• Journal of Korean Society of Transportation
• /
• v.12 no.4
• /
• pp.5-19
• /
• 1994

The new concept of level of service for the airport system indicates that there must be strong stimulation to proceed with the current stereotyped service standards which are being criticised due to their being based on, either physical capacity/volume or temporal/spatial standards that directly incorporates the perception of passengers. Quantitative factors have been dealt with the main service measurements when evaluating level of service. However, the passenger's perception for the provision service at the airport system is definitely important consideration to assess level of service. To enhance the reliability of service level evaluation from the passenger's point of view, this study has adopted three main evaluation factors ; temporal/spatial factors as quantitative measurements and comfort and reasonable service factors as qualitative measurements. The multi-decision model was constructed using Fuzzy Set Theory and applied to a case study at Seoul Kimpo International Airport. Results are presented in terms of passenger satisfaction with a variety of different values.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.3
• /
• pp.157-164
• /
• 2003

The pulse-echo method is one of the most widely used ultrasonic techniques for application of nondestructive evaluation. Particularly, quantitative nondestructive evaluation of defects has been considered more important to assure the reliability and the safety of structure. Frequency energy in adhesive joints is based on the ultrasonic wave analysis. The attenuation coefficient upon wave amplitude and the frequency energy that is expressed in the term of wave pressure amplitude were utilized for the primary wave experiment. By means of a control experiment, it was confirmed that the variation of the frequency energy in adhesive joints depends on transition by stress variation. In this paper, the ultrasonic characteristics were measured for single lap joint and Double Cantilever Beam specimen with different fracture modes that was subjected to stress. Consequently, the data that was obtained from the adhesive specimen was analytically compared to the fracture mechanics parameter

• Proceedings of the Korean Reliability Society Conference
• /
• 2011.06a
• /
• pp.271-279
• /
• 2011

Automotive safety integrity level of hardware components can be achieved by satisfying quantitative and qualitative requirements. Based on ASIL, quantitative requirements are composed of hardware architectural metrics and evaluation of safety goal violations due to random hardware failures in ISO 26262. In this paper, the types of hardware failures will be defined and classified. Based on various metrics related with hardware failures, design essentials to achieve hardware safety integrity will be studied specifically. Issues associated with hardware development and assessment process are presented briefly.

• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.820-830
• /
• 2016

Pipe wall thinning by flow-accelerated corrosion and various types of erosion is a significant and costly damage phenomenon in secondary piping systems of nuclear power plants (NPPs). Most NPPs have management programs to ensure pipe integrity due to wall thinning that includes periodic measurements for pipe wall thicknesses using nondestructive evaluation techniques. Numerous measurements using ultrasonic tests (UTs; one of the nondestructive evaluation technologies) have been performed during scheduled outages in NPPs. Using the thickness measurement data, wall thinning rates of each component are determined conservatively according to several evaluation methods developed by the United States Electric Power Research Institute. However, little is known about the conservativeness or reliability of the evaluation methods because of a lack of understanding of the measurement error. In this study, quantitative models for UT thickness measurement deviations of nuclear pipes and fittings were developed as the first step for establishing an optimized thinning evaluation procedure considering measurement error. In order to understand the characteristics of UT thickness measurement errors of nuclear pipes and fittings, round robin test results, which were obtained by previous researchers under laboratory conditions, were analyzed. Then, based on a large dataset of actual plant data from four NPPs, a quantitative model for UT thickness measurement deviation is proposed for plant conditions.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.9
• /
• pp.275-284
• /
• 2016

The software used in the nuclear safety field has been ensured through the development, validation, safety analysis, and quality assurance activities throughout the entire process life cycle from the planning phase to the installation phase. However, this evaluation through the development and validation process needs a lot of time and money, and there are limitations to ensure that the quality is improved enough. Therefore, the effort to calculate the reliability of the software continues for a quantitative evaluation instead of a qualitative evaluation. In this paper, we propose a reliability evaluation method for the software to be used for a specific operation of the digital controller in a nuclear power plant. After injecting weighted faults in the internal space of a developed controller and calculating the ability to detect the injected faults using diagnostic software, we can evaluate the software reliability of a digital controller in a nuclear power plant.

