• Korean Journal of Remote Sensing
• /
• v.34 no.2_2
• /
• pp.377-391
• /
• 2018

In order to efficiently monitor red tide over a wide range, the need for red tide detection using remote sensing is increasing. However, the previous studies focus on the development of red tide detection algorithm for ocean colour sensor. In this study, we propose the use of multi-sensor to improve the inaccuracy for red tide detection and remote sensing data in coastal areas with high turbidity, which are pointed out as limitations of satellite-based red tide monitoring. The study area were selected based on the red tide information provided by National Institute of Fisheries Science, and spatial fusion and spectral-based fusion were attempted using GOCI image as ocean colour sensor and Landsat OLI image as terrestrial sensor. Through spatial fusion of the two images, both the red tide of the coastal area and the outer sea areas, where the quality of Landsat OLI image was low, which were impossible to observe in GOCI images, showed improved detection results. As a result of spectral-based fusion performed by feature-level and rawdata-level, there was no significant difference in red tide distribution patterns derived from the two methods. However, in the feature-level method, the red tide area tends to overestimated as spatial resolution of the image low. As a result of pixel segmentation by linear spectral unmixing method, the difference in the red tide area was found to increase as the number of pixels with low red tide ratio increased. For rawdata-level, Gram-Schmidt sharpening method estimated a somewhat larger area than PC spectral sharpening method, but no significant difference was observed. In this study, it is shown that coastal red tide with high turbidity as well as outer sea areas can be detected through spatial fusion of ocean colour and terrestrial sensor. Also, by presenting various spectral-based fusion methods, more accurate red tide area estimation method is suggested. It is expected that this result will provide more precise detection of red tide around the Korean peninsula and accurate red tide area information needed to determine countermeasure to effectively control red tide.

• Nuclear Medicine and Molecular Imaging
• /
• v.41 no.4
• /
• pp.317-325
• /
• 2007

Purpose: Biological parameters can be quantified using dynamic PET data with compartment modeling and Nonlinear Least Square (NLS) estimation. However, the generation of parametric images using the NLS is not appropriate because of the initial value problem and excessive computation time. In irreversible model, Patlak graphical analysis (PGA) has been commonly used as an alternative to the NLS method. In PGA, however, the start time ($t^*$, time where linear phase starts) has to be determined. In this study, we suggest a new Multiple Linear Analysis for irreversible radiotracer (MLAIR) to estimate fluoride bone influx rate (Ki). Methods: $[^{18}F]Fluoride$ dynamic PET scans was acquired for 60 min in three normal mini-pigs. The plasma input curve was derived using blood sampling from the femoral artery. Tissue time-activity curves were measured by drawing region of interests (ROls) on the femur head, vertebra, and muscle. Parametric images of Ki were generated using MLAIR and PGA methods. Result: In ROI analysis, estimated Ki values using MLAIR and PGA method was slightly higher than those of NLS, but the results of MLAIR and PGA were equivalent. Patlak slopes (Ki) were changed with different $t^*$ in low uptake region. Compared with PGA, the quality of parametric image was considerably improved using new method. Conclusion: The results showed that the MLAIR was efficient and robust method for the generation of Ki parametric image from $[^{18}F]Fluoride$ PET. It will be also a good alternative to PGA for the radiotracers with irreversible three compartment model.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.1
• /
• pp.8-34
• /
• 2014

