• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.10
• /
• pp.1344-1352
• /
• 2018

In this paper, we propose a two-port S-parameter data to diagnose the fault conditions of a single-phase transformer. Using the S-parameters we can measure the reflection and transmission characteristics of signal power at the port of a transformer, which can also be converted into ABCD parameters and Z parameters through a well-known conversion formulas. Transformer fault diagnoses can be performed based on the intuitive and qualitative/quantitative characteristics of the these parameters. In addition, we can obtain wide frequency characteristics at the primary and secondary sides of the transformer, which can be used to get time domain responses using the inverse Fourier transformation with some specific input waveform. In order to verify the effectiveness of the proposed method, the fault conditions were analyzed in simulation and experiment for 3 kVA single phase transformer with 15: 5 turns ratio, and the validity of the proposed method was verified.

• The Korean Journal of Pesticide Science
• /
• v.6 no.4
• /
• pp.231-243
• /
• 2002

Starting with linear free energy relationships (LFER), drug design to mimic of the activated complexes at transition state, and hydrolysis mechanisms to control the potency and residual properties of pesticides were introduced and summarized for the necessity. In order to understand the searching or development of new agrochemicals by two dimensional quantitative structure-activity relationship (2D QSAR) methodology, a series of the various descriptors, steric constants, electronic constants including quantum pharmacological parameters and hydrophobic constants were classified and discussed for results of the several studied cases. In addition, the processes of development of new agrochemicals by QSAR techniques were introduced simply.

• Structural Engineering and Mechanics
• /
• v.67 no.1
• /
• pp.53-67
• /
• 2018

The changes of parameters of pressure and velocity of propagation of elastic pressure and shear waves in uniformly deformed solid compressible media are studied within the nonclassically linearized approach (NLA) of nonlinear elastodynamics to create a new theoretical basis of the geomechanical interpretation of various groups of geophysical observational and experimental data. The cases of small and large deformations are considered while their describing by various elastic potentials, i.e., problems considering the physical and geometric nonlinearity. Convenient analytical formulae are obtained to calculate the indicated parameters in the deformed isotropic media within the nonclassical linear and nonlinear solution in the NLA. Specific numerical experiments are conducted in case of overall compression of various materials. It is shown that the method (generally accepted in the studies of mechanics of standard constructional materials) of additional linearization (relative to the pressure parameter) in the basic correlations of the NLA introduces substantial quantitative and qualitative errors into the results at significant preliminary deformations. The influences of the physical and geometric nonlinearity on the studied characteristics of the medium are large in various materials and differ qualitatively. The contribution of nonlinear components to the values of the considered parameters prevails over linear components at large deformations. When certain critical values of compression deformations in the medium are achieved, elastic waves with actual velocity cannot propagate in it. The values of the critical deformations for pressure and shear waves differ within different elastic potentials and variants of the theory of initial deformations.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.143-150
• /
• 1999

The purpose of this research is to find som ways to model tree forms more efficiently in reference with surveying structural data and handling parameters in plant Editor of AccuRender, the AutoCAD-based rendering software adopting the procedural plant modeling technique. In case of modelling a new tree, because it is efficient to modify an existing tree data as a template, we attempted to classify 81 species' data from existing plant library including conifers and deciduous tree. According to the qualitative characteristics and quantitative parameters of geometrical and branching structure, 8 types of tree form were classified with factor and cluster analysis. Some critical aspects found in the distributions of standardized scores of parameters in each type were discussed for explaining the tree forms intuitively. For adaptability of the resulted classification and typical parameters, 10 species of tree were measured and modelled, and proved to be very similar to the real structures of tree forms. CG or CAD-based plant modelling technique would be recommended not only as a presentation tool but for planting design, landscape simulation and assessment.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.1 no.1
• /
• pp.13-19
• /
• 2007

In this study, diagnostic algorithm was suggested to diagnose quantitatively the degree of the stress urinary incontinence. The bio-signal measurement system was developed to measure the contraction pressure of the pelvic floor muscle and diagnostic parameters were drawn out by analyzing the contraction pressure data. Statistical evaluations were done to classify the diagnositc parameters by order that relationship is high. The diagnostic algorithm that was able to diagnose degree of the urinary incontinence as quantitatively was realized from the high relationship parameters.

• Journal of Sensor Science and Technology
• /
• v.19 no.6
• /
• pp.490-496
• /
• 2010

In this study, in order to overcome the weakness of acoustic field analysis which is generally used for ultrasonic probe performance evaluation, automatic acoustic field measurement system and evaluation parameters were proposed. The comparisons between acoustic field simulation and measured acoustic distribution data of normal and abnormal channels were conducted to evaluate the availability of proposed system and evaluation parameters. First, the impulse response characteristic of sample probe was investigated to classify the normal elements and abnormal elements. And then, normal channels and abnormal channels with abnormal element were chosen. The suggested 12 evaluation parameters were calculated using the acoustic fields of these channels. The availability of proposed automatic acoustic field measurement system and evaluation parameters was confirmed. And the performance evaluation of ultrasonic probe using acoustic field analysis could be easier and faster.

