• 한국국방경영분석학회지
• /
• 제6권2호
• /
• pp.27-46
• /
• 1980

Computer model for calculating the maximum detection range of the pulse radar used for surface surveillance is developed, and the detailed procedures of each theoretical step are discussed. The quantity of radar antenna's receiving energy, transmitting energy and noise level are compared in this model. All the calculation steps are programmed in BASIC language. Finally, I have found the output of this model well matched with the some experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.284-286
• /
• 2000

This paper presents the results of monitoring for measuring characteristics of Linear Oscillatory Actuator we used LabVIEW software. The results is divided into two parts, thats is part for electrical quantity calculation, mechanical quantify calculation detecting part.

• 한국건축시공학회지
• /
• 제8권2호
• /
• pp.63-70
• /
• 2008

Reinforcing steel work plays an important role in terms of its structural performance or weight of construction cost for reinforced concrete structures. Precise estimation of re-bar quantity gives a basis for managing the reinforcing steel work effectively. However, the estimation process is still performed ineffectively based upon the expert's experience or manpower in spite of the advanced technology or improvement efforts. Therefore, the purpose of this research is to develop a prototype system for taking-off the quantity of reinforcing steel bars quickly and accurately in an order consistent with the specific members identified on the drawings. An estimate algorithm considering the connection, settlement and coating thickness of re-bars was suggested regarding to their replacement conditions which places more emphasis on constructibility. Also, this system produces the shop drawings automatically with the calculation results with work zone information.

• 대한기계학회논문집
• /
• 제11권1호
• /
• pp.177-188
• /
• 1987

본 논문에서는 연소기체의 열력학적 평형조성 계산을 위한 수식을 Gibbs의 자 유에너지 최소화법에 의하여 유도하고 이를 컴퓨터 프로그램화하여, Table 1의 특성을 지닌 연료에 대하여 ⅰ) 연소공기량에 따른 평형조성 및 단열불꽃온도, ⅱ) 연소온도 변화에 따른 평형조성의 변화를 계산함으로써 연소기체의 생성기구를 열력학적으로 해 석하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권2호
• /
• pp.219-226
• /
• 2017

These days, the great part of design processes in the field of ship or offshore manufacturing are planned and implemented using the CAD system customized for shipbuilding companies. It means that all information for design and production could be extracted and reused at the other useful fields which need cost considerable time and efforts. The typical example is the field of welding material quantity evaluation which is demanded during the construction of ship or offshore structures. The proper evaluation of welding material to be used and the usage of them at the stage of schedule planning are mostly important to achieve the seamless process of production and costing in advance. This study is related to the calculation of welding length and needed welding material quantity at the stage of design completion utilizing the customized CAD system. The calculated welding material quantity would be classified according to welding posture, assembly stage, block, bevel and welding type so as to improve the accuracy of total cost evaluation. Moreover it is possible to predict the working time for welding operation and could be used efficiently for the cost management using the results of this research.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제7권6호
• /
• pp.701-708
• /
• 2017

건축공사는 설계단계에서 도면을 바탕으로 예상되는 비용이 산정되며, 소요예산의 책정과 예산에 합당한 효율적 공사 방안을 찾게 된다. 정확한 물량산출과 예산책정은 공사의 수익성 여부를 판단하는 척도 중 하나로 매우 중요하다. 하지만 이러한 과정이 대부분 인력이나 2D 도면에 의존하여 수행되기 때문에 오차가 발생하기 쉬웠고, 자동화가 가능한 BIM(Build Information Modeling) 프로그램은 매우 고가이기 때문에 현장에서 적용하기 어려운 시점이다. 이에 본 연구에서는 3차원 모델링 소프트웨어인 스케치업을 이용하여 3D 건축모델링을 수행하고, 물량산출을 할 수 있는 방법론을 제시하고자 하였다. 연구 결과, 건축물의 2D 도면을 이용하여 효과적으로 3D 모델링을 수행하였으며, 모델링 결과를 기반으로 2D 도면과 3D 모델링을 통한 물량산출의 차이를 산출할 수 있었다. 연구를 통해 스케치업을 활용한 3D 모델링과 물량산출이 기존의 2D 산출식의 오류를 방지할 수 있다는 가능성을 제시하였다. 지속적인 연구를 통해 연구방법의 활용성이 검증된다면 건축 모델링과 물량산출 업무 효율성 증가에 크게 기여할 것이다.

