• 한국BIM학회 논문집
• /
• 제3권3호
• /
• pp.9-18
• /
• 2013

In case of applying the BIM method in the civil engineering of irregularly shaped structure, BIM method began to be introduced in the current building engineering area compared with the expected effects of the relatively high construction productivity has been recognized. In this paper, I have developed quantity calculation algorithms applying it to earthwork and bridge construction, tunnel construction, retaining wall construction, culvert construction and implemented BIM based 3D-BIM Modeling quantity calculation. Structure work in which errors occurred in range between -6.28% ~ 5.17%. Especially, understanding of the problem and improvement of the existing 2D-CAD based of quantity calculation through rock type quantity calculation error in range of -14.36% ~ 13.07% of earthwork quantity calculation. It's benefit and applicability of BIM method in civil engineering. In addition, routine method for quantity of earthwork has the same error tolerance negligible for that of structure work. But, rock type's quantity calculated as the error appears significantly to the reliability of 2D-based volume calculation shows that the problem could be. Through the estimating quantity of earthwork based 3D-BIM, proposed method has better reliability than routine method. BIM, as well as the design, construction, maintenance levels of information when you consider the benefits of integration, the introduction of BIM design in civil engineering and the possibility of applying for the effectiveness was confirmed. In addition, as the beginning phase of information integration, quantity document automation program has been developed for activation of BIM. And automatically enter the program code number, linkage and manual volume calculation program, quantity document automation programs, such as the development is now underway, and step-by-step procedures and methods are presented.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.594-595
• /
• 2006

Porous bearings are lubricated the oil that is contained in porous metal. Then they are always used with no oil supply, because of that, widely used electric motors. But, if oil flow out less than the limit, troubles often happen. This report shows that attempt of estimating oil quantity in porous bearing by using calculation that based Reynols' equation and Darcy's law, aimed of developing long life bearing. And comparing with experimental and calculation result, we show possibility of estimating rest oil quantity in porous bearing at steadry state by calculation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.329-330
• /
• 2021

The calculation of the correct construction value in the construction should be investigated after the quantity is calculated. In order to calculate the quantity requires a lot of cost and time, and the initial accurate quantity calculation is not possible. Therefore, in the planning step in order to successfully complete the project to demonstrate the practicality of the difference between the construction cost by the construction design by presenting a method for calculate the quantity through the estimate with the construction open, floor plan, surface view, section.

• Journal of Advanced Marine Engineering and Technology
• /
• 제5권1호
• /
• pp.28-33
• /
• 1981

The characteristics of typical 35 kinds of domestic anthracites among 155 kinds are studied to find the calculation formula for the required quantity of air and the combustion gas quantity. 1) The author's calculation formulae are as follows: ${A_0}={\frac{1, 000}{1, 064}}{H_1}+0.086(Nm^3/kg)$ ${G_0}={\frac{1, 000}{1, 110}}{H_1}+0.234(Nm^3/kg)$(1) Theoretically required quantity of air (2) Theoretical quantity of combustion gas 2) Theoretical quantity of air in combustion of domestic anthracite is always estimated more with Rosin's formula than author's one in the typical domestic anthracites which have the lower calorific value between 3, 000-8, 000 Kcal/kg and the difference of the calculated quantity of air becomes small, as the calorific value increases. 3) Theoretical quantity of combustion gas is estimated more by author's formula than by Rosin's one with the domestic anthracites which have more calorific value than 6, 700 Kcal/kg and is estimated less in the under range of the above calorific value. 4) Theoretical quantity of required air and quantity of combustion gas of domestic anthracite show ${\pm}$4% difference by Rosin's formulae in comparison with results of actual analysis, and about ${\pm}$1.5% by the author's one.

• 대한토목학회논문집
• /
• 제36권2호
• /
• pp.277-283
• /
• 2016

최근 국내외에서 3차원 설계 및 건설정보모델링(BIM, Building Information Modeling)에 대한 관심이 증가하고 토목 구조물의 3차원 설계와 물량 산출 방법에 대한 연구가 진행되고 있다. 그러나 도로나 철도의 교량 및 터널과 같은 구조물 중심의 설계 및 물량 산출에 대한 연구는 많이 진행되고 있지만 토공이 중심인 공정에 대한 물량 산출 방안 및 그 결과에 대한 연구는 부족한 실정이다. 따라서 본 연구에서는 원 지표면과 최종 토공면을 불규칙한 경우와 일정한 경사를 가진 경우로 구분하여, 3차원 설계를 진행하였다. 3차원 설계 및 물량 산출 결과 2차원 설계에서 적용되는 양단면 평균법에 대하여 복합토량법이 최대 5%정도 오차가 발생하는 것으로 나타나 3차원 설계에 대한 물량 산출방법 적용시 주의가 필요하며, 산출 결과와 함께 산출 방법도 같이 명기되어야 할 필요가 있는 것으로 나타났다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.193-194
• /
• 2014

