• Culinary science and hospitality research
• /
• v.11 no.3 s.26
• /
• pp.1-17
• /
• 2005

The purpose of this paper was to analyze the distribution ratio of citation in researches in food service and found the relationship of study. The result was as follows. First there were remarkably quantitative researches than qualitative researches. Second, the citation ratio of social studies was high according to frequency-analysis. Third, citation frequency of publication was the highest in the pre-study that included scientific papers, newspapers, art and science contest announcement data and so on. Fourth, there was much citation ratio of domestic literature than foreign literature.

• The Korean Journal of Malacology
• /
• v.27 no.1
• /
• pp.43-53
• /
• 2011

The gametogenic cycle and the spawning season in female and male Cyclina sinensis were investigated by quantitative statistical analysis using an image analyzer system, and the biological minimum size (the size at 50% of sexual maturity) was calculated by combination of quantitative data by size and von Bertalanffy's equation. Compared the gametogenic cycle by quantitative statistical analysis with the previous qualitative results in female and male C. sinensis, monthly changes in female and male gametogenic cycles calculated by quantitative statistical analysis showed similar patterns to the gonadal stages in female and male reproductive cycles by qualitative histological analysis. Comparisons of monthly changes in the portions (%) of each area to eight kinds of areas by quantitative statistical analysis in the gonads in female and male C. sinensis are as follows. Monthly changes in the portions (%) of the ovary areas to total tissue areas in females and also monthly changes in the portions of the testis areas to total tissue areas in males increased in March and reached the maximum in May, and then showed a rapid decrease from June to October. Monthly changes in the portions (%) of oocyte areas to ovarian tissue areas in females and also monthly changes in the portions of the areas of the spermatogenic stages to testis areas in males began to increase in March and reached the maximum in June in females and males, and then rapidly dropped from July to October in females and males when spawnig occurred. From these data, it is apparent that the number of spawning seasons in female and male C. sinensis occurred once per year, from July to October. Monthly changes in the number of the oocytes per mm2 and in the mean diameter of the oocyte in captured image which were calculated for each female slide showed a maximum in May and reached the minimum from December to February. Therefore, C. sinensis in both sexes showed a unimodal gametogenic cycle during the year. The percentage of sexual maturity of female and male clams ranging from 25.1 to 30.0 mm in length was over 50% and 100% for clams over 40.1 mm length. In this study, the biological minimum size (sexually mature shell lengths at 50% of sexual maturity) in females and males were 26.85 and 26.28 mm, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2002.05a
• /
• pp.43-50
• /
• 2002

Accurate quantitative forecasting of rainfall for basins with a short response time is essential to predict streamflow and flash floods. Previously, neural networks were used to develop a Quantitative Precipitation Forecasting (QPF) model that highly improved forecasting skill at specific locations in Pennsylvania, using both Numerical Weather Prediction (NWP) output and rainfall and radiosonde data. The objective of this study was to improve an existing artificial neural network model and incorporate the evolving structure and frequency of intense weather systems in the mid-Atlantic region of the United States for improved flood forecasting. Besides using radiosonde and rainfall data, the model also used the satellite-derived characteristics of storm systems such as tropical cyclones, mesoscale convective complex systems and convective cloud clusters as input. The convective classification and tracking system (CCATS) was used to identify and quantify storm properties such as life time, area, eccentricity, and track. As in standard expert prediction systems, the fundamental structure of the neural network model was learned from the hydroclimatology of the relationships between weather system, rainfall production and streamflow response in the study area. The new Quantitative Flood Forecasting (QFF) model was applied to predict streamflow peaks with lead-times of 18 and 24 hours over a five year period in 4 watersheds on the leeward side of the Appalachian mountains in the mid-Atlantic region. Threat scores consistently above .6 and close to 0.8 ∼ 0.9 were obtained fur 18 hour lead-time forecasts, and skill scores of at least 4％ and up to 6％ were attained for the 24 hour lead-time forecasts. This work demonstrates that multisensor data cast into an expert information system such as neural networks, if built upon scientific understanding of regional hydrometeorology, can lead to significant gains in the forecast skill of extreme rainfall and associated floods. In particular, this study validates our hypothesis that accurate and extended flood forecast lead-times can be attained by taking into consideration the synoptic evolution of atmospheric conditions extracted from the analysis of large-area remotely sensed imagery While physically-based numerical weather prediction and river routing models cannot accurately depict complex natural non-linear processes, and thus have difficulty in simulating extreme events such as heavy rainfall and floods, data-driven approaches should be viewed as a strong alternative in operational hydrology. This is especially more pertinent at a time when the diversity of sensors in satellites and ground-based operational weather monitoring systems provide large volumes of data on a real-time basis.