• Journal of Korean Physical Therapy Science
• /
• v.31 no.1
• /
• pp.70-87
• /
• 2024

Background: This study aimed to investigate the effect of Y-balance exercise on spatio-temporal gait parameters in subjects with chronic ankle instability. Design: Randomized Controlled Trial. Method: A study was conducted on 43 people with chronic ankle instability. Subjects performed modified Y-balance exercise 3 times a week for 50 minutes, 4 weeks. Gait parameters were measured using a gait analysis treadmill before exercise, 2 weeks after exercise, and 4 weeks after exercise. A gait analysis treadmill (FDM-T AP1171, Zebris, Germany) was used to measure gait parameters. Mean values were compared using Repeated measured two-way ANOVA. Result:: When comparing the results of three measurements taken before exercise, 2 weeks after exercise, and 4 weeks after exercise, there were significant differences in the qualitative and quantitative aspects of gait in gait variables such as step distance, step time, step ratio, and sway ratio. Conclusions: These results suggest that the Y-balance exercise and various exercises combining balance and proprioception are effective for subjects with chronic ankle instability.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.8
• /
• pp.93-98
• /
• 2021

The complex effects of the machining parameters make it is difficult to control and predict surface roughness. The theoretical surface roughness observed during mechanical machining with a round tool is determined by the tool radius and pitch. However, it was revealed that other parameters, such as the depth of cut and cutting speed, also affect surface roughness. This study adapted the Taguchi method, which can analyze the effects of cutting parameters quantitatively with an efficient number of experiments, to optimize the parameters for better surface roughness. Experiments were designed based on an orthogonal array, and the quantitative effects on the surface roughness were analyzed using the S/N ratio. The surface roughness was affected by all parameters, especially the tool radius. The optimum cutting parameter values obtained in this study showed better surface roughness than the other combinations of the parameters.

• The Korean Journal of Applied Statistics
• /
• v.31 no.1
• /
• pp.123-137
• /
• 2018

A nonlinear mixed effects model is mainly used to analyze repeated measurement data in various fields. A nonlinear mixed effects model consists of two stages: the first-stage individual-level model considers intra-individual variation and the second-stage population model considers inter-individual variation. The individual-level model, which is the first stage of the nonlinear mixed effects model, estimates the parameters of the nonlinear regression model. It is the same as the general nonlinear regression model, and usually estimates parameters using the least squares estimation method. However, the least squares estimation method may have a problem that the estimated value of the parameters and standard errors become extremely large if the assumed nonlinear function is not explicitly revealed by the data. In this paper, a new estimation method is proposed to solve this problem by introducing the ridge regression method recently proposed in the nonlinear regression model into the first-stage individual-level model of the nonlinear mixed effects model. The performance of the proposed estimator is compared with the performance with the standard estimator through a simulation study. The proposed methodology is also illustrated using quantitative high throughput screening data obtained from the US National Toxicology Program.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.28 no.2
• /
• pp.89-95
• /
• 2017

Background and Objectives : High-speed videolaryngoscopy (HSV) is the only technique that captures the true intra-cycle vibratory behavior of the vocal folds by capturing full images of the vocal folds. However, it has problems of no immediate feedback during examination, considerable waiting time for digital kymography (DKG), recording duration limited to a few seconds, and extreme demands for storage space. Herein, we demonstrate a new post-processing method that converts HSV images to two-dimensional digital kymography (2D-DKG) images, which adopts the algorithm of 2D videokymography (2D VKG). Materials and Methods : HSV system was used to capture images of vocal folds. HSV images were post-processed in Kay image-process software (KIPS), and conventional DKG images were retrieved. Custom-made post-processing system was used to convert HSV images to 2D-DKG images. The quantitative parameters of the post-processed 2D-DKG images was validated by comparing these parameters with those of the DKG images. Results : Serial HSV images for all phases of vocal fold vibratory movement are included. The images were converted by the scanning method using U-medical image-process software. Similar to conventional DKG, post-processed 2D DKG image from the HSV image can provide quantitative information on vocal fold mucosa vibration, including the various vibratory phases. Differences in amplitude symmetry index, phase symmetry index, open quotient, and close quotient between 2D-DKG and DKG were analyzed. There were no statistical differences between the quantitative parameters of vocal fold vibratory movement in 2D-DKG and DKG. Conclusion : The post-processing method of converting HSV images to 2D DKG images could provide clinical information and storage economy.