hospitals out of 16 hospitals, was shorter than the general daily working hours (8 hours). Second, in the morning there was not enough time to work for X-ray examinations required, with the available manpower. In the afternoon, however, the situation was diametrically opposed to that in the morning. Third, in light of above results, though most hospitals employ sufficient personnel for the quantity of the actural work, they were always short-handed where their works were performed Fourth, this study tells us that there is a maldistribution of the work in the schedule : too much work for the available personnel in the morning. The following recommendations are resulted from the data analysis described above. First, it is recommended that all out-patients coming again, except specific patients(G. B. or I.V.P. etc) who have to have their X-ray examinations on an empty stomach in the morning among out-patients, be required to visit the hospital in the afternoon. Second, it is recommended that all new out-patients be required to make a reservation in order to equalize the number of patients throughout the day. Third, it is recommended that all in-patients, except specified patients, be arranged to have their X-ray examinations in the afternoon. Fourth, it is recommended that part time workers be employed during peak hours. This recommendation, if applied in a wider scale, would allow hospitals to overcome the problem of the maldistribution of work and personnel, and then more efficient hospital management through the appropirate personnel management procedures could be expected.

• Journal of agriculture & life science
• /
• v.44 no.6
• /
• pp.171-182
• /
• 2010

Water demand and resource at a watershed scale were investigated to prepare for long-term water planning of the Namgang sub-basin. The quantity of water resource was defined as average annual runoff by a simple Tank model with three serial tanks, and water demand for public, industrial, agricultural and the other uses was determined using the per-unit method employed in the Water Vision 2020, the Ministry of Construction and Transportation. The results showed that total amount of water resources in the Namgang sub-basin was estimated as about $935,414{\times}10^{3}m^3/yr$ for a 10-year period from 2000 to 2009 and the water withdrawals in public, industrial, agricultural and other sector were derived as $105,493{\times}10^{3}m^3/yr$, $32,686{\times}10^{3}m^3/yr$, $243,194{\times}10^{3}m^3/yr$, and $81,615{\times}10^{3}\;m^3m^3/yr$, respectively. In addition, the Namgaram Inno-city project could increase the overall water demand by $17,156{\times}10^{3}\;mm^3/yr$ due to the population influx.

• Journal of Coastal Disaster Prevention
• /
• v.5 no.4
• /
• pp.163-172
• /
• 2018

To propose the design technique and the execution manual of the LWFS(Lightweight Foamed Soil) method using dredged soil, the operation system for the test-bed integrated management, and to establish an amendment for the domestic quantity per unit and specifications, and a strategy for its internationalization. In order to utilize the dredged soil from the coastal area as a construction material, we constructed the embankment with LWFS on soft ground and monitored its behavior. As a result, it can be expected that the use of LWFS as an embankment material on the soft ground can improve the economic efficiency by reducing the depth and period of soil improvement as well as the uses of nearby dredged soil. To verify the utilization of the dredged soil as a material for light-weighted roadbed, soft ground and foundation ground, and surface processing, perform an experimental construction for practical structures and analyze the behavior. It is expected to be able to improve the soft ground with dredged soil and develop technique codes and manuals of the dredged soil reclamation by constructing a test-bed in the same size of the fields, and establish the criteria and manual of effective dredged soil reclamation for practical use. The application technology of the dredged soil reclamation during harbor constructions and dredged soil reclamation constructions can be reflected during the working design stage. By using the materials immediately that occur from the reclamation during harbor and background land developments, the development time will decrease and an increase of economic feasibility will happen. It is expected to be able to apply the improved soil at dredged soil reclamation, harbor and shore protection construction, dredged soil purification projects etc. Future-work for develop the design criteria and guideline for the technology of field application of dredged soil reclamation is that review the proposed test-bed sites, consult with the institutions relevant with the test-bed, establish the space planning of the test-bed, licensing from the institutions relevant with the test-bed, select a test-bed for the dredged soil disposal area.

• Journal of Convergence for Information Technology
• /
• v.10 no.12
• /
• pp.201-207
• /
• 2020

In this study, the practicality of unmanned aerial vehicle photography information was identified. Therefore, a total of four consecutive surveys were conducted on the field-level survey areas among the areas subject to photography using unmanned aerial vehicles, and the changes in crop conditions were analyzed using pictures of unmanned aerial vehicles taken during each survey. It is appropriate to collect and utilize photographic information by directly taking pictures of the survey area according to the time of the on-site survey using unmanned aerial vehicles in the field layer, which is an area where many changes in topography, crop vegetation, and crop types are expected. And it turned out that it was appropriate to utilize satellite images in consideration of economic and efficient aspects in relatively unchanged rice paddies and facilities. If the survey area is well equipped with systems for crop cultivation, deep learning can be utilized in real time by utilizing libraries after obtaining photographic data for a certain area using unmanned aircraft in the future. Through this process, it is believed that it can be used to analyze the overall crop and shipment volume by identifying the crop status and surveying the quantity per unit area.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.5
• /
• pp.65-76
• /
• 2022

The New Excellent Technology (NET) designation system, introduced in 1989 for the purpose of promoting the development of domestic construction technology and enhancing national competitiveness, reviews the statement of construction cost of new technologies. And the cost reduction effect such as design, construction, and maintenance cost and the effect of reducing the construction duration are evaluated as an evaluation criteria of economic feasibility. However, in this evaluation process, differences of opinion between the institution of construction cost estimating standard management and the new technology developer about unique technologies frequently occur. In addition it is difficult to objectively compare the construction duration with existing similar technologies because there is no information on productivity as the current cost estimating standards for new technologies only present the required amount per unit quantity. In this study, the current state of cost estimating criteria review procedure, evaluation criteria, and cost estimating standards establishment method were analyzed when screening for the designation of a new construction technologies, and compared with overseas cost estimating standards, measures to improve the cost estimating standards of current construction new technologies were suggested. Through the improved cost estimating standards of this study, it is expected that cost information on new technologies will be provided to clients in more detail than the current ones, and the availability and applicability of new construction technologies would be improved by simplifying the construction cost calculation process more.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.30-42
• /
• 2022