• Database Research
• /
• v.34 no.3
• /
• pp.159-169
• /
• 2018

Discretization of continuous variables intended to improve the performance of various algorithms such as data mining by transforming quantitative variables into qualitative variables. If we use appropriate discretization techniques for data, we can expect not only better performance of classification algorithms, but also accurate and concise interpretation of results and speed improvements. Various discretization techniques have been studied up to now, and however there is still demand of research on discretization studies. In this paper, we propose a new discretization technique to set the cut-point using Wasserstein distance with considering the distribution of continuous variable values with classes of data. We show the superiority of the proposed method through the performance comparison between the proposed method and the existing proven methods.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.194-204
• /
• 2020

Cultivar parameters, which are key inputs to a crop growth model, have been estimated using observation data in good quality. Observation data with high quality often require considerable labor and cost, which makes it challenging to gather a large quantity of data for calibration of cultivar parameters. Alternatively, data in sufficient quantity can be collected from the reports on the evaluation of cultivars by region although these data are of questionable quality. The objective of our study was to assess the quality of crop and management data available from the reports on the regional adaptation trials for rice cultivars. We also aimed to propose the measures for improvement of the data quality, which would aid reliable estimation of cultivar parameters. DatasetRanker, which is the tool designed for quantitative assessment of the data for parameter calibration, was used to evaluate the quality of the data available from the regional adaptation trials. It was found that these data for rice cultivars were classified into the Silver class, which could be used for validation or calibration of key cultivar parameters. However, those regional adaptation trial data would fall short of the quality for model improvement. Additional information on management, e.g., harvest and irrigation management, can increase the quantitative quality by 10% with the minimum effort and cost. The quality of the data can also be improved through measurements of initial conditions for crop growth simulations such as soil moisture and nutrients. In addition, crop model improvement can be facilitated using crop growth data in time series, which merits further studies on development of approaches for non-destructive methods to monitor the crop growth.

• Korean Journal of Remote Sensing
• /
• v.15 no.2
• /
• pp.91-105
• /
• 1999

Spatial data integration using multiple geo-based data sets has been regarded as one of the primary GIS application issues. As for this issue, several integration schemes have been developed as the perspectives of mathematical geology or geo-mathematics. However, research-based approaches for statistical/quantitative assessments between integrated layer and input layers are not fully considered yet. Related to this niche point, in this study, spatial data integration using multiple geoscientific data sets by known integration algorithms was primarily performed. For spatial integration by using raster-based GIS functionality, geological, geochemical, geophysical data sets, DEM-driven data sets and remotely sensed imagery data sets from the Ogdong area were utilized for geological thematic mapping related by mineral potential mapping. In addition, statistical/quantitative information extraction with respective to relationships among used data sets and/or between each data set and integrated layer was carried out, with the scope of multiple data fusion and schematic statistical assessment methodology. As for the spatial integration scheme, certainty factor (CF) estimation and principal component analysis (PCA) were applied. However, this study was not aimed at direct comparison of both methodologies; whereas, for the statistical/quantitative assessment between integrated layer and input layers, some statistical methodologies based on contingency table were focused. Especially, for the bias reduction, jackknife technique was also applied in PCA-based spatial integration. Through the statistic analyses with respect to the integration information in this case study, new information for relationships of integrated layer and input layers was extracted. In addition, influence effects of input data sets with respect to integrated layer were assessed. This kind of approach provides a decision-making information in the viewpoint of GIS and is also exploratory data analysis in conjunction with GIS and geoscientific application, especially handing spatial integration or data fusion with complex variable data sets.