• 복식문화연구
• /
• 제5권4호
• /
• pp.130-158
• /
• 1997

This study outputs calculation of regression of each items for production of torso basic pattern according to 6 body types as the result of another study and intends to present drawing method of torso model by short measure method modified and supplied and supplied by experiments of wearing clothing. SAS(Statistical Analysis System) is used for figures management and methods for analysis used are Frequency Analysis, Means Analysis, Regression Analysis, Correlation Analysis, etc. Results are as follows. 1. Correlation analysis is used to output the size necessary for torso prototype drawing by sort measure method and waist front length, back length, crotch length, shoulder point-cerricale-shoulder point, bust circumference, waist circumference, weight, etc, are set up as representative items calculation of regression of each type is suggested. 2. In the result of experiment of the first wearing clothing intended for 5 in each type and the whole 30, to develop torso prototype drawing method by short measure method, as we find some problems of the shape and propriety of neck root circumference line, the position of shoulder point, pulling or hold armpit parts, waist circumference line, the degree of dissatisfaction is high, so the second experiment of wearing clothing is propriety of each part is improved, all items except the length and quantity of shoulder dart, waist in back bodice, clearance quantity of hip circumference, and the place of shoulder line in side bodice. So, it was modifed and supplied and then the third torso prototyped drawing method by shout measure method was suggested. The third prototype drawing method was suggested, by modifying and supplying.

• Journal of Construction Engineering and Project Management
• /
• 제3권4호
• /
• pp.1-4
• /
• 2013

Excavation is most commonly used activity in all construction projects. All contracting agencies prefer to use bigger and heavier excavators and dumpers on site to do excavations if quantity of excavation is huge. Estimation of required number of excavators and dumpers for completion of excavation could be rather a tedious process involving repetitive calculation on which professionals spend their valuable time. As the Information Technology is highly involved in construction section there os need to have IT model for estimation of number of excavators and dumpers. The developed model is useful to calculate required equipments within short period of time. The purpose of the developed IT model is to save the time and efforts of the construction professional. The paper discusses about model which can be used on site to estimate numbers of excavators and dumpers required for completion of certain quantity of excavation within the given time. The calculation considers various existing formulas and method to generate the output. This information could certainly be useful in planning equipments on construction project sites. The tool is user friendly where any non IT background person can use it on construction sites.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.90-96
• /
• 1999

In contracts for sales of natural gas between sellers and buyers, it is not suncient to only measure a volumetric quantity of gas in flowing conditions in metering station. Therefore the measured volumetric quantity must be converted to that of reference conditions. The density of the natural gas required in such a calculation can be measured directly or estimated from the equation of sate or any other experimental methods. The specific gravity meter is the apparatus used to measure the density of fluids under the reference conditions and it can be widely used in industrial areas, especially in massive flow rate natural gas industry. This study has been carried out in an attempt to improve measurement accuracy of natural gas flow rate calculation, providing the adequate installation and proper operation conditions of specific gravity meter. The test results are 1) the density measurement errors in case of using methane and standard gas as calibration gases are smaller than using methane and nitrogen gas, 2) the periodical calibration to maintain accurate density measurements is essential, and 3) the specific gravity meter is sensitive to changes of environmental conditions, especially environmental temperature surrounding the specific gravity meter.

• 대한한의학원전학회지
• /
• 제35권4호
• /
• pp.1-9
• /
• 2022

Objectives : This study aims to increase efficiency of the prescription similarity analysis method that uses drug composition ratio. Methods : The controlled experiment compared result generation time, generated data quantity, and accuracy of results between previous and new analysis method on the 12,598 formulas and 61 prescription groups. Results : The control group took 346 seconds on average and generated 768,478 results, while the test group took 24 seconds and generated 241,739 results. The test group adopted a selective calculation method that only used overlapping data between two formulas instead of analyzing all number of cases. It simplified the data processing process, reducing the quantity of data that is required to be processed, leading to better system speed, as fast as 14.47 times more than previous analysis method with equal results. Conclusions : Efficiency for similarity analysis could be improved by reducing data span and simplifying the calculation processes.