• 제목/요약/키워드: Quantitative parameters

검색결과 1,134건 처리시간 0.023초

디지털방사선시스템에서 IEC표준을 이용한 방사선 영상 품질의 평가 (Evaluation of Image Quality for Radiographic Positioning using IEC Radiation Quality in the Digital Radiography System)

  • 안현;김창수;김정훈
    • 한국콘텐츠학회논문지
    • /
    • 제15권7호
    • /
    • pp.289-299
    • /
    • 2015
  • 본 연구의 목적은 디지털방사선시스템의 영상 품질을 비교하고 평가함에 있다. 영상의 정량적인 분해능을 나타내는 변조전달함수, 노이즈 특성을 나타내는 잡음력 스펙트럼을 이용하여 영상 품질평가를 하였다. IEC61267 선질을 사용하여 IEC62220-1에서 제시하는 기하학적인 조건과 실제 임상에서 사용되어지는 기하학적인 조건을 사용하여 부가필터 및 그리드, 임상선량을 이용하여 edge 팬텀을 사용하여 MTF값을 측정하였다. Grid, Filter, SID, kVp, mAs에 따른 MTF 결과는 임상조건 100, 180cm 와 IEC62220-1 기하학적인 조건 150cm에서 MTF 공간주파수 측정값은 비슷하게 나타났으며, 오히려 임상조건 100, 180cm에서 공간주파수가 높은 경우도 있었다. NPS 결과는 선량이 증가함에 따라 감소함을 나타내었다. IEC61267 선질을 이용한 영상품질평가에서는 IEC62220-1기하학적인 조건을 이용한 품질평가보다 임상조건 기하학적인 조건을 사용한 영상의 품질이 좋았다. IEC 와 임상조건에서의 MTF와 NPS는 크게 차이가 나지 않았음을 알 수 있었다. 그러므로 향후 IEC 표준에서 제시하는 영상품질 평가보다는 임상 조건을 적용한 영상품질 평가방법을 적용하기 위해서 부가필터사용 유 무, 그리드사용 유 무, SID변화, 선질, 선량 등의 파라메터를 적절히 이용하여 가장 적은 선량으로 공간분해능이 좋고, NPS가 감소하는 방법들을 찾는다면 향후 실제 임상에서 사용되고 있는 디지털방사선시스템을 최적의 품질로 유지할 수 있는 참고 자료로 활용될 수 있을 것으로 사료된다.

국내 금속겸용용기의 연소도 이득효과 적용 시 주요영향인자에 따른 정량적 핵임계 평가 (Quantitative Evaluation of Criticality According to the Major Influence of Applied with Burnup Credit on Dual-purpose Metal Cask)

  • 도호석;김태만;조천형
    • 방사성폐기물학회지
    • /
    • 제13권2호
    • /
    • pp.141-154
    • /
    • 2015
  • 경수로 사용후핵연료 수송/저장용기의 핵임계 해석은 사용후핵연료내의 악티나이드핵종 및 핵분열생성물 함유량에 대한 불확실성을 이유로 신연료로 가정된 가상의 연료를 선정하여 평가해오고 있다. 그러나 이러한 평가방법은 용기 설계 시 과도한 임계여유도를 유도하여 경제적 손실을 유발할 수 있는 단점이있다. 이와 같은 단점을 극복하기 위하여 최근 연소도이득효과(burnup credit, BUC)를 반영한 수송저장용기의 설계 및 상용화를 위한 연구가 추진되었다. 이에 본 연구에서는 한국원자력환경공단에서 개발중인 금속겸용용기를 대상으로 연소도 이득효과적용 시 핵임계 안전성(criticality safety)에 영향을 미칠 것으로 예상되는 '노심 운전인자', '축방향 연소도 분포', '오장전 사고상황'에 대하여 핵임계 평가를 수행하였다. 그 결과 노심운전인자 중 저농축, 고연소도일 때 비출력에 따른 핵임계 변화가 크게 평가되었으며, 고연소도 사용후핵연료에서 End effect가 양의 값을 나타내었다. 특히 오장전에 의한 유효증배계수는 최대 0.18467증가하였으므로, 연소도이득효과를 적용 할 경우 필수고려사항임을 확인하였다. 본 연구결과는 국내모델(금속겸용용기)의 연소도 이득효과 적용기술 개발 및 사용 후핵연료 장전 시 일어날 수 있는 오장전 사고를 방지하기 위한 운영절차 개발에 참고자료로 활용될 수 있다.

