• Journal of Korean Society for Quality Management
• /
• v.27 no.3
• /
• pp.79-93
• /
• 1999

The common accelerated life test(ALT) consists of test methods applying a constant stress, higher than the use condition stress, to items. There we, however, situations for which a progressive stress ALT, in which the stress on a test item is continuously increased with time, Is more convenient to perform testing and simpler in analyzing data than a constant stress ALT. When a product under constant stress s follows a Weibull distribution with parameters $\theta$(5) and $\beta$, maximum likelihood(ML) estimators of parameters involved in the model are obtained and their asymptotic distributions are derived under stress bounded ramp tests in which the stress is increased linearly from use condition stress to the stress upper bound. The optimum test plans are also found which minimize the asymptotic variance of the ML estimator of the log mean life at design constant stress. For selected values of the design parameters, tables useful for finding optimal test plans are given. The effect of the pre-estimates of design parameters is studied.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.3
• /
• pp.56-65
• /
• 2001

In interpreting stream water quality data, scientific or statistical mehtods should be employed. Classical parametric statistical methods may not be adopted in analyzing water quality data, due to the violation of normality. In this study, nonparametric statistical methods, such as Kruskal-Wallis test and Mann-Whitney test, were used in comparing water quality data from several monitoring stations. Water quality data used are those collected Bokha watershed, located in Ichon-city, Kyonggi province. Based on the test results, domestic sewage is the major pollution source. A couple of sub-watersheds with a large number of livestock do not show significant differences in water quality parameters. It should be noted that comparison of mean values of water quality parameters is difficult to relate water quality with watershed characteristics. The results also indicate that livestock farming does not significantly affect the water quality.

• Journal of Korean Society on Water Environment
• /
• v.38 no.1
• /
• pp.1-9
• /
• 2022

The Yeongsan River, one of the four major rivers in Korea, shows the highest degree of water pollution compared to the other major rivers. The construction and opening of two weirs, Seungchon and Juksan, induced fluctuations in the hydrologic conditions and water quality of the river. To investigate the water quality changes caused by the opening of the weir in 2017, this study analyzed the water quality data using the non-parametric Wilcoxon signed-rank test and the three-dimensional spatiotemporal plots. The non-parametric statistical test results showed that the concentration of all parameters has increased after 2017 at a significance level of 0.05. For the parameters that showed the highest degree of change, chlorophyll-a and suspended solids, the median values have increased by more than 30% after weir opening. Visual analysis additionally showed the spatial changes in the Yeongsan River. Generally, the sites above the Seungchon weir showed higher pollution levels than those above the Juksan weir. In time series, visual analysis results also showed the trend of rising concentration for all water quality parameters, indicating that the opening of two weirs had a significant effect on the change in water quality of the Yeongsan River.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.628-630
• /
• 2003

Synthetic Aperture Radar(SAR) is an active microwave instrument that performs high-resolution observation under almost all weather condition. Research and algorithms have been proposed to process radar signal and to increase the quality of SAR products. In fact, many complicated steps are involved in order to generate a SAR image product. The purpose of this paper is to derive quality assessment procedures and define important test parameters in each procedure inside a SAR processor. Thus those test parameter values indicate the quality of SAR image products and verify the processor's performance. Moreover, required procedures to correct and handle errors which are indicated during the assessment are also presented.

• Journal of Korean Society of Water and Wastewater
• /
• v.11 no.3
• /
• pp.59-66
• /
• 1997

Although it produces well-treated water in water treatment plant, water quality at the tap can be changed depending on the state of pipes. It is because water quality deteriorates as plant water passes through pipeline networks. Therefore, the improvement of not only water treatment technology but also O & M of water pipelines is required to supply good water to consumers. The purpose of the study was to obtain the basic data of control technology for water quality in pipes through investigating water quality in distribution system. We selected 11 sampling sites and investigated water quality from plant to endpoint of distribution system. we also simulated decreasing tendency of free chlorine through pipeline network. As the result of water quality test, all parameters were below allowable levels, but some parameters had the possibility of being over levels. So there must be more work to set up proper countermeasure for violable parameters.