We reviewed foreign evaluation systems based on the macrobenthic and macroalgal communities and developed a system, composed of a set of ecological indices able to evaluate the functionality (FI, Functional Index; estimation of stability and productivity) and maturity (MI, Maturity Index; comparisons with biological parameters of natural reefs) of artificial reefs by comparing the status in the adjacent natural reefs in Korean coastal waters. The evaluation system was applied to natural and artificial reefs/reef-planned areas (natural reefs), established in the 5 marine ranching areas (Bangnyeong-Daechung, Yeonpyung, Taean, Seocheon and Buan) in the west coast of Korea. The FI ranged between 31.6 (Bangnyeong-Daechung) and 72.5% (Buan) and MI did between 53.1 (Seocheon) and 76.9% (Taean) in average. The evaluation of artificial reefs by the two indices, showed the most appropriate status in Taean. The FI between the adjacent artificial and natural reefs were in significant linear relationship ($r^2=0.83$, p=0.01). This indicated the local status of biological community may be critical in determining the functionality of the artificial reefs. We have suggested an integrative but preliminary evaluation system of artificial reefs in this study. The output from the evaluation system may be utilized as a tool for environment/resource managers or policy makers, responsible for effective use of funds and decision making. Given the importance, we need to use the options to enhance and improve the accuracy as follows: (1) continuous validation of the evaluation system and rescaling the criteria of indicators, (2) vigorous utilization of observation and experience through the application and data accumulation and (3) development and testing of brand-new indicators.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.2
• /
• pp.217-223
• /
• 2008

Amylose and protein contents are important traits determining the edible quality of rice, especially in East Asian countries. Near-Infrared Reflectance Spectroscopy (NIRS) has become a powerful tool for rapid and nondestructive quantification of natural compounds in agricultural products. To test the practically of using NIRS for estimation of brown rice amylose and protein contents, the spectral reflectances ($400{\sim}2500\;nm$) of total 9,483 accessions of rice germplasm in Rural development Administration (RDA) Genebank ere obtained and compared to chemically determined amylose and protein content. The protein content of tested 119 accessions ranged from 6.5 to 8.0% and 25 accessions exhibited protein contents between 8.5 to 9.5%. In case of amylose content, all tested accessions ranged from 18.1 to 21.7% and the grade from 18.1 to 19.9% includes most number of accessions as 152 and 4 accessions exhibited amylose content between 20.5 to 21.7%. The optimal performance calibration model could be obtained from original spectra of brown rice using MPLS (Modified Partial Least Squares) with the correlation coefficients ($r_2$) for amylose and protein content were 0.865 and 0.786, respectively. The standard errors of calibration (SEC) exhibited good statistic values: 2.078 and 0.442 for amylose and protein contents, respectively. All these results suggest that NIR spectroscopy may serve as reputable and rapid method for quantification of brown rice protein and amylose contents in large numbers of rice germplasm.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.891-897
• /
• 2017

Apple (Malus domestica) is a climacteric fruit because of its high respiration and ethylene production. Ethylene affects the fruit by decreasing its quality and storability. Md-ACS1 and Md-ACO1 genes are involved in ethylene biosynthesis in apple; the Md-ACS1-2 and Md-ACO1-1 alleles are associated with low ethylene production. We conducted an analysis to study Md-ACS1 and Md-ACO1, and to examine ethylene production and softening rate of fruit at room temperature ($20^{\circ}C$) storage in 'Fuji (FJ)', 'Golden Supreme (GS)', and 5 cultivars of Korean apples ('RubyS (RS)', 'Hongro (HR)', 'Arisoo (AS)', 'Summer King (SK)', 'Greenball (GB)'). The result showed that an increase in the number of the alleles (ACS1-2, ACO1-1) decreased the ethylene production and softening rate. The presence of ACS1-1/1, ACO1-1/2 was confirmed in GS and the highest ethylene production and softening rate was observed. Ethylene production and softening rate of SK and GB expressing ACS1-1/2, ACO1-1/2 were higher than that of HR and AS, expressing ACS1-2/2, ACO1-1/2, but lower than GS. FJ with ACS1-2/2, ACO1-1/1 showed the lowest ethylene production and softening rate among all cultivars except RS. The Md-ACS1 and Md-ACO1 DNA markers could potentially be used to estimate storability and applied in marker assisted selection the improve the efficiency of apple breeding.