Green Frame is a building frame system composed of precast concrete columns and beams. For the construction to run smoothly, the quantity of frames should be estimated in the planning phase and a plan on production of members should be established in connection with the overall work plan. The algorithm for calculation of the amount of forms used in Green Frame automatically estimates the quantity of forms using the design structure prepared in the design phase. The number and area of forms are calculated using the member size drawn from the structure design. Based on the quantity calculated, the type and area per form size are estimated to be used in preparing BOQ (Bill of Quantity). Thus, the time required for architectural planning and design can be shortened when the algorithm for calculation of the amount of forms is applied. This study is on the basic research of calculating the quantity of forms using the structure design and of the algorithm for calculation of the amount of forms used for production of composite PC members.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.151-152
• /
• 2012

Recently, there are growing interests in building LCCO₂ Assessment to reduce carbon emissions. However, existing methods of assessment system include inefficiency in the process of CO₂ calculation requiring considerable data input. Therefore, the purpose of this study is to develop an efficient building assessment system appropriate to material production in construction stage. To that end, quantity input technology was limited to data mapping. Also quantity calculation based on work breakdown structure and item codes consisted of hierarchical structure that is based on facet classification were analyzed. As a result, connectivity links of quantity calculation and CO₂ functional units through item codes for data mapping, and assessment system including calculation and database parts were developed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.227-228
• /
• 2022

In order to achieve the goal of cost management, which is one of the three major management goals of building production, this paper introduces an approximate cost estimating automation technology in the design stage as the importance of predicting construction costs increases. BIM is used for accurate estimating, and the quantity of structural members and finishing materials is calculated by creating a 3D model of the actual building. However, only 2D basic design drawings are provided when making an estimating. Therefore, for accurate quantity calculation, digitization of 2D drawings is required. Therefore, this research calculates the quantity of concrete structural members by calculating the area for the recognition area through 2D drawing recognition technology incorporating computer vision. It is judged that the development technology of this research can be used as an important decision-making tool when predicting the construction cost in the design stage. In addition, it is expected that 3D modeling automation and 3D structural analysis will be possible through the digitization of 2D drawings.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.225-230
• /
• 2005

This paper describes determination of optimal lubricant quantity for driving gear unit. The purpose of selecting optimal lubricant quantity is to evaluate durability of driving gear unit. Lubricant quantity of driving gear unit is important factor affecting durability. The determination methode of lubricant quantity evaluation is used calculation necessary lubricant quantity first, then selection of optimal oil quantity as a base for moving of oil temperature according to changing oil quantity.

• 한국지반공학회논문집
• /
• 제27권8호
• /
• pp.63-71
• /
• 2011

대부분 비정형 구조물인 토목분야에서 BIM(Building Information Modeling) 기법을 적용할 경우 현재 BIM 기법이 도입되기 시작한 건축분야와 비교해 상대적으로 건설 생산성 향상의 기대효과가 높을 것으로 인식되고 있다. 본 연구에서는 NATM공법 터널을 대상으로 BIM기반 3D 모벨링을 통한 물량산출을 실시하여 기존의 2D기반의 물량산출과 비교, 오차분석을 수행하였다. 그 결과 구조물공에 있어서는 오차범위가 0.00%~-1.45%로 아주 작게 나타났으나, 토공에 있어서는 오차범위가 -19.78%~35.30%로 대단히 크게 나타났다. 이를 통해 기존 2D기반 구조물공 물량산출의 경우 0.00%~5.00%의 할증률을 감안하여 본다면 BIM기반 물량산출과의 오차가 무시할 정도로 나타남에 따라 BIM기반 3D 모델링을 통한 자동 물량산출의 신뢰성을 확인하였다. 또한 토공의 경우는 토공전제의 물량산출 오차는 구조물공과 동일하게 오차가 무시할 정도이지만, 암별 물량산출 오차가 크게 나타남으로서 2D 기반 물량산출의 신뢰성에 문제가 있음을 알 수 있었다. 따라서 토공은 반드시 BIM기반 3D 모델링을 통한 물량산출을 수행하여 물량산출의 신뢰성을 확보해야하는 사항이라 판단되며, BIM의 설계, 시공, 유지관리 단계의 정보통합의 장점을 고려하여 토목분야에서의 BIM 설계기법 도입에 대한 효용성 및 적용 가능성을 확인하였다.