• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.3
• /
• pp.193-202
• /
• 2009

This study was conducted to identify the magnitude of first flush in small city urban area and to provide the basic information on the criteria of stormwater runoff management. Monitoring site was surrounded by residential area in Gumi city near to national industrial complex and the monitoring period was three months. Total watershed area was 24.9 ha, where 80% of the area is impervious (asphalt of pavement type). Periodic monitoring of conventional water quality parameters were conducted with six times of rainfall period. Event mean and site mean concentrations for all the parameters were calculated based on the analytical results. Particle size distribution was 9.82 ${\mu}m$ for $D_{0.1}$, 38.99 ${\mu}m$ for $D_{0.5}$ and 159.61 ${\mu}m$ for $D_{0.9}$ respectively. First flush phenomenon was detected highly in particulate solids than dissolved ones. The first flush criteria results by mass first flush contained between 44.4% to 58.5% pollutant mass during the first 30% of runoff volume. Mass first flush ratio and particle size distribution obtained in this study are expected to provide the basic information for the design and operation of non-point source treatment facility.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.21-26
• /
• 2017

In this study, performance tests were conducted to investigate the applicability of a double-tube heat recovery ventilation system. Paper, aluminum, polymer, were investigated as materials for the inner tube using the same exhaust-air volume. In all cases, the temperature exchange efficiency of the aluminum tube was the highest, while the paper tube showed similar results to those of the polymer tube. This probably resulted from the differences in thermal conductivity and thicknesses of the materials. The humidity exchange efficiency was the highest for the paper tubes in all cases, while the aluminum tubes and polymer tubes showed similar results. The total heat exchange efficiency, which includes the values of humidity exchange and temperature exchange, was highest in the case of the paper tube, and the aluminum tube and the polymer tube showed similar results. In the case of the paper tube, sensible heat and latent heat exchange occur at the same time, and the coefficient of energy of the aluminum tube and polymer tube are large values, when to be compared with only applicably sensible heat exchange coefficient of the aluminum tube and the polymer tube of total heat exchange efficiency value. The results of this study could be applied to the design of a ventilation system.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.105-118
• /
• 2015

Purpose - The objective of this study is to verify whether there are differences between Korean and Chinese consumers in the importance of the attributes such as shopping value and loyalty in social commerce. With the purpose of finding out these differences, the following questions are set up as research questions. First, will there be a difference between Korea and China in the importance of attributes of social commerce? Second, will there be a difference between Korean and Chinese consumers in shopping value? Third, will there be a difference between Korean and Chinese consumers in their loyalty? Research design, data, and methodology - The researchers collected data through self-administered questionnaires from Korean and Chinese consumers who had used social commerce within the past six months before answering the questionnaire. First, for social commerce users in Korea, comprising male and female university students in Chungcheong, a questionnaire was circulated. For social commerce users in China, university students within Beijing were surveyed. Responses to 336 questionnaires were used, excluding those with no answers or unreliable answers. Data coding and data cleaning were used. SPSS 18.0 was used. First, exploratory factor analysis is done to verify the validity of testing tools, and Cronbach's α coefficient is used to verify credibility. For factor analysis, the Varimax method is used. To verify the internal consistency reliability of each factor, the Cronbach's α coefficient is used to verify the credibility. Second, a T-test is done to verify differences between Korean and Chinese consumers for the importance of attributes. Third, ANOVA (Analysis of variance) is done to verify differences between Korean and Chinese consumers in shopping value and loyalty. Results - When Korean and Chinese consumers use social commerce, first, the importance of the attributes of social commerce is affected by four factors; playfulness and economic factors are more important to Korean consumers than Chinese consumers. As for informativeness factors, including product information and quality, and buyer comments, there was no confirmed difference between Korean and Chinese consumers. The convenience factor is more important to Chinese consumers than Korean consumers. Second, the factors affecting shopping value for Korean and Chinese consumers were hedonic shopping value and rational shopping value. To see the difference between Korean and Chinese consumers in shopping value factors, a t-test is conducted. As a result, in the rational shopping value factors of social commerce, Korean consumers scored higher than did Chinese consumers. These results were verified to be meaningful through statistics. In the hedonic shopping value factor of social commerce, Korean consumers scored higher than Chinese consumers. These results showed a significant difference. Third, loyalty in social commerce is higher for Chinese consumers than for Korean consumers. However, there is no difference in loyalty depending on sex. Conclusions - These results will hopefully be valuable and used in the future by Korean companies that wish to enter the Chinese social commerce market.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.57-70
• /
• 2015