• Journal of Convergence for Information Technology
• /
• v.12 no.5
• /
• pp.15-20
• /
• 2022

This research studied the evaluation of reliability among the software quality characteristics: suitability, reliability, usability, portability, maintainability, performance efficiency, security, and compatibility. It proposes a quantitative evaluation of reliability in the measurement of software quality. This study introduces a method for measuring the failure rate included in maturity during reliability evaluation, which is one of the characteristics of software quality, and is a study with experimental data on how the failure rate changes depending on the form of failure data. Focusing on software testing, the failure rate was measured and compared according to the type of failure data by applying it to the software reliability growth model, focusing on the number of failures per day. The failure rate was measured around the failure time found through the 6-day test, and the failure rate was compared with the failure rate proposed by the international standard ISO/IEC 25023 using the measurement results, and the application was reviewed according to the data type.

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.3
• /
• pp.19-22
• /
• 2008

The power systems should be improved to reduce the number of black-out events occurring throughout the world. Quantitative evaluation of composite power system reliability is very important in a competitive electricity environment. The reason is that the successful operation of electric power systems under a deregulated electricity market depends on transmission system reliability management. This paper presents sensitivity analysis of probabilistic reliability indices of Korea power systems with checking application of HTS-FCL.

• Journal of Distribution Science
• /
• v.17 no.5
• /
• pp.61-72
• /
• 2019

Purpose - In this study, we try to measure the efficiency of the traditional market and university cooperation projects and present the direction of policy improvement for the near future by converging the system, which exerts to secure the competitiveness and revitalize its centered-city, and the recent policies that have new business and social Research Design, Data, and Methodology - In order to improve this situation, this study uses Data Envelopment Analysis (DEA) to evaluate the effectiveness of the policy project and propose its evaluation results. Also, we want to derive the weight calculation for utilizing DEA by using AHP method. Results - This study's results were derived from the input and output variables, so instead of qualitative analysis, the conclusion was drawn out from the quantitative analysis. Through this quantitative analysis method, we had an opportunity to identify the characteristics of each site by each year. Conclusions - It is believed that the reliability of the results can be further improved if the qualitative part can be supplemented its unique characteristics of the model which only considers the simple quantitative aspect. Further studies should be undertaken as these sectors are expected to draw out fruitful research conclusion when these aspects were supplemented additionally, so continuous additional study is essential.

• Journal of Climate Change Research
• /
• v.2 no.3
• /
• pp.203-219
• /
• 2011

Greenhouse gas(GHG) inventories were reported recently in various fields. It, however, has been rarely to mention about the accuracy and reliability of the GHG inventory results. Some reliable assessment methods were introduced to judge the accuracy of the GHG inventory results. It is, hence, critical to develop an evaluation methodology. This project was designed 1) to develop evaluation methodology for reliability of inventory results by GHG-CAPSS, 2) to check the feasibility of the developed evaluation methodology as a result of applying this methodology to two emission sources: liquid fossil fuel and landfill, and 3) to construct the technical roadmap for future role of GHG-CAPSS. Qualitative and quantitative assessment methodologies were developed to check the reliability and accuracy of the inventory results. Qualitative assessment methodology was designed to evaluate the accuracy and reliability of estimation methods of GHG emissions from emission and sink sources, activity data, emission factor, and quality management schemes of inventory results. On the other hand, quantitative assessment methodology was based on the uncertainty assessment of emission results. According to the results of applying the above evaluation methodologies to two emission sources, those seem to be working properly. However, it is necessary to develop source-specific rating systems because emission and sink sources exhibit source-specific characteristics of GHG emissions and sinks.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.7
• /
• pp.500-504
• /
• 2009

A reliability of software is a type of nonfunctional requirement. Traditionally, a validation of the reliability is processed at the integration phase in software development life cycle. However, it increases the cost and the risk for the development. In this paper, we propose reliability analysis method based on mathematical analytic model at the architecture design phase of the development process as follows. First, we propose the software modeling methodology for reliability analysis using Hierarchical combined Queueing Petri Nets(HQPN). Second, we derive the Markov Reward Model from the HQPN based model. We apply our approach to the video conference system to verify the usefulness of our approach. Our approach supports quantitative evaluation of the reliability.