• The Journal of the Korea Contents Association
• /
• v.18 no.11
• /
• pp.430-446
• /
• 2018

In this paper, we conducted a comparative study on the methodology for impact analysis as the economic grounds for formulating policy and investment plan concerned with utilizing spectrum resource. In order to provide numerical results for objective comparison and selection among policy and investment planning, methods to be analyzed are focused on quantitative methodology based on mathematical models, consequently the utility and limits of econometric model, input-output analysis, computable general equilibrium and system dynamics are compared from various viewpoints including analysis cost. Besides, we compared the methodologies in the standpoint of utilizing spectrum and discussed the recent findings of mixed models combining multiple methodologies to exploit the advantages of each methodology and to offset the limit. Results of the research can be used as reference indicators to select the method that conforms to the purpose and priority of analysis verifying the efficiency of execution of policies and investment plans.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.70-86
• /
• 2022

An autonomous demand-responsive bus with mobility-on-demand service is an innovative transport compensating for the disadvantages of an autonomous bus and a demand-responsive bus with mobility-on-demand service. However, less attention has been paid to the quantitative impact assessment of the autonomous demand-responsive bus due to the technological complexity of the autonomous demand-responsive bus. This study simulates autonomous demand-responsive bus trips by reinforcement learning on a microscopic traffic simulation to quantify the impact of the autonomous demand-responsive bus. The Chungju campus of the Korea National University of Transportation is selected as a testbed. Simulation results show that the introduction of the autonomous demand-responsive bus can reduce the wait time of passengers, average control delay, and increase the traffic speed compared to the results with fixed route bus service. This study contributes to the quantitative evaluation of the autonomous demand-responsive bus.

• Journal of the Korean Institute of Gas
• /
• v.28 no.1
• /
• pp.85-99
• /
• 2024

As the proliferation of hydrogen electric vehicles accelerates, there is observed diversification in hydrogen refueling station models. This diversification raises safety concerns for different types of stations. This study conducted a quantitative risk assessment of a multi-vehicle hydrogen station, capable of simultaneously refueling cars, buses, and trucks. Utilizing Gexcon's Effects&Riskcurves Software, scenarios of fire and explosion due to hydrogen leaks were assessed. The study calculated the impact distances from radiative heat and explosion overpressure, and measured risks to nearby buildings and populations. The largest impact distance was from fires and explosions at dispensers and high-pressure storage units. High-pressure storage contributes most significantly to personal and societal risk. The study suggests that conservative safety distances and proper protective measures for these facilities can minimize human and material damage in the event of a hydrogen leak.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.3
• /
• pp.529-539
• /
• 1998

A quantitative study of impact damage of ${Al_2}}O_3}-TiO_2$ plasma coated soda-lime glasses was carried out and compared with that of the uncoated smooth glass specimen. The shape of cracks by the impact of steel ball was observed by stereo-microscope and the decrease of the bending strength due to the impact of steel ball was measured through the 4-point bending test. At the low velocity, cone cracks were occurred. As the impact velocity increases, initial lateral cracks were propagated on the slanting surface of a cone crack, and radial cracks were generated at the crushed site. When the impact velocity of steel ball exceeds the critical velocity, the contact site of specimen was crushed due to plastic deformation and then radial and lateral cracks were largely grown. Crack length of coated specimens was smaller than that of uncoated smooth specimen due to the effect of coating layer on the substrate surface. According to impact velocity, the bending strength of coated specimens had no significant difference, compared with that of the uncoated smooth specimen. But this represents that the bending strength of coated specimens was increased, considering the effect of sand blasting damage which was performed to increase the adhesion force of coating layer.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.6
• /
• pp.123-130
• /
• 2009

Fragmentation due to land developments causes disturbances and changes of composition in forest vegetation. The purpose of the study was to develop the impact assessment model for quantitative distance or degree of disturbance by land developments. This study conducted a survey about structure and composition of forest vegetation to determine degree of impact from land developments. The results of field survey, there was a difference in structure and composition of forest vegetation such as tree canopy, herbaceous cover, and number of vine and alien species the distances from edge to interior area such as 0m, 10m, 20m, 40m, and over 60m. To assess the disturbance of forest vegetation, the factors selected were the rate of vine's cover and appearance of alien species. The impact assessment model about vine species explained by a distance, forest patch size, type of forest fragmentation, and type of vegetation ($R^2$=0.44, p<0.001). The other model about alien species explained by a distance, type of forest fragmentation, type of vegetation, and width of road (85.9%, p<0.005). The models applied to Samsong housing development in Goyang-si, Gyunggi-do. The vines and alien species in the study area have had a substantial impact on forest vegetation from edge to 20 or 40m. The impact assessment models were high reliability for estimating impacts to land developments. The impact of forest vegetation by development activities could be minimized thorough the adoption of the models introduced at the stage of EIA.

• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.520-524
• /
• 2005

It is consequential to reduce the environmental impact of a product for sustainable development in 21st Century. In the field of transportation, especially, the technological market concerned about reduction and assessment of greenhouse gas emission is expected to be extended. The LCA gas been esteemed and utilized as a realistic alternative greenhouse gas emission is expected to be extended. The LCA has been esteemed and utilized as a realistic alternative to improve the environment by the assessment of environmental impacts. In this study, simplified life cycle assessment(S-LCA), was performed to analyze the environmental impacts quantitatively, which were produced through the life cycle of a electric motor unit(EMU). The object of the present work is rth investigate main parameters of environmental impacts and to establish the plans to improve the environment impact of EMU. As a result of quantitative assessment for environmental impact and manufacturing, the EMU carbody made of SUS showed acidification(AD) and marine water aquatic ecotoxicity(MAET) the most, while that made of Mild showed high impact of global warning(GW) and abiotic resources depletion(ARD). For the SUS EMU, the high AD and MAET impact is occurred by the discharged pollutants during acid-washing process. Also, high value of GW and ARD for Mild EMU is resulted from the consumption of iron ore, coal and crude oil during manufacturing. Therefore, the environment impact of carbody would be decreased by enhancing of energy efficiency and the lightening the weight of it.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.5
• /
• pp.147-157
• /
• 2022

The purpose of this study is to establish policy recommendations for the promotion of AI service impact assessment based on the definition of impact assessment and analysis of domestic and foreign AI service impact assessment cases. The direction of implementation was analyzed based on the case of impact evaluation promoted in various fields at home and abroad and the case of impact evaluation at home and abroad of artificial intelligence services. As a step-by-step implementation plan, in the first stage, quantitative indicators such as AI level survey-based economic effects are developed, and in the second stage, information culture such as safety and reliability and artificial intelligence ethics described in the Framework Act on Intelligence Information, social, economic, information protection, and people's daily lives are prepared. In the third stage, discussion on detailed metrics and methods will be expanded and impact assessment results will be evaluated. This study requires analysis through various participants such as policy designers, artificial intelligence service developers, and civic groups in the future.

• Journal of Environmental Impact Assessment
• /
• v.4 no.3
• /
• pp.1-8
• /
• 1995

In generally speaking, the purpose of Environmental Impact Assessment(EIA) is to give the environment its due place in the decision-making process by clearly ealuating the environmental consequence of a proposed activity before action is taken. The introduction of conventional EIA is to be seen as an end product of a very long evolutionary process, starting with rudimentary but evolving pollution control measures for air, water, noise, land and chemicals, each governed by separate, and separately administered pieces of legislation. In EIA process, the measures of status, scoping, proposed mitigation and communication have not been very quantitative in their significancy. Of course, the determinations have uncertainity in the implications for significant impacts. To improve the determination of significant impacts, some more comprehensive methodologies of EIA has been proposed with the concepts of risk analysis in the proposed projects. The concepts of risk analysis has been introduced to the expression of human health impairment due to environmental pollutants since the early 1980's. The risk analysis being meant by the statistical significance of impact has a process quantitatively considering uncertainities and importances of ecological systems and human health as well. The process of risk analysis shows assessment, doseresponse in toxicity, exposure assessment and risk characterization. With the risk assessment, it could be suggested for the proper measurements against their anticipated risk in the EIA. This paper deals the priciples developing process and application of the risk-based analysis in EIA.

• Journal of Preventive Medicine and Public Health
• /
• v.43 no.1
• /
• pp.26-34
• /
• 2010

Objectives: The purpose of this research is to analyze the impact of shared-decision making on patient satisfaction. The study is significant since it focuses on developing appropriate methodologies and analyzing data to identify patient preferences, with the goals of optimizing treatment selection, and substantiating the relationship between such preferences and their impact on outcomes. Methods: A thorough literature review that developed the framework illustrating key dimensions of shared decision making was followed by a quantitative assessment and regression analysis of patient-perceived satisfaction, and the degree of shared-decision making. Results: A positive association was evident between shared-decision making and patient satisfaction. The impact of shared decision making on patient satisfaction was greater than other variable including gender, education, and number of visits. Conclusions: Patients who participate in care-related decisions and who are given an explanation of their health problems are more likely to be satisfied with their care. It would benefit health care organizations to train their medical professionals in this communication method, and to include it in their practice guidelines.

• The Journal of Industrial Distribution & Business
• /
• v.11 no.4
• /
• pp.7-18
• /
• 2020

Purpose: This research investigates the impact of technology adoption on organisation productivity. The framework has three independent variables viz. technological change, information technology (IT) infrastructure, and IT knowledge management and one dependent variable as organisational productivity. Research design, data and methodology: An explanatory research design with a quantitative research method was employed, and data was collected using a self-administered questionnaire using online as well as an offline survey. The sample consisted of 300 IT managers and senior-level executives (production as well as service team) in leading IT companies in Malaysia selected using snowball sampling. Normality and reliability assessment was performed in the first stage utilising SPSS 22, and Confirmatory Factory Analysis (CFA) was performed with maximum likelihood estimation to assess the internal consistency, convergent validity, and discriminant validity. Finally, Structural Equation Model (SEM) and path analysis are conducted using AMOS 22. Results: The research findings demonstrated that technological change and IT infrastructure positively and significantly impact the organisation's productivity while IT knowledge management has significant but negative impact on organizational productivity of IT companies in Malaysia. Conclusion: The research concludes that all three factors plays important role in deciding organizational producvity. Recommendations, implications, limitations and future research avenues are discussed.