• Korean Journal of Food Science and Technology
• /
• v.51 no.3
• /
• pp.200-206
• /
• 2019

A potentially functional yogurt co-fermented with Monascus-fermented soybean powder (MFSP) was prepared, and its quality and antioxidant properties were investigated. Skim milk powder with (SMP+MFSP, 1:1, w/w) or without MFSP (SMP; control) was fermented by probiotic cultures consisting of L. delbrueckii subsp. bulgaricus KCTC 3635 and S. thermophilus KCTC 5092. The functional yogurt fermented with MFSP contained significantly (p<0.05) higher levels of ${\gamma}-aminobutryric$ acid (GABA; $107.22{\pm}3.06{\mu}g/g$), isoflavone aglycone (daidzein+genistein; $201.21{\pm}6.29{\mu}g/g$), and ubiquinone ($39.05{\pm}0.08{\mu}g/g$) than the control yogurt. During fermentation at $36^{\circ}C$ for 48 h, the functional yogurt displayed higher titratable acidity, viable cell numbers, and radical scavenging activity and a lower pH than the control yogurt (p<0.05). These results indicate that MFSP has great potential for enriching the free isoflavones, GABA, and ubiquinone contents in yogurt.

• Journal of Dairy Science and Biotechnology
• /
• v.30 no.2
• /
• pp.93-109
• /
• 2012

This study was performed to investigate the effects of added whey protein concentrates (WPC) and whey powder (WP) on the quality and shelf life of Tofu, a traditional food in Korea. Combined whey powder and whey protein concentrates were obtained at drainage after the casein was separated by using rennet enzyme or acidification of milk. We manufactured whey Tofu and evaluated its nutritional quality by testing, the general composition for yield, moisture, pH, crude protein, crude fat, carbohydrate, rheology, sensory properties, and change during storage. 1. The general compositions of WPC and WP were as follows: (a) WPC: moisture, 5.9%; crude protein, 56.2%; crude fat, 0.1%; carbohydrate, 32.6%; ash, 5.2%; and pH 5.93 and (b) WP: moisture, 3.7%; crude protein, 13.2%; crude fat, 1.6%; carbohydrate, 74.4%; ash, 7.1%; and pH, 6.65. 2. The yield of Tofu was as follows: (a) in WPC, the content was $CaCl_2$:GDL=6:4 > $CaCl_2$:GDL=9:1 > $CaCl_2$:GDL=7:3 > $CaCl_2$:GDL=8:2 and (b) in WP, 2% addition was the highest (265%) at $13.3g/cm^2$, but with 4% addition WP was the lowest (184%) at $22.2g/cm^2$. 3. The moisture content of Tofu was as follows: (a) in WPC, the content was $CaCl_2$:GDL = 6:4 > $CaCl_2$:GDL=9:1 > $CaCl_2$:GDL=7:3 > $CaCl_2$:GDL=8:2 and (b) in WP, 2% addition was the highest at 79.82% ($13.3g/cm^2$), but 4% was the lowest at 75.18% ($22.2g/cm^2$). 4. The pH of Tofu was as follows: (a) in WPC, the value was WPC 6% > WPC 4% > WPC 2% > control and $CaCl_2$:GDL=6:4 > $CaCl_2$:GDL=8:2 > $CaCl_2$:GDL=9:1 > $CaCl_2$:GDL=7:3 and (b) in WP, WP 4% > WP 2% > control. 5. The ash content of Tofu was as follows: (a) in WPC, the content was $CaCl_2$:GDL=8:2 > $CaCl_2$:GDL=7:3 > $CaCl_2$:GDL=6:4 > $CaCl_2$:GDL=9:1 and (b) in WP, there was no difference between 2% and 4% addition. 6. The crude protein content of Tofu was as follows: (a) in WPC, the content was $CaCl_2$:GDL=8:2 > $CaCl_2$:GDL=7:3 > $CaCl_2$:GDL=9:1 > $CaCl_2$:GDL=6:4 and (b) in WP, there was no difference between 2% and 4% addition. 7. The crude fat content of Tofu was as follows: (a) in WPC, the content was $CaCl_2$:GDL=8:2 > $CaCl_2$:GDL=7:3 > $CaCl_2$:GDL=9:1 > $CaCl_2$:GDL=6:4 and (b) in WP, values decreased with increasing pressed weight. 8. The carbohydrate content of Tofu was as follows: (a) in WPC, the content was $CaCl_2$:GDL=8:2 > $CaCl_2$:GDL=7:3 > $CaCl_2$:GDL=6:4 > $CaCl_2$:GDL=9:1 and (b) in WP, values increased with increasing pressed weight. 9. The rheology test results of Tofu were as follows: (a) in WPC, hardness and brittleness was highest with $CaCl_2$:GDL=8:2 and 6% added WPC. Cohesiveness was highest with $CaCl_2$:GDL=6:4 and 2% added WPC. Elasticity was the highest with $CaCl_2$:GDL=7:3 and the added WPC control. (b) in WP, hardness was the highest with $22.2g/cm^2$ and added WP control. Cohesiveness was the highest with $17.8g/cm^2$ and added WP 2%. Elasticity was the highest with $17.8g/cm^2$ and added WP 4%. Brittleness was the highest with $17.8g/cm^2$ and added WP control. 10. The sensory test results of Tofu were as follows: (a) in WPC, the texture, flavor, color, and smell were the highest with $CaCl_2$:GDL=6:4 and 6% added WPC. (b) in WP, the texture was the highest in the control with $22.2g/cm^2$. Flavor and smell were the highest in WP 2% and $22.2g/cm^2$. Color was the highest in WP 2% and $17.8g/cm^2$. 11. The quality change of Tofu during storage was as follows: (a) in WPC, after 60 h, all samples began to get spoiled and their color changed, and mold began to germinate. (b) in WP, the result was similar, but the rate of spoilage was more rapid than that in the control.