Purpose - Open source software has high utilization in most of the server market. The utilization of open source software is a global trend. Particularly, Internet infrastructure and platform software open source software development has increased rapidly. Since 2003, the Korean government has published open source software promotion policies and a supply promotion policy. The dynamism of the open source software market, the lack of relevant expertise, and the market transformation due to reasons such as changes in the relevant technology occur slowly in relation to adoption. Therefore, this study proposes an assessment model of services provided in an open source software service company. In this study, the service level of open source software companies is classified into an enterprise-level assessment area, the service level assessment area, and service area. The assessment model is developed from an on-site driven evaluation index and proposed evaluation framework; the evaluation procedures and evaluation methods are used to achieve the research objective, involving an impartial evaluation model implemented after pilot testing and validation. Research Design, data, and methodology - This study adopted an iteration development model to accommodate various requirements, and presented and validated the assessment model to address the situation of the open source software service company. Phase 1 - Theoretical background and literature review Phase 2 - Research on an evaluation index based on the open source software service company Phase 3 - Index improvement through expert validation Phase 4 - Finalizing an evaluation model reflecting additional requirements Based on the open source software adoption case study and latest technology trends, we developed an open source software service concept definition and classification of public service activities for open source software service companies. We also presented open source software service company service level measures by developing a service level factor analysis assessment. The Behavior-Structure-Evolution Evaluation Model (BSEM) proposed in this study consisted of a rating methodology for calculating the level that can be granted through the assessment and evaluation of an enterprise-level data model. An open source software service company's service comprises the service area and service domain, while the technology acceptance model comprises the service area, technical domain, technical sub-domain, and open source software name. Finally, the evaluation index comprises the evaluation group, category, and items. Results - Utilization of an open source software service level evaluation model For the development of an open source software service level evaluation model, common service providers need to standardize the quality of the service, so that surveys and expert workshops performed in open source software service companies can establish the evaluation criteria according to their qualitative differences. Conclusion - Based on this evaluation model's systematic evaluation process and monitoring, an open source software service adoption company can acquire reliable information for open source software adoption. Inducing the growth of open source software service companies will facilitate the development of the open source software industry.

• Journal of the Korea Convergence Society
• /
• v.12 no.10
• /
• pp.343-352
• /
• 2021

A convergence study was conducted to develop a smartphone application for self-practice of core nursing skills and evaluate its usefulness for undergraduate nursing students. Mobile Application Rating Scale and seven essay questionnaire were used to for usability evaluation among 22 undergraduate nursing students. The score of the information domain was the highest with 4.19(SD 0.79). The subjective quality domain showed the lowest score of 3.08(SD 0.87). Participants' performance confidence score was 8.23(SD 1.60), and learning satisfaction score was 7.89(SD 0.87). Participants reported that the convenience and repetitive self-learning were the strengths of the app. In addition, design and technical supplementation, and lecturer-feedback would improve effectiveness of the current educational app. Findings of this convergent study would be helpful to promote the application of mobile apps for effective self-learning of core nursing skills in undergraduate nursing education. Future resesarch is needed to examine effectiveness study of mobile app on the performance of core nursing skills.

• Journal of the Korean Society for information Management
• /
• v.36 no.1
• /
• pp.247-267
• /
• 2019

There has been low use of local information services that public libraries provide, and most of those services are limited only through in-house reading or checkout. Motivated by these issues, the study has developed a mobile application (app, hereafter) entitled as LibPass (a combination of Library and Pass) to propose new local information services that reflect the information needs of users. Regarding the design of LibPass, contents of LibPass are composed of the characteristics of local resources so that users can easily search for information about local culture and tour resources through mobile app. That is, it aims to provide efficient information services on local resources by providing information on accommodations, outdoor programs, and specialized libraries, as well as introducing tour resources. Above all, the services are provided with a single card issued by the National Library of Korea and is convenient to use anywhere in the country. It not only secures reliability and currency by utilizing various contents developed by public institutions, but also provides functions to facilitate specialized services for the local information of libraries. Based on the previous research, the present study derives the factors of quality evaluation of mobile tour information services; it constructs objects of LibPass application by analyzing existing applications and develops the prototype based on logical entity relationship model. This model can contribute to the increased use of local information services and, promotes the public's positive perception of the libraries through user-friendly applications.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.6
• /
• pp.800-807
• /
• 2019