• Journal of Radiation Protection and Research
• /
• v.40 no.1
• /
• pp.1-9
• /
• 2015

Compton cameras overcome several limitations of conventional mechanical collimation based gamma imaging devices, such as pin-hole imaging devices, due to its electronic collimation based on coincidence logic. Especially large-scale Compton camera has wide field of view and high imaging sensitivity. Those merits suggest that a large-scale Compton camera might be applicable to monitoring nuclear materials in large facilities without necessity of portability. To that end, our research group have made an effort to design a large-scale Compton camera for safeguard application. Energy resolution or position resolution of large-area detectors vary with configuration style of the detectors. Those performances directly affect the image quality of the large-scale Compton camera. In the present study, a series of Geant4 Monte Carlo simulations were performed in order to examine the effect of those detector parameters. Performance of the designed large-scale Compton camera was also estimated for various monitoring condition with realistic modeling. The conclusion of the present study indicates that the energy resolution of the component detector is the limiting factor of imaging resolution rather than the position resolution. Also, the designed large-scale Compton camera provides the 16.3 cm image resolution in full width at half maximum (angular resolution: $9.26^{\circ}$) for the depleted uranium source considered in this study located at the 1 m from the system when the component detectors have 10% energy resolution and 7 mm position resolution.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.305-313
• /
• 2020

The use of cable tunnels for electric power transmission as well as their construction in difficult conditions such as in subsea terrains and large overburden areas has increased. So, in order to efficiently operate the small diameter shield TBM (Tunnel Boring Machine), the estimation of advance rate and development of a design model is necessary. However, due to limited scope of survey and face mapping, it is very difficult to match the rock mass characteristics and TBM operational data in order to achieve their mutual relationships and to develop an advance rate model. Also, the working mechanism of previously utilized linear cutting machine is slightly different than the real excavation mechanism owing to the penetration of a number of disc cutters taking place at the same time in the rock mass in conjunction with rotation of the cutterhead. So, in order to suggest the advance rate and machine design models for small diameter TBMs, an EPB (Earth Pressure Balance) shield TBM having 3.54 m diameter cutterhead was manufactured and 19 cases of full-scale tunneling tests were performed each in 87.5 ㎥ volume of artificial rock mass. The relationships between advance rate and machine data were effectively analyzed by performing the tests in homogeneous rock mass with 70 MPa uniaxial compressive strength according to the TBM operational parameters such as thrust force and RPM of cutterhead. The utilization of the recorded penetration depth and torque values in the development of models is more accurate and realistic since they were derived through real excavation mechanism. The relationships between normal force on single disc cutter and penetration depth as well as between normal force and rolling force were suggested in this study. The prediction of advance rate and design of TBM can be performed in rock mass having 70 MPa strength using these relationships. An effort was made to improve the application of the developed model by applying the FPI (Field Penetration Index) concept which can overcome the limitation of 100% RQD (Rock Quality Designation) in artificial rock mass.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.4
• /
• pp.76-83
• /
• 2018

The purpose of this study is to analyze people who applied for and passed engineer landscape architecture examination that had been conducted from 2007 to 2016, the test frequency and trends by the question types in the landscape structure construction and management area, and the test tendencies and features by question types, and thereby to find the test trends for landscape structure construction and management in engineer landscape architecture examination. the analysis results are presented as follows: The people who applied for and passed engineer landscape architecture examinations that had been conducted from 2007 to 2016 were analyzed. as a result, the numbers of applicants and those who passed the examination have been on the decrease from 2011 and from 2012, respectively. the 10-year average rate of successful applicants for engineer landscape architecture examination was 11.2%. The test frequency and trends by the question types in the landscape structure construction area, and the test tendencies and features were analyzed. as a result, based on the key words in the seven categories (construction plan & process management, landscape materials, landscape planting foundation, work classification based construction, landscape estimation, basic structural mechanics, and survey), the questions about work classification based construction accounted for the largest, or 25.2%, and the questions about landscape planting foundation accounted for 3.3%. therefore, landscape planting foundation had lower test frequency and was less important than other categories. The test frequency and trends by the question types in the landscape management area, and the test tendencies and features were analyzed. as a result, based on the key words in the nine categories (operation and use & maintenance, pruning management, fertilization management, weed management, irrigation and drainage management, wintering management, pest management, and lawn management, and landscape facility management), the questions about operation and use & maintenance accounted for the largest, or 37.2%, and the numbers of the questions about fertilization management and irrigation & drainage management and of the questions about waterscape facility of landscape facility management have been on the increase from 2011 and from 2015, respectively. According to the analysis on the test tendencies for landscape structure construction and management areas in the examination there have been questions in a wide range and variety of categories. in terms of the landscape structure construction area, the frequency of questions in work classification based construction, landscape materials, and excellent quality in terms of the landscape management area, the frequency of questions in fertilization management, irrigation & drainage management, and waterscape facility of landscape facility management tends to increase because of environmental factors like climate change.