스쿼시 백핸드 드라이브 동작시 상지 분절의 운동학적 변인 분석 (The Kinematic Analysis of the Upper Extremity during Backhand Stroke in Squash)

  • 안용환;류지선;류호영;소재무;임영태
    • 한국운동역학회지
    • /
    • 제17권2호
    • /
    • pp.145-156
    • /
    • 2007
  • The purposes of this study were to investigate kinematic parameters of racket head and upper extremities during squash back hand stroke and to provide quantitative data to the players. Five Korean elite male players were used as subjects in this study. To find out the swing motion of the players, the land-markers were attached to the segments of upper limb and 3-D motion analysis was performed. Orientation angles were also computed for angular movement of each segment. The results were as follows. 1) the average time of the back hand swing (downswing + follow-through) was 0.39s (0.24 s + 0.15 s). 2) for each event, the average racket velocity at impact was 11.17m/s and the velocity at the end of swing was 8.03m/s, which was the fastest swing speed after impact. Also, for each phase, 5.10m/s was found in down swing but 7.68m/s was found in follow-through. Racket swing speed was fastest after the impact but the swing speed was reduced in the follow-through phase. 3) in records of average of joints angle, shoulder angle was defined as the relative angle to the body. 1.04rad was found at end of back swing, 1.75rad at impact and it changes to 2.35 rad at the end of swing. Elbow angle was defined as the relative angle of forearm to upper arm. 1.73rad was found at top of backswing, 2.79rad at impact, and the angle was changed to 2.55rad at end of swing. Wrist angle was defined as the relative angle of hand to forearm. 2.48rad was found at top of backswing, 2.86rad at impact, and the angle changes to 1.96rad at end of swing. As a result, if the ball is to fly in the fastest speed, the body has to move in the order of trunk, shoulder, elbow and wrist (from proximal segment to distal segment). Thus, the flexibility of the wrist can be very important factor to increase ball speed as the last action of strong impact. In conclusion, the movement in order of the shoulder, elbow and the wrist decided the racket head speed and the standard deviations were increased as the motion was transferred from proximal to the distal segment due to the personal difference of swing arc. In particular, the use of wrist (snap) may change the output dramatically. Therefore, it was concluded that the flexible wrist movement in squash was very important factor to determine the direction and spin of the ball.

차량 충돌하중을 받는 RC 압축부재의 성능기반형 저항성능 평가방법 개발 (Development of Performance Based Resistance Capacity Evaluation Method for RC Compression Member under Vehicle Impact Load)

  • 김장호;이나현;판덕헝;김성배;이강원
    • 콘크리트학회논문집
    • /
    • 제22권4호
    • /
    • pp.535-546
    • /
    • 2010
  • 최근 교량구조물의 증가와 더불어 차량 및 선박과 시설물 간의 충돌사고가 발생할 확률이 높아지고 있다. 특히 교량을 구성하는 상부구조와 하부구조 중에서 충돌에 의한 영향은 주로 교각 등의 하부구조가 받을 가능성이 크다. 교각에 차량 혹은 선박이 충돌하게 되면 교량 하부구조에 국부적인 손상을 유발하게 되며, 충돌사고는 훨씬 더 순간적이고 강한 물리적인 질량의 충돌을 동반할 수 있으며, 극단적인 경우 상부구조의 붕괴까지 유발할 수 있다. 그러므로 이 연구에서는 콘크리트 구조물인 교량의 교각과 같은 압축부재에 대한 설계 시 차량 등에 의한 충돌을 고려하고, 차량 충돌하중에 의한 손상지수를 정량적으로 평가하기 위해서 기존의 설계방법을 개선하고 새로운 구조물의 저항성능 평가방법을 정립하기 위하여 동적유한요소해석 프로그램인 LS-DYNA를 이용하여 교각단면, 차량의 충돌각에 따른 충격도, 축력 및 축력비, 콘크리트 강도, 주철근비와 횡방향 철근, 세장비 등을 변화시켜 케이스별 해석을 수행하였다. 이 연구 결과를 통해 콘크리트 구조물의 거동해석 및 설계기법을 Bayesian 통계방법을 이용한 만족도 곡선을 통해 충격하중을 받을 시의 성능 기반형 저항성능 평가방법을 개발하였으며, 이는 실제 충격하중에 의한 구조물의 방호성능 및 설계 시에 적절하게 적용할 수 있을 것으로 판단된다.