• Journal of the Korea Institute of Building Construction
• /
• v.4 no.2
• /
• pp.129-136
• /
• 2004

High fluidity concrete(HFC) requires high dosage of superplasticizer to acquire sufficient fluidity, and high contents of fine powder and viscosity enhancing admixtures to resist segregation. The use of high amount of admixtures to make HFC at batcher plant in ready mixed concrete company is one of the reasons to raise the manufacturing cost of HFC. For this reason, new type of manufacturing method of HFC are described using both flowing concrete method and segregation reducing superplasticizer(SRS) in order to gain economical profit and offer the convenience for quality control.. As dosage of melamine based superplasticizer increases, it shows that fluidity and bleeding increase, while air contents and ratio of segregation resistance decrease. It also shows that addition of viscosity agent into superplasticizer reduce bleeding and improve segregation resistance of concrete. Dosage of AE agent into superplasticizer containing viscosity agent recovers loss of air contents during flowing procedure. Combination of proper contents of superplasticizer, viscosity agent and AE agent make possible to develope segregation reducing type superplasticizer. Compressive strength of high fluidity concrete applying flowing method with it is higher than that of base concrete. No differences of compressive strength between compacting methods are found. For the estimation of construction cost of high fluidity concreting using segregation reducing type superplasicizer, under same strength levels, although material cost of high fluidity concrete is somewhat higher than that of plain concrete due to segregation reducing type superplasticizer cost, labor cost and equipment cost of high fluidity concrete is cheaper than that of plain concrete. However, based on the strength differences, high fluidity concrete shows lower material cost, labor cost and equipment cost than that of plain concrete due to decreasing in size of member and re-bar caused by high strength development of concrete.

• Carbon letters
• /
• v.26
• /
• pp.31-42
• /
• 2018

Adsorption is one of the best methods for wastewater purification. The fact that water quality is continuously decreasing requires the development of novel, effective and cost available adsorbents. Herein, a simple procedure for the preparation of a magnetic adsorbent from agricultural waste biomass and ferrofluid has been introduced. Specifically, ferrofluid mixed with wheat straw was directly pyrolyzed either by microwave irradiation (900 W, 30 min) or by conventional heating ($550^{\circ}C$, 90 min). Magnetic biochars were characterized by X-ray powder diffraction, $M{\ddot{o}}ssbauer$ spectroscopy, textural analysis and tested as adsorbents of As(V) oxyanion and cationic methylene blue, respectively. Results showed that microwave pyrolysis produced char with high adsorption capacity of As(V) ($Q_m=25.6mg\;g^{-1}$ at pH 4), whereas conventional pyrolysis was not so effective. In comparison to conventional pyrolysis, one-step microwave pyrolysis produced a material with expressive microporosity, having a nine times higher value of specific surface area as well as total pore volume. We assumed that sorption properties are also caused by several iron-bearing composites identified by $M{\ddot{o}}ssbauer$ spectroscopy ([super] paramagnetic $Fe_2O_3$, ${\alpha}-Fe$, non-stoichiometric $Fe_3C$, ${\gamma}-Fe_2O_3$, ${\gamma}-Fe$) transformed from nano-maghemite presented in the ferrofluid. Methylene blue was also more easily removed by magnetic biochar prepared by microwaves ($Q_m=144.9mg\;g^{-1}$ at pH 10.9) compared to using conventional techniques.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.4112-4112
• /
• 2001

