• 전기학회논문지
• /
• 제67권10호
• /
• pp.1344-1352
• /
• 2018

In this paper, we propose a two-port S-parameter data to diagnose the fault conditions of a single-phase transformer. Using the S-parameters we can measure the reflection and transmission characteristics of signal power at the port of a transformer, which can also be converted into ABCD parameters and Z parameters through a well-known conversion formulas. Transformer fault diagnoses can be performed based on the intuitive and qualitative/quantitative characteristics of the these parameters. In addition, we can obtain wide frequency characteristics at the primary and secondary sides of the transformer, which can be used to get time domain responses using the inverse Fourier transformation with some specific input waveform. In order to verify the effectiveness of the proposed method, the fault conditions were analyzed in simulation and experiment for 3 kVA single phase transformer with 15: 5 turns ratio, and the validity of the proposed method was verified.

• 농약과학회지
• /
• 제6권4호
• /
• pp.231-243
• /
• 2002

자유 에너지 직선관계(LFER)를 위시하여 약효와 잔류 지속성은 물론, 전이상태 착물을 모방하기 위한 농약들의 가수분해 반응 메카니즘과 그 필요성에 대하여 논의하였다. 또한, 정량적인 구조-활성상관(QSAR) 기법을 활용하여 새로운 농약을 탐색하고 개발하는데 있어서 생물활성을 구체적으로 이해하기 위하여 양자 약리학적 파라미터를 포함한 전자효과, 입체효과 및 소수성 효과 등의 설명 인자들과 그 활용 연구 사례 그리고 새로운 농약의 개발 과정에 대하여 간략하게 요약하였다.

• Structural Engineering and Mechanics
• /
• 제67권1호
• /
• pp.53-67
• /
• 2018

The changes of parameters of pressure and velocity of propagation of elastic pressure and shear waves in uniformly deformed solid compressible media are studied within the nonclassically linearized approach (NLA) of nonlinear elastodynamics to create a new theoretical basis of the geomechanical interpretation of various groups of geophysical observational and experimental data. The cases of small and large deformations are considered while their describing by various elastic potentials, i.e., problems considering the physical and geometric nonlinearity. Convenient analytical formulae are obtained to calculate the indicated parameters in the deformed isotropic media within the nonclassical linear and nonlinear solution in the NLA. Specific numerical experiments are conducted in case of overall compression of various materials. It is shown that the method (generally accepted in the studies of mechanics of standard constructional materials) of additional linearization (relative to the pressure parameter) in the basic correlations of the NLA introduces substantial quantitative and qualitative errors into the results at significant preliminary deformations. The influences of the physical and geometric nonlinearity on the studied characteristics of the medium are large in various materials and differ qualitatively. The contribution of nonlinear components to the values of the considered parameters prevails over linear components at large deformations. When certain critical values of compression deformations in the medium are achieved, elastic waves with actual velocity cannot propagate in it. The values of the critical deformations for pressure and shear waves differ within different elastic potentials and variants of the theory of initial deformations.

• 한국조경학회지
• /
• 제27권4호
• /
• pp.143-150
• /
• 1999

The purpose of this research is to find som ways to model tree forms more efficiently in reference with surveying structural data and handling parameters in plant Editor of AccuRender, the AutoCAD-based rendering software adopting the procedural plant modeling technique. In case of modelling a new tree, because it is efficient to modify an existing tree data as a template, we attempted to classify 81 species' data from existing plant library including conifers and deciduous tree. According to the qualitative characteristics and quantitative parameters of geometrical and branching structure, 8 types of tree form were classified with factor and cluster analysis. Some critical aspects found in the distributions of standardized scores of parameters in each type were discussed for explaining the tree forms intuitively. For adaptability of the resulted classification and typical parameters, 10 species of tree were measured and modelled, and proved to be very similar to the real structures of tree forms. CG or CAD-based plant modelling technique would be recommended not only as a presentation tool but for planting design, landscape simulation and assessment.

• 재활복지공학회논문지
• /
• 제1권1호
• /
• pp.13-19
• /
• 2007

본 논문에서는 복압성요실금의 병적 진행 정도를 정량적으로 진단하기 위한 진단 알고리즘을 제안하였다. 생체신호 측정 시스템을 개발하여 복압성요실금 환자로부터 골반저근의 수축압력을 측정하였고, 데이터를 분석하여 진단 파라미터를 추출하였다. 진단 파라미터의 통계적 평가를 수행하여 상관성이 높은 순서로 진단 파라미터를 분류하였으며, 상관성이 높게 나타난 파라미터로부터 Y/N 테이블을 제작하여 요실금의 정도를 정량적으로 진단할 수 있는 진단 알고리즘을 구현하였다.

• 센서학회지
• /
• 제19권6호
• /
• pp.490-496
• /
• 2010

In this study, in order to overcome the weakness of acoustic field analysis which is generally used for ultrasonic probe performance evaluation, automatic acoustic field measurement system and evaluation parameters were proposed. The comparisons between acoustic field simulation and measured acoustic distribution data of normal and abnormal channels were conducted to evaluate the availability of proposed system and evaluation parameters. First, the impulse response characteristic of sample probe was investigated to classify the normal elements and abnormal elements. And then, normal channels and abnormal channels with abnormal element were chosen. The suggested 12 evaluation parameters were calculated using the acoustic fields of these channels. The availability of proposed automatic acoustic field measurement system and evaluation parameters was confirmed. And the performance evaluation of ultrasonic probe using acoustic field analysis could be easier and faster.

