• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.352-363
• /
• 2021

The purpose of this study was to evaluate the load of nutrients contained in the drainage discharged from the facility horticultural complex and to use them for re-use of fluids and design for introduction of water treatment plants. Representative hydroponic cultivation crops were selected as tomato, paprika, cucumber, and strawberry, and the total number of samples analyzed for water quality was 80. As a result of the analysis, since various fertilizer components such as N, P, K⁺, Na⁺, Mg²⁺, Ca²⁺, Si₄⁺, HCO₃^-, Cl^-, S^2-, Fe, Mn, Cu, Zn, Mo and B are contained at very high concentrations in the drainage, the need for water treatment was confirmed. Through statistical analysis, it was analyzed that the drainage concentration of strawberries was lower than that of tomatoes, paprika, and cucumbers. In the case of tomatoes, these essential ion concentrations are the highest, so it was confirmed that they are subject to valuable resources in terms of reuse of fertilizers. The load of N and P of the drainage discharged from the facility horticultural complex 1m² was analyzed. For N, the daily processing capacity of 4.0 kg of tomatoes, 3.3 kg of paprika, 3.0 kg of cucumbers, and 1.5 kg of strawberries was calculated based on 1 ha. It was suggested that the P concentration needs a scale and capacity that can handle 0.5 kg of tomatoes, 0.6 kg of paprika, 0.4 kg of cucumber, and 0.2 kg of strawberries per day. Through this study, the amount of nitrogen and phosphorus contained in the drainage discharged from the greenhouse of each crop was evaluated to analyze the economy. In addition, it was expected to be used as basic data that can be used to calculate the treatment capacity to be reflected when introducing water treatment facilities in facility horticultural complexes for sustainable agriculture.

• Journal of Distribution Science
• /
• v.15 no.5
• /
• pp.75-83
• /
• 2017

Purpose - With the rise of the fourth industrial revolution, it has converged with the existing industrial revolution to give shape to increased accessibility of knowledge and information. As a result, it has become easier for scholars to actively persue and compile research in various fields. This current study aims to focus and assess the current standing of KODISA: the Journal of Distribution Science (JDS), International Journal of Industrial Distribution & Business(IJIDB), the East Asian Journal of Business Management (EAJBM), the Journal of Asian Finance, Economics and Business (JAFEB) in a rapidly evolving era. Novel strategies for creating the future vision of KODISA 2020 will also be examined. Research design, data, and methodology - The current research will analyze published journals of KODISA in order to offer a vision for the KODISA 2020 future. In part 1, this paper will observe the current address of the KODISA journal and its overview of past achievements. Next, part 2 will discuss the activities that will be needed for journals of KODISA, JDS, IJIDB, EAJBM, JAFEB to branch out internationally and significant journals will be statistically analyzed in part 3. The last part 4 will offer strategies for the continued growth of KODISA and visions for KODISA 2020. Results - Among the KODISA publications, IJIDB was second, JDS was 23rd (in economic publications of 54 journals), and EAJBM was 22nd (out of 79 publications in management field journals). This shows the high quality of the KODISA publication journals. According to 2016 publication analysis, JDS, IJIDB, etc. each had 157 publications, 15 publications, 16 publications, and 28 publications. In the case of JDS, it showed an increase of 14% compared to last year. Additionally, JAFEB showed a significant increase of 68%. This shows that compared to other journals, it had a higher rate of paper submission. IJIDB and EAJBM did not show any significant increases. In JDS, it showed many studies related to the distribution, management of distribution, and consumer behavior. In order to increase the status of the KODISA journal to a SCI status, many more international conferences will open to increase its international recognition levels. Second, the systematic functions of the journal will be developed further to increase its stability. Third, future graduate schools will open to foster future potential leaders in this field and build a platform for innovators and leaders. Conclusions - In KODISA, JDS was first published in 1999, and has been registered in SCOPUS February 2017. Other sister publications within the KODISA are preparing for SCOPUS registration as well. KODISA journals will prepare to be an innovative journal for 2020 and the future beyond.