금속기지 복합재료의 제조 및 성형시에 발생하는 열적잔류응력의 정량적 평가 및 예측에 관한 이론적 연구 (제 1보 : 강화재가 2차원 평면상태로 분포하는 경우) (A Theoretical Study on Quantitative Prediction and Evaluation of Thermal Residual Stresses in Metal Matrix Composite (Case 1 : Two-Dimensional In-Plane Fiber Distribution))

  • 이준현;손봉진
    • 비파괴검사학회지
    • /
    • 제17권2호
    • /
    • pp.89-99
    • /
    • 1997
  • 단섬유강화금속복합재료는 최근 항공기, 자동차산업에 있어서 관심의 대상이 되고 있는 재료중의 하나이나 재료의 제조 및 성형중에 재료내의 기지재 및 강화재의 열팽창계수의 차이로 인해 재료 내부에 발생되는 열적잔류응력으로 인한 재료 특성의 변화로 실제적인 재료 적용상에 많은 문제점들이 보고되고 있다. 이와 같은 금속복합재료의 잔류응력의 평가에는 몇가지 비파괴적 방법이 적용되고 있으나 그 측정에 많은 어려움이 보고되고 있다. 따라서 금속복합재료의 보다 실제적인 응용을 위하여는 이와 같은 열적잔류응력을 평가하기 위한 이론적모델의 확립이 요구된다. 본 연구에 있어서는 비방향성을 가진 강화재가 2차원 평면 상태로 기지재내에 존재하는 단섬유강화금속복합재료에 있어서 재료에 균일한 온도 변화가 주어질 때 기지재와 강화재의 열팽창계수의 차로 인해 재료 내부에 발생하는 열적잔류응력을 평가, 예측하기 위한 이론적 탄성 모델을 확립하고자 한다. 본 연구에서 해석하고자 하는 이론 모델은 Eshelby의 등가 개재물 방법을 토대로 하고 있으며 과거 제안되고 있는 이론모델을 포함하는 보다 일반성을 가지는 해석 모델로서, 이 해석 모델을 이용하여 열적잔류응력에 미치는 강화재의 체적률, 종횡비, 분포 상태, 분포 cut-off 각도들에 대한 각 인자의 영향을 검토하였다. 그 결과 강화재의 체적률, 종횡비, cut-off 각도들이 강화재의 분포 상태보다도 금속복합재료의 열적잔류응력에 미치는 영향이 현저함을 알 수 있었다.

  • PDF

2D-QSAR방법을 이용한 농약류의 무지개 송어 급성 어독성 분석 및 예측 (Prediction and analysis of acute fish toxicity of pesticides to the rainbow trout using 2D-QSAR)

  • 송인식;차지영;이성광
    • 분석과학
    • /
    • 제24권6호
    • /
    • pp.544-555
    • /
    • 2011
  • 본 연구는 농약류에 대하여 구조-활성의 정량적 관계(QSAR)를 이용하여 무지개 송어(학명: Oncorhynchus mykiss)의 급성 독성을 예측-분석하는 과정을 수행하였다. 모델 구현을 위해 사용된 275종의 농약류에 대한 수중 독성(96h $LC_{50}$) 값은 DEMETRA프로젝트의 데이터를 사용하였다. 예측 모델에 사용된 2차원 분자 표현자는 PreADMET프로그램으로부터 계산을 하였고, 선형 (다중 선형 회귀 방법)모델과 비선형(서포트 벡터 머신, 인공 신경망) 학습 방법들은 실험값과 예측값의 적합도를 고려하여 최적화 되었다. 데이터 전처리 과정을 거친 뒤에, 5묶음 교차 검증과정을 포함한 모집단 기반 전진 선택법을 통해서 각 학습 방법의 최적의 표현자 집합을 결정하였다. 가장 좋은 결과는 SVM 방법 ($R^2_{CV}$=0.677, RMSECV=0.887, MSECV=0.674) 이었고, EU의 규제 기준에 따른 분류에서는 87%의 정확도를 나타내었다. MLR방법을 통해서는 무지개 송어의 급성 독성에 대하여 독성을 나타내는 농약류의 구조적 특징과 지질 층과의 상호작용을 설명할 수 있었다. 개발된 모든 모델들은 5묶음 교차 검증과 Y-scrambling test을 통해 검증되었다.