• Journal of Korean Society for Quality Management
• /
• v.26 no.3
• /
• pp.31-45
• /
• 1998

This paper proposes a method of designing one-sided cumulative scored control charts to control the process mean with a normally distributed quality characteristic. The average run length(ARL) is obtained from the average sample number of sequential probability ratio test(SPRT) on trinomial distribution. Using the analogy between cumulative scored control chart and SPRT for trinomial observations, a procedure is presented to determine three control chart parameters; lower and u, pp.r scoring boundaries and action limit. The parameters are determined by minimizing the ARL when the process is out of control with prespecified ARL when the process is in control.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.5 s.110
• /
• pp.485-494
• /
• 2006

The state-of-the-art of low-noise fan design usually includes the consideration of optimal sound level and sound quality. The influential design parameters of the noise level by the centrifugal fan were selected based on the preliminary test. The centrifugal fans were designed according to the experiment plan method by specifying the selected design parameters. The experiment with these machined mock-up's of centrifugal impellers suggested the major design parameters among many, having impacts upon the indices of sound quality (e.g. loudness, sharpness, roughness and fluctuation strength) at the same operation point. With the response surface method, the major design parameters selected thereafter were analyzed to estimate each contribution upon the sound quality of the centrifugal fan, and the optimal values were drawn by the consideration of the sound quality levels and their regression equations. In addition, the validity of the regression equations was numerically verified by means of the coefficient of determination. Furthermore, the mechanism by which the centrifugal fan impeller influences the determinants of its sound quality was suggested.

• Journal of Korean Society for Quality Management
• /
• v.50 no.4
• /
• pp.831-842
• /
• 2022

Purpose: This study carried out the Quality by Design (QbD)6σ process to verify the effectiveness and equivalence of the finished D-antigen quantitative test method, and compared the OFAT-based method validation and test result acceptance criteria with the Analytical Quality by Design (AQbD)-based method validation and test method. This is a study on how to reduce the risk of delay in permit change by increasing the reliability of permit data in the existing method by statistically analyzing the results. Methods: With the QbD6σ process, the effectiveness and equivalence of the D-antigen quantitative test method were verified with the data of the existing test method and the new test method. Results: Method validation tests are performed based on AQbD. Critical Method Parameters are identified through risk assessment, and single/combined actions are verified by designing and performing tests for Critical Method Parameters (analysis of variance, full factorial design method). Method validation can be effectively accomplished with the QbD6σ process. Conclusion: The use of QbD6σ can be used to achieve satisfactory results for both pharmaceutical companies and regulators by using appropriate statistical analytical methods for method validation as required by regulatory agencies.

• International Journal of Automotive Technology
• /
• v.7 no.1
• /
• pp.43-49
• /
• 2006

In this paper, an index for the evaluation of a vehicle intake booming noise and intake sound quality were developed through a correlation analysis and a multiple factor regression analysis of objective measurement and subjective evaluation data. At first, an intake orifice noise was measured at the wide-open throttle test condition. And then, an acoustic transfer function between intake orifice noise and interior noise at the steady state condition was estimated. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 intake noise and vibration expert evaluators. Next, the correlation analysis between the psychoacoustic parameters derived from the measured data and the subjective evaluation was performed. The most critical factor was determined and the corresponding index for intake booming noise and sound quality are obtained from the multiple factor regression method. And, the optimal design of intake system was studied using the booming noise and the sound quality evaluation index for expectation performance of intake system. Conclusively, the optimal designing parameters of intake system from noise level and sound quality whose point of view were extracted by adapting comparative weighting between the booming noise and sound quality evaluation index, which optimized the process. These work could be represented guideline to system engineers, designers and test engineers about optimization procedure of system performance by considering both of noise level and sound quality.

• The Journal of Engineering Geology
• /
• v.1 no.1
• /
• pp.85-108
• /
• 1991

Marine seismic processing is characterized by a great amount of data, several professional processing steps, and various parameters to be decided in each step. In general, adequate processing sequence and optimum parameters are obtained through test processing with sample set of data representing the whole group. The sequence and parameters are then applied in processing the whole data. In this paper, optimum processing sequence and parameters for the data acquired in Korean continental shelf are examined through test processing with real data. Finally, a good-quality migration section is produced using those sequence and parameters decided on the basis of the test results.