• Journal of Science of Art and Design
• /
• v.7
• /
• pp.5-63
• /
• 2005

Generally, the meanings of destruction are related in the meaning of demolition, breakdown, into fragments ... and so on, and the similar meanings are twist, crush, demolish, split, cut, into pieces , break up ... etc. Further, it has related in the cruelty and destructive heart which are linked with orgy, Sadism, Necrophilia and so on. The meanings are also expressed by the initial , which are deprivation, deface, defame, deform, degrade, delegitimize, denounce , deride, destroy, devalue, as well as debase, debunk, declaim, declassify, decry, delete, denigrate, deprecate, despise or detract ...and so on. Dario Gamboni has discussed the meaning in his book as two categories Iconoclasm and Vandalism. And the similar meanings could be found in the words which has the initial of , like abase, abate, abhor, abjure, abolish, abridge, abuse ...and so on. Even though the distinct meanings of Iconoclasm and Vandalism, it is not easy to distinguish clearly between the differences when the results are accomplished in contemporary paintings because of the similarity of the results. In korean vocabulary there are no similar words to distinguish between the meanings of destruction and deconstruction, and the deconstruction is not recorded in the general dictionaries. However the meaning of is diminishing, separation, contrast and so on. So the unification of the word as do-construction is not construct, minus construction, reverse construction. And Vincent Ditch explained that there are the meaning of destroy the text. From Jacques Derrida, the deconstruction strategy is to criticise the world of traditional metaphysics and logocentrism, and not to reconstruire the philosophical meaning of texts but $d\'{e}construire$ them. And Saussure emphasized that the signifers could have more meaning that there can be more signified in traditional texts in the art. as a result, deconstruction is explained that there are many signified meanings in a signifer. In this thesis , from using the meanings of destruction and deconstruction, to distinguish the expressive skills in contemporary art works are arising. Therefore, special methods which are linked in the destruction styles are selected. As a result, the two different purposes of destruction is arising, one is enmity destruction and the other is self destruction another word, auto destruction or destruction to create The enmity destruction can be distinguished by the two category Iconoclasm and Vandalism. They come from the moment of different historical aspect is arising and want to attack the Icon or masterpiece this concept is from the study of John Philips and especially iconoclasm is linked with religious and artistic heart, but Vandalism is come from the political attack. Sometime, this distinguish is not clearly arising, because the two aspects are co-related in the attack. As a result, firstly, the Iconoclastic controversy had arisen in the methods of Dadaism which has developed by Man Ray, Francis Picabia and Marcel Duchamp. They want to attack the pre-established master-pieces and painting spaces, and they had 'non-artistic attitude' not to be art. Since 1980, the German artist Anselm Kiefer adapted the methods and made them his special skills so he had tried to paint tough brush strokes and draw with hugh pallette image line and fire and water images , they can be the image attack as the Iconoclasm. secondly, the model of vandalism is to be done by hammer, drill, canon and so on. the method is to attack the content of painting. Further, the object of destruction is bound by cords and iron lings to demolish or to declare the authority of pre-statues; it symbolize the pre-authority is gone already. Self-destruction based paintings are clearly different in the purpose of approaching the art work. First of all, they can be auto-destruction, creative destruction and metamorphosis destruction, which is linked with the skill the material aspect and basic stature, and sign destruction or signifier destruction, which is link with the inner meaning destruction that is considered as the Semiotical destruction in post-modern paintings. Since 1960, the auto destruction is based on the method of firing, melting, grinding and similar skills, which is linked with Neo-Dada and reverse-assemblage. Metamorphosis destruction is strongly linked with the basic inner heart price and quality, so it can be resulted in the changedness of expectation and recognition. Tony Cragg has developed the skills to metamorphose the wood as stone or iron as cloth and stone as sponge and rubber and so on. The researcher has developed the same style in the series of since 2003. The other self-destructive methods are found in the skill of sign destruction. In the methods the meaning of the art is not fixed as one or two, but is developed multi-meaning and differ from original starting situation, so Jacques Derrida called the difference meaning in deconstruction. It is the destruction of textes. These methods are accomplished by David Salle, Francesco Clemente, and recently Tracy Emin, who has developed the attacking heart in the spectators' emotion. Sometime in the method of self-destruction, it is based on horror and shock, the method is explored by Demian Hirst and Jakes and Dinos Chapman. Their destructive styles stimulate ambivalent heart and destroy original sign of girl and animals.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.4
• /
• pp.343-355
• /
• 2009

