• Journal of the Korean GEO-environmental Society
• /
• v.2 no.4
• /
• pp.73-81
• /
• 2001

Soil cement has been the typical material for the pavement and soft ground improvement. It has not been used up to date because that quality control is not easy and durability is not long enough for practical application. Since environmental influence is important, the application of high strength soil cement pavement has been increased for pedestrian roads of the garden, golf courses and sidewalks recently. In this study, the reference table was suggested for mixing design with appling statistical experimental technique to reference table. The reference table showed the relationship among improved strength, Soilcrete stabilizer, fine sand ratio and superplasticizer agent. The objective soil used in this study was the soft marine clay that is widely found in Korea, the compressive strength range of improved soil was between $50{\sim}150kg/cm^2$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.8
• /
• pp.1124-1131
• /
• 2011

This study performed the prediction about the indoor contaminant's diffusion characteristics which can be affected by the mechanical ventilation system on a training ship. The results are as followings. It is clear that the contaminants are spread to most of the indoors, regardless of the contamination beginning zone. About 65~100 minutes later, the contaminant densities of whole indoor zones are evaluated as clean. Comparing the contamination beginning zone being located at higher deck(scenario A) to the contamination beginning zone being located at lower deck(scenario B), although the contaminant density by scenario A is 10 times higher than that by scenario B, the number of contaminated zones are 50% less. The contaminant densities are evaluated as to be rapidly decreased when the outside air induction ratio against design volume is over 75%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.264-267
• /
• 2003

B2B electronic commerce of various form is gone present and e-Catalog that is used in electronic commerce is important element middle who can express well special quality of corporation's goods and product most effectively from infinite internet space. But, e-Catalog system that is used in electronic commerce is no clear concept and consistent component etc. and is constructing dissimilar system and there is shortcoming that can not use e-Catalog information exchange and transaction thereby. Propose XML(eXtensible Markup Language) in e-Catalog's standard document format to augment interoperability in selfishness species system in treatise that see hereupon, and defined e-Catalog document structure that can process goods information configurationally because using XML Schema. Also, e-Catalog registry system that offer search, registration service using e-Catalog document that is defined by XML design and embody.

• Journal of KIISE
• /
• v.44 no.6
• /
• pp.581-586
• /
• 2017

For automatic web scraping, unnecessary components such as menus and advertisements need to be removed from web pages and main contents should be extracted automatically. A content block tends to be located in the middle of a web page. In particular, Korean web documents rarely include metadata and have a complex design; a suitable method of content extraction is therefore needed. Existing content extraction algorithms use the textual and structural features of content blocks because processing visual features requires heavy computation for rendering and image processing. In this paper, we propose a new content extraction method using the tag positions in HTML as a quasi-visual feature. In addition, we develop a tag rank position, a type of tag position not affected by text length, and show that gradient boosting with the tag rank position is a very accurate content extraction method. The result of this paper shows that the content extraction method can be used to collect high-quality text data automatically from various web pages.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3648-3657
• /
• 2014

This study aims to enhance child care teachers' ability to offer health care by developing an educational program for children's health care and safety. This study was carried out using a one-group pretest-posttest design based on a survey of 400 child care teachers in 3 cities. The educational program for child care teachers consisted of three parts: child health observations, disease management for child and emergency care for children. The educational program was conducted 3 times for 3 hours, totaling 9 hours. The educational program showed better grades of child care teachers in child health observation, emergency care for children, and disease management for children. The finding indicates that more child care teachers will adopt a health care education program to improve the quality of child care service.

• KIEAE Journal
• /
• v.14 no.4
• /
• pp.111-117
• /
• 2014

In South Korea, the government has recently enforced regulations associated with buildings. Temperature restriction in indoor environment is one of the common ways of energy reduction in order not to dissipate heating and cooling energy; however the people who are in restricted temperature feels uncomfortable. Furthermore, occupants cannot feel the same thermal sensation even they are in the same place. For the reason, occupants should express their thermal sensation and HVAC system should be able to apply their demand. It is proved by an adaptive principle. The adaptive model means that people react in ways which tend to restore their comfort, when change occurs such as to produce discomfort. In order to design HVAC control strategies based on adaptive model, we designated an existing office building as a reference building to gather data from actual field. Furthermore, we gathered occupants' thermal sensation and clothing insulation in real-time. We filtered the data with Kalman's filter method. The data was reasonable when there is an alarm messages for asking questionnaire. The response ratio were different in occupants' thermal condition. In conclusion, the filtered occupants' thermal sensation can be used as a real time HVAC control and input value of HVAC control.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.6
• /
• pp.1064-1074
• /
• 1994

In this paper, an optimum TCM(trellis coded modulation)combined with CPM(continuous phase modulation) signal is investigated, and the performances are evaluated on the two-ray fading channel, which is one of the well-known frequency-selected because of their relatively good power and spectrum efficiency, and the modulation index is varied from 0.1 to 0.6. The performance is evaluated for each modulation index. The constraint length of the encoder, which is comprised in TCM, is chosen to be 2 and 3. From the performance evaluations, when the constraint length is 3 and modulation index 0.5, a power gain if the optimum TCM over the scheme without coding is observed to be 2.0dB for 1REC and 2.1dB for 3RC, respectively, on the fading channel. Thus, a significant improvement on the line quality is expected when the optimum TCM presented in this paper is employed in digital mobile radio applications.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.81-85
• /
• 2012

As business environment and complex work conditions are rapidly changing, large financial institutions are doing research on various fields to build a system that will efficiently and accurately process the production and modification of financial information and minimize the error in data-processing. In this paper, we have built a metadata system that, among various research areas, gives stability, accuracy and convenience in financial data modelling, analyze its effect and when adapting new models, provide mapping information from existing model to efficiently connect models and databases. If we manage modelling and standard data through this metadata system, the data standardization and database can process the model modification work in an unitary system and consistent high quality data model can be maintained and managed when data modification occurs.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.7-17
• /
• 2015

In this paper, we propose a single antenna SSD(simultaneous single band duplex) system using turbo equalizer. The proposed system communicates simultaneously on single band. That is the proposed system is full-duplex system. The proposed system uses balanced feed network circuit to improve isolation in single antenna structure. Also, the proposed system uses RF(radio frequency) cancellation and digital cancellation to cancel self-interference. Additionally, the proposed system uses turbo equalizer to equalize ISI(inter-symbol interference) by harsh multipath fading and to collect bit errors by residual self-interference signals. By using turbo equalizer, the proposed system guarantees QoS(quality of service). In this paper, we uses Simulink simulation program to analyze performance of the proposed system. The simulation results confirm that proposed system can communicate simultaneously by using balanced feed network, RF cancellation, digital cancellation and turbo equalizer in harsh multipath channel on single band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12C
• /
• pp.199-207
• /
• 2001

We propose an adaptive shaping controller equipped with the technologies of shaping and buffering VoIP packets arriving at the receiving end by the CAM-type controller. In order to conceal interarrival packet delay variation, the conventional jitter buffers force them to be too large, thereby causing the audio quality to suffer excessive delay. However, by using our proposed method, the delay caused by shaping operation dynamically increases or decreases on the level of jitter that exists with in the IP network. This makes the delay accommodates adaptively the network jitter condition. The less jitter network has the fewer delay the shaping controller requires for jitter elimination. And the CAM-type method generally makes the shaping operation faster and leads to processing packets in as little time as can. We analyse the packet loss and delay performance dependency on the average talk ratio and the number of jitter buffer entries in shaping controller. Surprising, we show that the average delay using our shaping controller is about 70msec. This performance is much better than with the delay equalization method which forces the receiving end to delay about 60msec.