• 대한물리치료과학회지
• /
• 제31권1호
• /
• pp.70-87
• /
• 2024

Background: This study aimed to investigate the effect of Y-balance exercise on spatio-temporal gait parameters in subjects with chronic ankle instability. Design: Randomized Controlled Trial. Method: A study was conducted on 43 people with chronic ankle instability. Subjects performed modified Y-balance exercise 3 times a week for 50 minutes, 4 weeks. Gait parameters were measured using a gait analysis treadmill before exercise, 2 weeks after exercise, and 4 weeks after exercise. A gait analysis treadmill (FDM-T AP1171, Zebris, Germany) was used to measure gait parameters. Mean values were compared using Repeated measured two-way ANOVA. Result:: When comparing the results of three measurements taken before exercise, 2 weeks after exercise, and 4 weeks after exercise, there were significant differences in the qualitative and quantitative aspects of gait in gait variables such as step distance, step time, step ratio, and sway ratio. Conclusions: These results suggest that the Y-balance exercise and various exercises combining balance and proprioception are effective for subjects with chronic ankle instability.

• 한국기계가공학회지
• /
• 제20권8호
• /
• pp.93-98
• /
• 2021

The complex effects of the machining parameters make it is difficult to control and predict surface roughness. The theoretical surface roughness observed during mechanical machining with a round tool is determined by the tool radius and pitch. However, it was revealed that other parameters, such as the depth of cut and cutting speed, also affect surface roughness. This study adapted the Taguchi method, which can analyze the effects of cutting parameters quantitatively with an efficient number of experiments, to optimize the parameters for better surface roughness. Experiments were designed based on an orthogonal array, and the quantitative effects on the surface roughness were analyzed using the S/N ratio. The surface roughness was affected by all parameters, especially the tool radius. The optimum cutting parameter values obtained in this study showed better surface roughness than the other combinations of the parameters.

• 응용통계연구
• /
• 제31권1호
• /
• pp.123-137
• /
• 2018

비선형 혼합효과 모형은 다양한 분야에서 반복 측정 자료를 분석할 때 주로 사용된다. 비선형 혼합효과 모형은 개체 내 변동(intra-individual variation)에 대해 고려하는 제 1단계 개별수준모델(individual-level model)과 개체간 변동(inter-individual variation)에 대해 고려하는 제 2단계 개체군모델(population model)의 두 단계로 구성되어 있다. 비선형 혼합효과 모형의 첫 번째 단계인 개별수준모델은 비선형 회귀모형의 모수를 추정하는 것으로 일반적인 비선형 회귀모형과 같고, 주로 보통최소제곱추정 방법을 사용하여 모수를 추정한다. 그러나 최소제곱추정방법은 가정된 비선형 함수가 자료에 의해 명시적으로 드러나지 않는 경우 모수의 추정값과 그 표준오차가 극단적으로 커지는 문제가 발생할 수 있다. 본 논문에서는 최근에 비선형 회귀모형에서 제안된 능형회귀(ridge regression) 방법을 비선형 혼합효과 모형의 제 1단계 개별수준모델에 도입함으로써 이러한 문제를 해결할 수 있는 새로운 추정방법을 제안하였다. 제안된 추정량은 모의실험 연구를 통하여 기존의 표준적인 추정량과 그 성능을 비교하였다. 또한 미국의 National Toxicology Program으로부터 얻어진 정량적 대량고속 스크리닝(quantitative high throughput screening) 실제 자료를 사용하여 추정 방법들을 비교하였다.

• 대한후두음성언어의학회지
• /
• 제28권2호
• /
• pp.89-95
• /
• 2017

Background and Objectives : High-speed videolaryngoscopy (HSV) is the only technique that captures the true intra-cycle vibratory behavior of the vocal folds by capturing full images of the vocal folds. However, it has problems of no immediate feedback during examination, considerable waiting time for digital kymography (DKG), recording duration limited to a few seconds, and extreme demands for storage space. Herein, we demonstrate a new post-processing method that converts HSV images to two-dimensional digital kymography (2D-DKG) images, which adopts the algorithm of 2D videokymography (2D VKG). Materials and Methods : HSV system was used to capture images of vocal folds. HSV images were post-processed in Kay image-process software (KIPS), and conventional DKG images were retrieved. Custom-made post-processing system was used to convert HSV images to 2D-DKG images. The quantitative parameters of the post-processed 2D-DKG images was validated by comparing these parameters with those of the DKG images. Results : Serial HSV images for all phases of vocal fold vibratory movement are included. The images were converted by the scanning method using U-medical image-process software. Similar to conventional DKG, post-processed 2D DKG image from the HSV image can provide quantitative information on vocal fold mucosa vibration, including the various vibratory phases. Differences in amplitude symmetry index, phase symmetry index, open quotient, and close quotient between 2D-DKG and DKG were analyzed. There were no statistical differences between the quantitative parameters of vocal fold vibratory movement in 2D-DKG and DKG. Conclusion : The post-processing method of converting HSV images to 2D DKG images could provide clinical information and storage economy.