In order to restore the identity of sound environment and expand the sound culture of a region, the purpose of this study are to excavate the resources of soundscape and find out the plans for the preservation and promotion of soundscape resources peculiar to the region. For this purpose, this research is conducted through an interview survey of residents and an observation survey using listening walk in Hongdo, one of the southwesten island of Korea. The results of survey confirm that there are so many sounds to hear around Hongdo island, those are, natural sounds such as the song of the birds, the roar of the waves, the whistling sounds, the shriek of the seagulls, and the pebbles sounds washed away by the waves, and artificial sounds such as the steam-whistle signals, the ship's broadcasts, the voice of tourists, the sounds of church bells, lighthouse sirens etc. The results suggest that it is necessary to consider several ways for restoration of an unique soundscape in Hongdo island, those are, improvement for efficient management of a ship's broadcasts in public areas, removal of a ferry in Hongdo swimming beach, management of Dangsanje (a religious service), preservation of a lighthouse siren and a foghorn, restoration and improvement of underground stream, management and control of public fish market, restoration of brooklet, management of cooperative system for a fish market, restoration of PoongO-Gut (a ritual for a large harvest) and a skate festival, management of a Hongdo sports meeting, sound quality modification of a boat whistle, restoration of orientalia such as a funeral bier, ecosystem preservation activity of the shore and ocean, and promotion of amenity for fascination and vitality in a rural community. Also, a sound map is drawn up for many tourists so as to realize the importance of sound environment and identity of soundscape and to gain their experience at first hand in Hongdo island.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.211-220
• /
• 1999

The corn is mostly planted in mid-April in single-cropping silage system if possible, however, in a double-cropping silage system, the corn planting date is delayed until after the mid-May. The objective of this study was to evaluate agronomic characteristics and forage performance of the eight government recommended corn hybrids for silage at two dates of planting. Split-plot design replicated three times was used, that is, main plots were planting dates, sub-plots were eight hybrids at Suweon in 1997. Days from planting to silking of optimum planting was 84 days and that of late was 69 days. The difference in silking day among the hybrids was 6 days at optimum planting and 2 days at late planting. Plant height of optimum planting corn was higher than that of late one, however, ear height and stem diameter of optimum planting were lower than those of late planting corn. Among the corn hybrids tested, plant heights of 'P3156' and 'P3163' were higher than those of the other hybrids. Ear height of 'DK713' was the lowest among the corn hybrids and stem diameter of 'P3394' was thicker than that of the other hybrids. European corn borer(ECB) damage(16.6%) at optimum planting was lower than that(49.9%) of late, however, there were no significant ECB damage differences among the corn hybrids tested. Whole plant dry matter(DM) contents of 'P3525', 'P3394' and 'P3352' hybrids were higher than those of the other corn hybrids at harvest. Ear percentages of the total dry matter(DM) of 'P3394' and 'P3156' were higher than those of the other corn hybrids. Dry matter(DM) and total digestible nutrients(TDN) yields(19,696 and 14,621kg/ha) at optimum planting were higher than those (17,163 and 12,570kg/ha) of late planting, while there were no significant differences in DM and TDN yields among the corn hybrids tested. And those hybrids with greater proportion of grain in the whole plant have higher DM and TDN yields. Correlation coefficients for days from planting to silking with DM and TDN yields were $0.84^{**}$ and $0.87^{**}$, and those for ear percent were $0.86^{**}$ and $0.87^{**}$. Results of this study indicate that optimum planting date(15 April) is better than late planting date(16 May) in agronomic characteristics and forage production of silage corn. Days from planting to silking and ear percent as welI as other characters are important factors screening the corn hybrid for silage.

• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.64-64
• /
• 1979

Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well.2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air.3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying.4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis.5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time.6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture.7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation.8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise.11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss.12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method.13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated.Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year.14. Required fan horsepower and energy for the intermittent fan operation were3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation.15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use.16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

• Journal of Korean Society of Archives and Records Management
• /
• v.1 no.1
• /
• pp.37-52
• /
• 2001

1. establishment and development of China archives science: With the centuries-old history of archives and archives management, early China archives science came into being in 1930s, and the research pushed forward by archives enterprise has made great achievements since then. 1.1 Expanding research fields: Foundation

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.6
• /
• pp.126-133
• /
• 2009

This study aimed to propose the base data to promote the green belt(thereafter GB) regulations and management in Korea. The research took the methods of analysis of citizen's official petitions to the once, of interviews and questionnaire to the of officials of Seoul Metropolitan City who is under the job of managing the GB. The conclusions were as follows. The officials did understand function and necessity of GB well. They especially, put the importance of the purpose of GB on the prevention of the environment of the city and prevention of concentration of population, They recognized that they suffered from the overloaded job on the management of GB in quantity and quality. The seriousness of illegal action of the change of land use, piling-up of materials and productions on the forbidden land, using exclusively of warehouses for agriculture as for commerce and enlarging the area of warehouse with application of leased land for agriculture instead of the agricultural land in law were detected in the officials' cognition. The officials proposed some ideas to prevent above mentioned illegal actions including forcing a person who did illegal actions to punish money to restore environment etc..