근적외분광분석법과 라만분광분석법을 이용한 트리메부틴말레인산 서방정의 혼합 과정 모니터링 (Real-time monitoring for blending uniformity of trimebutine CR tablets using near-infrared and Raman spectroscopy)

  • 우영아
    • 분석과학
    • /
    • 제24권6호
    • /
    • pp.519-526
    • /
    • 2011
  • 본 연구에서는 위장관에 작용하는 트리메부틴말레인산염을 주성분으로 하는 서방정의 제조 과정 중 혼합과정의 혼합 진행 정도의 확인에 근적외분광분석법과 라만분광분석법을 적용하였다. 서방정의 제조의 혼합 과정에서 소량의 부형제로 콜로이달실리콘디옥사이드, 탈크, 스테아르산, 스페타르산마그네슘을 넣어 혼합하는 과정에서, 각 혼합 시간 별, 혼합기 내에서 구역 별 혼합물 시료를 채취한 후 주성분(active ingredient)인 트리메부틴말레인산염의 양을 HPLC로 분석하였고, 동시에 채취한 시료의 근적외스펙트럼과 라만스펙트럼을 측정하여 PCA (Principal Component Analysis)를 수행하였다. 혼합기로는 U자형 혼합기를 사용하였고, 상, 중, 하와 좌, 우 각각 6개의 영역에서 시료를 채취하여 주성분과 부형제의 분포에 따른 혼합물의 균일도를 확인하고자 하였다. HPLC법으로는 소량의 부형제의 혼합을 주성분을 분석하는 것으로 시간에 따른 혼합도를 확인할 수 없는 반면, 근적외스펙트럼과 라만 스펙트럼에서는 주성분과 각각의 부형제의 특징적인 피크들을 확인할 수 있었고, 이러한 특징적인 흡광도를 가진 영역을 이용하여 전체 혼합물에서의 부형제 영향에 의한 변화를 PCA를 수행하여 혼합의 진행 정도를 성공적으로 확인하였다. 산란의 영향에 의한 바탕선의 변이를 제거하기 위해 전처리 방법으로는 미분을 사용하였고, 근적외스펙트럼에서는 5000-7500 $cm^{-1}$를 사용하였고, 라만스펙트럼에서는 1000-1500 $cm^{-1}$를 이용하여, PCA를 수행하였을 때 효과적으로 혼합의 진행정도를 확인할 수 있었다.

$CCl_4$로 급성 간손상을 유도한 백서에서 인삼엽과 경추출물의 간기능 개선과 항산화 작용 (Improvement of Liver Function and Suppressed Lipid Peroxidation of Extract from Ginseng Folium and Stem in Acute $CCl_4$ Intoxicated Rats)

  • 이민경;박성혜;서의석;김기영
    • 동의생리병리학회지
    • /
    • 제18권5호
    • /
    • pp.1485-1489
    • /
    • 2004
  • Panax ginseng is the one of best famous phytochemical plant in the world and it's various positive effects such as antioxidant, regulation of immunity are very well known. In this study, we investigated primary the cell viability and morphological change and secondary an antioxidative effect and liver function improvement of extract from Ginseng folium and stem in CCl4 intoxicated rats. The NCTC cell line were used for cell viability and sirius red staining before the animal experiment. The female Sprague-Dawley rats (90-100g) were divided into 3 groups (Normal, AC: CCl₄ treated group, GFS: CCl₄+ extract of Ginseng folium and stem treated group) and acute liver damage was developed by one time administration of CCl₄ mixture (0.5㎖/rat). The liver tissue and sera were collected and used for quantitative measurement of enzyme activity (AST, ALT, ALP, BUN), MDA and Hyp. As a result, cell viability in GFS treated group (in concentration of 3.33-33.33㎎ GFS/200㎕ medium) was 180.9-241.0% significantly and dose dependently higher than in control group. And potential state of cell growth and differentiation and no criteria of cytoplasm lysis and nucleus breaking were observed in control and GFS group. The parameters of liver function (AST and ALP) in sera of GFS group showed significantly 93% and 67.6% lower than AC group (p<0.005-0.05). And the level of ALT and BUN showed fast similar in AC group and GFS group. The concentration of MDA in liver was decreased 576.5% significantly in GFS group when compared with AC group (p<0.005). The content of Hyp in GFS group is merely lower than in AC group. In conclusion, the water extract of Ginseng folium and stem such as Ginseng radix may be possessed the antioxidative effect and improvement of liver function in CCl₄ intoxicated rats.