The feasibility of NIR spectroscopy as a quick and nondestructive method for quality control of uniformity of coating thickness of pharmaceutical tablets was investigated. Near infrared spectra of a set of pharmaceutical tablets with varying coating thickness were measured with a diffuse reflectance fiber optic probe connected to a Broker IFS 28/N FT-NIR spectrometer. The challenging issues encountered in this study included: 1. The similarity of the formulation of the core and coating materials, 2. The lack of sufficient calibration samples and 3. The non-linear relationship between the NIR spectral intensity and coating: thickness. A peak at 7184 $cm^{-1}$ was identified that differed for the coating material and the core material when M spectra were collected at 2 $cm^{-1}$ resolution (0.4 nm at 7184 $cm^{-1}$). The study showed that the coating thickness can be analyzed by polynomial fitting of the peak area of the selected peak, while least squares calibration of the same data failed due to the lack of availability of sufficient calibration samples. Samples of coal powder and solid pieces of coal were analyzed by FT-NIR diffuse reflectance spectroscopy with the goal of predicting their ash content, percentage of volatile components, and energy content. The measurements were performed on a Broker Vector 22N spectrometer with a fiber optic probe. A partial least squares model was constructed for each of the parameters of interest for solid and powdered sample forms separately. Calibration models varied in size from 4 to 10 PLS ranks. Correlation coefficients for these models ranged from 86.6 to 95.0%, with root-mean-square errors of cross validation comparable to the corresponding reference measurement methods. The use of FT-NIR diffuse reflectance measurement techniques was found to be a significant improvement over existing measurement methodologies in terms of speed and ease of use, while maintaining the desired accuracy for all parameters and sample forms.(Figure Omitted).

• Korean journal of food and cookery science
• /
• v.20 no.6 s.84
• /
• pp.650-657
• /
• 2004

The objective of this study was to seek the best recipe for making Gamdanja. Gamdanja is a kind of rice cake made from persimmon extract and winy flour, with a little salt mixed into the waxy flour. The method involved boiling the persimmon extract and beating in the waxy rice powder until all the waxy flour had been added. The procedure was as follows: Gamdanja containing different ratios of ingredients, such as persimmon extract (23, 23.5 and 24 hrs) and waxy rice flour (160 and 180g). The most desirable recipe was determined after sensory examination and mechanical tests using texture, moisture content and colorimeter measurements. The results of the sensory evaluation showed that Gamdanja made using persimmon extracted for 23.5 hrs, with the additional of 160g of winy flour gave the higher scores for QDA profile, chewiness, delicacy and after swallowing preference than the other ratios. The results of the acceptance test also showed that the Gamdanja made using the persimmon extracted for 23.5 hrs with 160g of waxy rice flour was the best mix in every respect, such as for color and overall acceptability. In the textural analysis of Gamdanja, the hardness, adhesiveness, gumminess and chewiness were increased by the additiong of furtherway lour. The moisture content of Gamdnja with persimmon extracted for 23 hrs was higher an those extracted for 23.5 and 24 hrs. The L-, a- and values of Gamdanja were increased with decreasing waxy flour. The sensory and mechanical examinations showed the overall quality of Gamdanja had positive correlations with delicacy and color, but negative correlations with hardness, adhesiveness, gumminess, and chewiness. As a result of these tests, the most desirable recipe for the Gamdanja was persimmon extracted for 23.5 hrs with the additional of 160g of waxy rice flour, containing $1\%$ salt and a moisture content of $45.87\%$.