• Journal of Biosystems Engineering
• /
• v.4 no.2
• /
• pp.65-83
• /
• 1979

Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well. 2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air. 3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying. 4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis. 5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time. 6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture. 7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation. 8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise. 11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss. 12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method. 13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated. Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year. 14. Required fan horsepower and energy for the intermittent fan operation were 3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation. 15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use. 16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

• Journal of the Korean Society of Costume
• /
• v.35
• /
• pp.45-66
• /
• 1997

This thesis is a study on the kaftan styles iin Asia. The purpose of he study was to examine the origin o the kaftan concentrating on the history and cultural backgrounds of nomads in he Western Central and North Eastern Asia. Secondly for more thorough study and expla-nation on how these kaftans contributed to East-West trade along the silk road. wall paintings and miniature illuminations along Oasis roads persia and Saracen period were compared, Also real kaftans were compared and analyzed the characteristics of Western (Turkey palestine) Central(Kazakistan Uz-bekistan Tadzhistan Qyrgyztan Turkmenistan) and the North Eastern Asian(Mongol) area. Thirdly an attempt has been made to provide the North Eastern Asian(Mongol) area. Thirdly an attempt has been made to provide the style classifications according to their peculiarities of the various kaftans as well as how kaftan gave important influences on custumes of different religious sects. The kaftan is a long coat-like garment with front openings fastened with long sash having an extra long sleeves which were worn by middle and high class nomadics throughout the West Central and North Eastern Asia This type of kaftans were a basic clothing for nomadics since they were constantly moving fromone to another areas on their horse back riding. They also wore tight trousers with boots. Kaftans seem to be originated from nomads of Steppe around B.C. 800 On B. C 400 west asian areas such as Solokha Kul-oba Kulogan had pictures sculptues on vases showing kaftans of half coat type length with front opening tied with band. Also the materials used were the products of animals such as wool or felt with animal designs showing Scythian nomads. In the North Eastern Asia Hsiung-Nu were active in Kazakha North Altai and Mongol The Clothing and fabrics exfavated near Noin-ula Pazyrik showed many samples of kaftan with trousers with other interment be-longings with a corpse around B.C 300 to A. D 100 when trades along the silk roads were proven by many historians Kaftans excavated in this area wore red front opening silk materials which suggesting settling down of nomads. in he central Asia Dol-gull near Altai mountain area were mainly miners who later had many trades with Persia and Bizantine. After Dol-gull Bezeklik temple Samarkant Kizil cow Budda sculture wall paintings of Astana tomb showed typical kaftan of this re-gion. These were both hip covered length as well as long coat with narrow sleeves. Es-pecially they had different color band fron the main kaftan with grogeously and splendously designed silk. In perusia during A. D 1400 to 1600 minia-ture illumination showed kaftan as a high class symbol more than clothing purpose. They had best quality silk with extra long sleeves draping and had a layers of kaftans one on top of anther as a symbol of wealth These Kaftans with different colors and designs were even more beautiful with their effective combinations and contrast of colors. On the other hand the lower class common people and servants wore simple kaftan with the front part of the kaftan were slipped into the belt in order to be more active and con-venient to work, The real kaftans discovered at Topkapi Saray palace of Turkey from A. D 1300 to 1900 were also compared. These kaftans were very numerous in numbers as well as designs The materials and designs used were also vari-ous such as Chinese to Italian silk. The shaped and pattern itself were not much different from the previous nomad's Kaftans. The Palestian kaftans remained were from the beginning of 19th and 20th century. Since this area is hot and dry desert they used black and navy blue colors mostly in order to exclude the sun lights. The patterns used were similar to Nomads and Bedouin with cross stiches and patch work decorations. In the central Asia they had similar life style and natural environmental cnditions with Turkish tribe which resulted in similar kaftan styles as nomads. Mongols conserved basic patterns of kaftan since Cinggis Khan with deep folding in order to keep warm. At last the kaftans studided in this thesis were classified in to four such as half coat long coat jacket and vest style. A pattern used in the Central Asia were zigzag and ani-mal design whereas in the West Asia were floral plant arabesk and circle pattern. As I discussed previously kaftan styles of nomads in the Asia maintained its basic pat-tern throughout the history except slight changes in color gusset sleeve shapes. These slight changes were made according to the need to adapt the need of environmental natu-ral conditions, The reason for aboriginality of kaftan in Asia was its simplicity and con-venience Most interesting fact is that for all these years Mongols are still wearing kaftan in their life ensuring us that they art the preserves of old kaftan. Since this thesis dealt enormous Asian regions I had a limitation of not being able to cover the Far Esatern asian areas such as Korea China and Japan how these kaftans were influenced in their clothing history as well as Eastern and Western culture. This topic along with the studies on materials and designs of patterns of kaftan will be another research project in the future.