Rheology of concentrated xanthan gum solutions: Oscillatory shear flow behavior

  • Song Ki-Won;Kuk Hoa-Youn;Chang Gap-Shik
    • Korea-Australia Rheology Journal
    • /
    • 제18권2호
    • /
    • pp.67-81
    • /
    • 2006
  • Using a strain-controlled rheometer, the dynamic viscoelastic properties of aqueous xanthan gum solutions with different concentrations were measured over a wide range of strain amplitudes and then the linear viscoelastic behavior in small amplitude oscillatory shear flow fields was investigated over a broad range of angular frequencies. In this article, both the strain amplitude and concentration dependencies of dynamic viscoelastic behavior were reported at full length from the experimental data obtained from strain-sweep tests. In addition, the linear viscoelastic behavior was explained in detail and the effects of angular frequency and concentration on this behavior were discussed using the well-known power-law type equations. Finally, a fractional derivative model originally developed by Ma and Barbosa-Canovas (1996) was employed to make a quantitative description of a linear viscoelastic behavior and then the applicability of this model was examined with a brief comment on its limitations. Main findings obtained from this study can be summarized as follows: (1) At strain amplitude range larger than 10%, the storage modulus shows a nonlinear strain-thinning behavior, indicating a decrease in storage modulus as an increase in strain amplitude. (2) At strain amplitude range larger than 80%, the loss modulus exhibits an exceptional nonlinear strain-overshoot behavior, indicating that the loss modulus is first increased up to a certain strain amplitude(${\gamma}_0{\approx}150%$) beyond which followed by a decrease in loss modulus with an increase in strain amplitude. (3) At sufficiently large strain amplitude range (${\gamma}_0>200%$), a viscous behavior becomes superior to an elastic behavior. (4) An ability to flow without fracture at large strain amplitudes is one of the most important differences between typical strong gel systems and concentrated xanthan gum solutions. (5) The linear viscoelastic behavior of concentrated xanthan gum solutions is dominated by an elastic nature rather than a viscous nature and a gel-like structure is present in these systems. (6) As the polymer concentration is increased, xanthan gum solutions become more elastic and can be characterized by a slower relaxation mechanism. (7) Concentrated xanthan gum solutions do not form a chemically cross-linked stable (strong) gel but exhibit a weak gel-like behavior. (8) A fractional derivative model may be an attractive means for predicting a linear viscoelastic behavior of concentrated xanthan gum solutions but classified as a semi-empirical relationship because there exists no real physical meaning for the model parameters.

초음파검사에서 비알콜성 지방간과 국소지방회피영역에 대한 GLCM Algorithm 영상분석 (GLCM Algorithm Image Analysis of Nonalcoholic Fatty Liver and Focal Fat Sparing Zone in the Ultrasonography)

  • 조진영;예수영
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제40권2호
    • /
    • pp.205-211
    • /
    • 2017
  • 비알콜성 지방간에서 지방 간염으로 진행되는 확률이 높은 중등증 이상에서 적극적인 진단과 치료가 필요하다. 이에 본 연구에서는 비알콜성 지방간을 경도, 중등증, 중증으로 나누어 GLCM 알고리즘의 컴퓨터 분석기법을 이용하여 정량적인 방법으로 분류하였다. 또한 지방간 중에서 국소지방회피영역의 초음파영상의 특징을 알아보고자 하였다. 정상, 경도, 중등도, 중증지방간, 국소적 저지방영역, 각각 80증례를 대상으로 GLCM 알고리즘의 파라미터 중에 간초음파영상의 인식률이 높은 자기상관성, 편차의 제곱, 평균의 합, 분산의 합에 대한 값을 산출하였다. GLCM알고리즘의 파라미터 인식률의 결과는 평균 97.5%로 나타났다. 국소적 저지방 영상분석의 결과는 정상실질과 가장 유사한 값을 나타내었다. 초음파검사는 일차적인 선별검사법으로 쉽게 접근할 수 있지만 숙련도에 따라 검사방법의 정확도나 결과의 일치성 부분에서 차이가 있을 수 있다. GLCM알고리즘을 적용하여 지방간 정도를 정량적으로 분류할 수 있었으며, 국소적 저지방영역은 지방침착이 되지 않은 균질한 간실질임을 예측 가능하였다. 이러한 GLCM 컴퓨터영상분석이 지방간뿐만 아니라 다른 병변의 감별에도 중요한 정보를 제공할 것으로 판단한다.