• Archives of design research
• /
• v.16 no.3
• /
• pp.183-190
• /
• 2003

It is a fundamental pre-requisite to thoroughly analyse and understand the things which are being designed in the process of industrial design. However, it is not always easy to acquire appropriate data to meet all the requirements to finally design a functionally superior products. This paper proposes an industrial design model with heightened reliability using the orthogonal array tables, which are fairly handy to apply when there are many design criteria to be considered at the onset stage Especially, in this research, the basic purpose of the orthogonal arrays that they try to compact the range of experiments and to improve the effectiveness of the experiment results is answered under average industrial design processes. At the same time, non-quantitative data of design factors are quantitative by the concurrency in design and their mutual actions are examined. This method can help industrial designers in narrowing their design possiblities by depicting more valid data, thus producing quality product designs by deriving optimal control factors.

• Environmental Analysis Health and Toxicology
• /
• v.30 no.sup
• /
• pp.7.1-7.10
• /
• 2015

Objectives For successful adoption of legislation controlling registration and assessment of chemical substances, it is important to obtain sufficient toxicological experimental evidence and other related information. It is also essential to obtain a sufficient number of predicted risk and toxicity results. Particularly, methods used in predicting toxicities of chemical substances during acquisition of required data, ultimately become an economic method for future dealings with new substances. Although the need for such methods is gradually increasing, the-required information about reliability and applicability range has not been systematically provided. Methods There are various representative environmental and human toxicity models based on quantitative structure-activity relationships (QSAR). Here, we secured the 10 representative QSAR-based prediction models and its information that can make predictions about substances that are expected to be regulated. We used models that predict and confirm usability of the information expected to be collected and submitted according to the legislation. After collecting and evaluating each predictive model and relevant data, we prepared methods quantifying the scientific validity and reliability, which are essential conditions for using predictive models. Results We calculated predicted values for the models. Furthermore, we deduced and compared adequacies of the models using the Alternative non-testing method assessed for Registration, Evaluation, Authorization, and Restriction of Chemicals Substances scoring system, and deduced the applicability domains for each model. Additionally, we calculated and compared inclusion rates of substances expected to be regulated, to confirm the applicability. Conclusions We evaluated and compared the data, adequacy, and applicability of our selected QSAR-based toxicity prediction models, and included them in a database. Based on this data, we aimed to construct a system that can be used with predicted toxicity results. Furthermore, by presenting the suitability of individual predicted results, we aimed to provide a foundation that could be used in actual assessments and regulations.

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.15-21
• /
• 2020

Quantitative risk assessment (QRA) is used as a legal or voluntary safety management tool for the hazardous material industry and the utilization of the method is gradually increasing. Therefore, a leak frequency analysis based on reliable generic data is a critical element in the evolution of QRA and safety technologies. The aim of this paper is to derive the leak frequency function that can be applied more flexibly in QRA based on OGP report with high reliability and global utilization. For the purpose, we first reviewed the data on the 16 equipments included in the OGP report and selected the predictors. And then we found good equations to fit the OGP data using non-linear regression analysis. The various expectation functions were applied to search for suitable parameter to serve as a meaningful reference in the future. The results of this analysis show that the best fitting parameter is found in the form of DNV function and connection function in natural logarithm. In conclusion, the average percentage error between the fitted and the original value is very small as 3 %, so the derived prediction function can be applicable in the quantitative frequency analysis. This study is to contribute to expand the applicability of QRA and advance safety engineering as providing the generic equations for practical leak frequency analysis.

• Journal of Korea Water Resources Association
• /
• v.39 no.4 s.165
• /
• pp.335-346
• /
• 2006

Among various input data to hydrologic models, rainfall measurements arguably have the most critical influence on the performance of hydrologic model. Traditionally, hydrologic models have relied on point gauge measurements to provide the area-averaged rainfall information. However, rainfall estimates from gauges become inadequate due to their poor representation of areal rainfall, especially in situations with sparse gauge network. Alternatively, radar that covers much larger areas has become an attractive instrument for providing area- averaged precipitation information. Despite of the limitation of the QPE(Quantitative Precipitation Estimation) using radar, we can get the better information of spatial variability of rainfall fields. Also, rain-gauges give us the better quantitative information of rainfall field. Therefore, in this study, we developed improved methodologies tu estimate rainfall fields using an ordinary cokriging technique which optimally merges radar reflectivity data into rain-gauges data.