Objective: The aim was to evaluate backgrounding beef steers on oat + ryegrass pastures mixed with vetch and/or using energy supplementation. Methods: A randomized block design with three treatments and three replications was used. The treatments were: grass + supplement (oat + ryegrass + supplementation), legume + supplement (oat + ryegrass + vetch + supplementation) and grass + legume (oat + ryegrass + vetch). A continuous grazing system with a variable stocking rate was used. Twenty-seven intact crossbred steers (1/4 Marchigiana, 1/4 Aberdeen Angus and 2/4 Nellore) aged 7 months old and average weight of 190 kg were used. Steers were supplemented at 1% of the body weight of ground corn. The experiment lasted 84 days, between May and August 2014. Behavioral assessments were performed two times per experimental period, for 24 hours. Results: The forage mass was different between treatments, being greater for steers fed without legume. The accumulation rate, forage allowance, and stocking rate did not differ between treatments due to the adequate adjustment of forage allowance. The final weight of animals, as well as the dry matter intake (kg/d), did not differ between treatments. However, forage intake was higher for non-supplemented animals in relation to supplemented steers. Supplement intake did not alter the total digestible nutrient intake due to pasture quality. Animals fed grass + supplement had higher live weight gain per area than those fed grass + legume. Animals without supplementation spent more time in grazing. Conclusion: Feeding behavior was not altered by mixing with vetch or supplementation. Non-supplemented animals started the grazing peak earlier and spent more time in grazing than those supplemented; however, the average daily gain was similar between treatments. The live weight gain per hectare was 47% higher in pastures in which the animals received supplementation compared with those mixed with vetch, a consequence of the substitutive effect.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.33 no.3
• /
• pp.101-109
• /
• 2021

Wave observations using a marine X-band radar are conducted by analyzing the backscattered radar signal from sea surfaces. Wave parameters are extracted using Modulation Transfer Function obtained from 3D wave number and frequency spectra which are calculated by 3D FFT of time series of sea surface images (42 images per minute). The accuracy of estimation of the significant wave height is, therefore, critically dependent on the quality of radar images. Wave observations during Typhoon Maysak and Haishen in the summer of 2020 show large errors in the estimation of the significant wave heights. It is because of the deteriorated radar images due to raindrops falling on the sea surface. This paper presents the algorithm developed to increase the accuracy of wave heights estimation from radar images by adopting convolution neural network(CNN) which automatically classify radar images into rain and non-rain cases. Then, an algorithm for deriving the Hs is proposed by creating different ANN models and selectively applying them according to the rain or non-rain cases. The developed algorithm applied to heavy rain cases during typhoons and showed critically improved results.

• Journal of Korean Library and Information Science Society
• /
• v.53 no.3
• /
• pp.263-285
• /
• 2022

This study presented the factor analysis on constructing the new factors affecting the middle school students' online learning behaviors from the questionnaires employed among middle school students. A total of 204 students participated and the data were collected in South Korea. The sample of middle school ninth-grade students was selected and used through purposive sampling. Findings from the factor analysis provided evidence for the eight-factor solution for the 35-items accounting for 66.15% of the shared variance. A wide range of factors has been considered to identify students' online learning behaviors. The appropriate experience and use of e-learning in the middle school period is also important as it will be a critical stepstone for future education. This research provides information that has been taken into account for advancing online learning to enhance the quality of e-learning systems for middle school students. The study results provided eight new factors affecting the middle school students' online learning behaviors; that is 1) communication using social media as a learning tool, 2) intention to share information using ICT, 3) addiction of technology, 4) adoption of technology, 5) seeking information using ICT, 6) use of social media learning, 7) information search using ICT, and 8) immersion of technology. This study confirmed that middle school students prefer communication using social media as a learning tool, and value intention to share information using ICT for the most part. The data obtained based on factor analysis can highlight the online learning behaviors towards a mixture of social media learning and ICT to ensure a new educational platform for the future of e-learning. This research expects to be useful for both middle schools of online learning to better understand students' online learning behaviors and design online learning environments and information professionals to better assist students who particularly need digital literacy.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.4
• /
• pp.337-348
• /
• 2023

The central objective of this study is to curtail the leakage of mortar or cement paste, often resultant of ill-constructed formwork, by implementing thixotropy in the formulation of high-fluidity, standard-strength concrete. When such concrete is utilized in smaller scale construction projects, instances of formwork gaps due to suboptimal construction precision may lead to significant leakage of mortar and paste, a problem not typically encountered with traditional slump-flow concrete. In this investigation, Polyvinyl Alcohol(PVA) and borax are incorporated into the concrete mixture to induce thixotropy. The experimental design includes varying methodologies for integrating PVA and borax, while assessing alterations in diverse concrete performances, including thixotropy and leakage reduction potential that simulates formwork gap conditions. Under the experimental conditions defined within this study, it was found that replacing, rather than merely adding PVA and borax, aids in averting water addition via suspensions. This approach yielded promising results in terms of concrete properties and proved efficacious in stemming leakage in concrete possessing sufficient thixotropy. Notably, when a 6% PVA suspension was substituted, a significant reduction in leakage was observed. Consequently, it is projected that construction quality can be ensured, even with lower precision formwork, by applying thixotropy to concrete through the use of PVA and borax.