• Journal of Wetlands Research
• /
• v.17 no.2
• /
• pp.193-202
• /
• 2015

In this study, a long term monitering of nonpoint source pollution runoff is conducted at the area of transportation related and EMCs(Event Mean Concentrations) in terms of water quality items, such as BOD, $COD_{Mn}$, SS, T-N and T-P are determined for each not only runoff event and but also observation site. On the other hands, SWMM(Storm Water Management Model) model is constructed using the data collected in the transportation areas selected. Model calibration and verification of SWMM is carried out based on the data collected. And simulated EMCs was compared with observed EMCs by monitoring and prior studies. SWMM applicability estimation was Using the compared result. The results of simulation showed that BOD 5.787 ~ 14.475 mg/L, $COD_{Mn}$ 12.946 ~ 59.611 mg/L, SS 13.742 ~ 46.208 mg/L, T-N 2.037 ~ 5.213 mg/L, T-P 0.117 ~ 0.415 mg/L. And a differential between simulated EMCs and observed EMCs is too low so comparing result show high fit(BOD 4.27 %, $COD_{Mn}$ 4.87%, SS 2.31%, T-N 5.78%, T-P 14.45%). A results of compared with the prior studies, BOD and T-P are included range of prior studies, $COD_{Mn}$ and SS are lower than range of prior studies, T-N is higher than range of prior studies. Differential between simulated EMCs and prior studies EMCs was showing for survey seasonal and changing land-use, so from now on, EMCs of using the internal representatives value will be calculated by more monitoring toward various precipitation events.

• Korean Journal of Ecology and Environment
• /
• v.42 no.2
• /
• pp.200-211
• /
• 2009

A mathematical modeling program called Soil and Water Assessment Tool (SWAT) developed by USDA was applied to Kyongan stream watershed. It was run under BASINS (Better Assessment Science for Integrating point and Non-point Sources) program, and the model was calibrated and validated using KTMDL monitoring data of 2004${\sim}$2008. The model efficiency of flow ranged from very good to fair in comparison between simulated and observed data and it was good in the water quality parameters like flow range. The model reliability and performance were within the expectation considering complexity of the watershed and pollutant sources. The results of pollutant loads estimation as yearly (2004${\sim}$2008), pollutant loadings from 2006 were higher than rest of year caused by high precipitation and flow. Average non-point source (NPS) pollution rates were 30.4%, 45.3%, 28.1% for SS, TN and TP respectably. The NPS pollutant loading for SS, TN and TP during the monsoon rainy season (June to September) was about 61.8${\sim}$88.7% of total NPS pollutant loading, and flow volume was also in a similar range. SS concentration depended on precipitation and pollution loading patterns, but TN and TP concentration was not necessarily high during the rainy season, and showed a decreasing trend with increasing water flow. SWAT based on BASINS was applied to the Kyongan stream watershed successfully without difficulty, and it was found that the model could be used conveniently to assess watershed characteristics and to estimate pollutant loading including point and non-point sources in watershed scale.