• Journal of Dairy Science and Biotechnology
• /
• v.24 no.2
• /
• pp.11-20
• /
• 2006

Korea dairy industry has a long and chronic problems to consume raw milk , those are surplus milk and decline the market milk consumption continued about 10 years. This study was aim to propose and to find the solution for dairy industry problems. After WTO system, with the importation of dairy products, domestic milk production has fell into the situation of excess supply and huge inventory of dried milk, the milk powder stocks have increased since 2002. That made a chronic decline milk consumption in Korea. The core of chronic problem of Korea dairy industry is the decreasing in market milk consumption. If they have a settlement of any other way using their raw milk to process and consumption to market milk, there will be a solution to solve the chronic problems in this situation. Especially, that will be a development of small farm scale natural cheese production and consume. This may be lead a situation of increase the raw milk consumption, because natural cheese making needs much of raw milk more than market milk. But there are very low technical level of farmers cheese making status, so they need a cheese making educational program for their commercial level of cheese products. Under these situation, there are needed a way out of educational system for the dairy farmers to obtain the high level of cheese making technology from the trustable and scientific organization. The natural cheese making technique of dairy farmers should be accumulated to get the consumers' solid recognition of high quality of natural cheese as LOHAS(Lifestyle Of Health And Sustainability) foods.

• Korean journal of food and cookery science
• /
• v.8 no.2
• /
• pp.83-93
• /
• 1992

This dissertation was aimed to study the stability of egg foams and the quality of rice yackwa added with egg foams. Because of the difference of protein composion between rice flour and wheat flour, yackwa made from rice powder turned out to be harder and less raised. Egg foams were added to the rice flour to help raise the dough to a great extent and make it softer when frying. The smaples were prepared differently: in the finess of rice flour (100, 140 mesh), the kinds of egg foams (whole egg, egg white), and the content of egg foams (40 g, 60 g), respectively. The stability of egg foams was determined by an Optical microscope, the hardness of rice yackwa was examined by Instron, the structure by Scanning Electron Microscope, the color by Hunter's Colorimeter, and the sensory evaluation was also made. The resluts are as knows: The most stable egg white foam and whole egg foam were the 2 and 3 min. whipped ones, respectively. In the case of rice yackwa, which was made from 140 mesh rice flour and 60 g of whole egg, the hardness and the structure were similar to those of wheat yackm. It was very tasty and most preferred. As a whole, the color of rice yackwa was lighter man mat of wheat yackwa.

• Nuclear Engineering and Technology
• /
• v.49 no.4
• /
• pp.734-743
• /
• 2017

In order to investigate the swelling behavior and fuel-cladding interaction mechanism of U-10Zr alloy metallic fuel at very low burnup, an irradiation experiment was concisely designed and conducted on the China Mianyang Research Reactor. Two types of irradiation samples were designed for studying free swelling without restraint and the fuel-cladding interaction mechanism. A new bonding material, namely, pure aluminum powder, was used to fill the gap between the fuel slug and sample shell for reducing thermal resistance and allowing the expansion of the fuel slug. In this paper, the concise irradiation rig design is introduced, and the neutronic and thermal-hydraulic analyses, which were carried out mainly using MCNP (Monte Carlo N-Particle) and FLUENT codes, are presented. Out-of-pile tests were conducted prior to irradiation to verify the manufacturing quality and hydraulic performance of the rig. Nondestructive postirradiation examinations using cold neutron radiography technology were conducted to check fuel cladding integrity and swelling behavior. The results of the preliminary examinations confirmed the safety and effectiveness of the design.

• Journal of the Korean Society of Food Culture
• /
• v.3 no.4
• /
• pp.385-390
• /
• 1988

This study was conducted to determine the interconversion of sugars in persimmon during the drying process and the textural properties of raw and dried persimmons using the changes of some chemical constituents, the analysis of sugar component, and the measurement of texture. Five varieties of persimmons were used in this experimment. As the drying proceeded, content of acetaldehyde and alcohol increased while soluble tannin content rapidly decreased. The rapid changes of these component obserbed in kyongsan Bansi and Hiratanenashi. Soluble sugars detected in raw persimmons were mainly glucose, fructose and sucrose. The content of sucrose was rapidly decreased in early stage of drying, while glucose and fructose were rapidly increased. The nearly same amount of glucose and fructose presented in the dried persimmon although there were some differences among varieties tested. The major component of white powder developed on the surface of dried persimmon was almost glucose. The texture profile analysis of the raw and dried persimmons was made with texturemeter and the quality of the dried persimmons was sensory evaluation method. Hiratanenashi and Sagoksi were determined as the suitable varieties in the processing of dried persimmons, but the varieties of Changdungyee and Namyang Susi were not suitable.