OSC is a type of supply chain and value chain that spans the entire process of construction production (planning, design, construction, maintenance, etc.). It is a method of producing the final object by manufacturing it in a factory, transporting it to the site, installing and construction. This research as is the construction cost was compared for each case A, which applied the PC method, and case B, which applied the RC method. In the case of applying the PC method (excluding the PC design cost), compared to the case where only the RC method was applied, the frame construction cost per unit quantity (m³) increased by about 70% (50% based on the total RC construction type). Of the total frame construction cost of PC method application, PC accounted for 90.2%, 'PC manufacturing cost' 54.8%, 'PC assembly cost' 28.5%, and 'transportation cost' accounted for 6.89%. Also a decision-making framework that can consider both costs and benefits was established. In the case of benefits, the construction period, defect repair, disaster occurrence, energy efficiency, noise/dust/waste, and greenhouse gas emission indicators reflecting OSC technical advantages were presented. It can contribute to providing a basis for helping decision-making on the introduction of PC apartment houses using OSC.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.2
• /
• pp.129-139
• /
• 2002

Fish distribution characteristics are essential to assess and estimate fisheries resources in a particular area. The primary goal of this study is to determine the distribution characteristics by the bottom trawling in the Yellow Sea west of South Korea. The surveys were carried out between 33$^{\circ}$00'N~37$^{\circ}$00'N latitude and 124$^{\circ}$00'E~126$^{\circ}$00'E longitude at EEZ(Exclusive Economic Zone) of Korea in Yellow Sea on May and August, 1999 and April, 2000. The ships used in this survey were the R/V Chung-kyeong(G/T 300) and R/V Dong-baek(G/T 1,050) of Yeosu National University. The results obtained can be summarized as follows 1. From the trawl data the fisheries resources are seriously decreasing through most of the species(about more 50%) have been appeared only one time at the bottom trawl on April, 2000. The total fish species caught by the trawl net during the 3 times survey were 106 species and a few species(dominant species) of these occupied 50~90% of the quantity of the total quantity by number or by weight. Among the dominant species the tanaka's snailfish was recorded to be the most dominant species in the survey area. The fish species in the Yellow Sea were clustered according to the regions. They clustered in two or three partes to the south-north direction in the spring season and clustered in two parts to the on-off shore direction of the shore in the summer season. Most of the fish caught at the the trawl net with cover-net(30.3mm) were small sized. They were shorter than 15 cm in length and the extruding rate of the cod-end which was 60mm mesh size ranges about 90%. 2. The densities of the number and weight per unit volume derived from the total catches sampled in April, 2000 survey were $1532.2{\times}10^{-6}fish/m^3$ and $39.55{\times}10^{-6}kg/m^3$, respectively. 3. The density variation of fish population between 1999 and 2000 showed a slight tendency to increase.

• Journal of Society of Preventive Korean Medicine
• /
• v.8 no.2
• /
• pp.141-156
• /
• 2004

Objectives : JianTeng-Yuan(交藤圓) is said to be a prescription for preservation of health in ${\ulcorner}$HuaTuo ZhongZangJing(華陀 中藏經)${\lrcorner}$. It is known to have the effect of Bu-Shen(補腎: strengthening kidney) and Yi-Shou(益壽: prolonging the span of one's life). This study investigates whether JTY is effective on inhibition of oxidation stress. Methods : Sprague-Dawley Rats(12-week-old, weight $300{\pm}20g$) were divided into 3 groups. Normal group(n=8) was injected PBS(1ml/body, s.c) at the back neck's skin. Control group(n=8) was injected D-galactose(50mg/kg, 1ml PBS/body, s.c) to induce pathological animals. JTY group was injected the same treatment for the Control group, and fed containing JTY(10%). The whole groups were treated 1 time per day for 6 weeks. After rats were sacrificed and anti-oxidant enzyme(SOD, CAT, G-px) activity, GSH quantity of RBC and tissue(heart, liver and kidney), plasma Vit-C quantity were examined. Besides, the MDA levels of liver and kidney, lipofuscin of heart and endurance of erythrocyte membrane were measured. Results : In the JTY group, RBC's SOD activity decline was halted by 21% of the normal level, compared to the control group ; G-px activity(unit/g of Hb) increased significantly, compared to the normal group ; and the level of Vit-C in plasma increased by 16%. Heart's SOD activity was kept at the same level as that of the normal group ; and CAT activity decline was halted by 26%. Kidney's CAT and G-px activities were kept at the same level as that shown in the normal group, implying the existence of halting effect. Liver also showed a slight halting effect against the decline of anti-oxidant ability, but the effect was not significant(a=0.05). A comparison between the levels of peroxide in SD rats showed that the level of TBARS in plasma increased significantly in the control group and that it was normal in the JTY group. The livers in the JTY group, compared to those in the control group, showed 36% halting effect of the normal level while their kidney's indicated the level significantly lower than the normal level. Heart's lipofuscin increased significantly in the control group, but was alike in both the JTY and the normal groups. Endurance of erythrocyte membrane(%) decreased significantly in the control group while it was kept at the similar level in both the JTY and the normal groups, indicating the halting effect. Conclusions : This study suggests that JTY is effective to defend oxidation stress caused by D-galactose in the animals. It showed that the anti-oxidant ability was maintained and strengthened. On the other hand, it reduced the level of peroxide in animals. In sum, JTY appeared to have the equilibrium normal physiological function in SD rat.