• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.465-471
• /
• 2017

This study examined the effects of neoliberal educational policy on the appointment system of teachers to assess the impacts of this neoliberal education policy. Neoliberal education policy has led to increased private education cost, and strengthened the function of social stratum reproduction in the education system despite increasing the efficiency and flexibility. Since contracted employment was applied to the educational field, the number of regular teachers began to decrease, while that of contracted teachers increased. For example, the number of contracted teachers was 300 in the 1990, which increased to 42,042 in 2015. Neoliberal education policy contributed to teacher's quantitative demand; however, the increase in the number of contracted teachers is ultimately degrading the education quality. In an education market, the issues of balancing between supply and demand often occur. Therefore, it is necessary to strongly control the number of contracted teachers by limiting their contract period. Furthermore, an institutional device that can convert a contracted teacher to a regular one must be established.

• Journal of the Korean Society of Radiology
• /
• v.11 no.4
• /
• pp.221-225
• /
• 2017

To evaluate the performance of ultrasound imaging system, we investigated the change of spatial resolution according to changing sonic velocity change parameter provided by ultrasound equipment. Ultrasound phantom images were obtained using a 3.0 ~ 5.0 MHz convex transducer in an ultrasound diagnostic device used at a medical institution located at Iksan. N-365 multi-purpose ultrasound phantom was used to measure longitudinal distance measurement accuracy and longitudinal and transverse resolution. In the same manner, the sonic velocity of the ultrasound equipment was changed from 1580 m/sec to 1400 m/sec in six steps, and the full width at half maximum(FWHM) was measured using the image J program to determine whether the measured values were different. As a result, lateral resolution was measured from 1.91 mm to 5.3 mm according to the speed change, and the smallest FWHM was 1.91 mm at 1420 m/sec. The axial resolution was measured from 1.03 mm to 1.14 mm according to the speed change, and the smallest FWHM was 1.03 mm at 1400 m/sec. The slower the sound velocity of the ultrasound equipment, the shorter the length of longitudinal measurement.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.35-39
• /
• 2003

The display technology on the retina is the key role in inspecting the condition of the patients. 2-dimensional retina image is widely used in the eye examination as of today. Recently, 3-dimensional retina image ones have been introduced to this area, but the quality of the image is not fully satisfied to the operator. For the purpose of developing 3-D retina imaging instrument, the optimization of a 3-D retina imaging system using Code-V tool was investigated in this thesis. He-Ne laser having the wavelength 632.8 nm was used to make a power source to detect the retina. Several lenses and mirrors installed on sledge which were developed to perform focus control on 3-D device were designed to make a beam focusing and direct line. Polygon scanner having 24 mirror facets and galvanometer making tilting movement were utilized to make a 2-D laser plane. Also, design of eye ball had been fulfilled to see the focus of the 2-D plane. Reflected ray from retina detected on the sensor array with the same path. All cognitive components were optimized for aberration correction in order to focus on retina. Results of optimization were compared to those of initial designed optics system. On the basis of above results, the result of third aberration has been corrected to stable values to the optical system. MTF evaluating the resolution of an image has been closely correlated to the diffraction limit and PSF indicating the strength distribution of an image has shown the SR value as 0.9998 having high performance. The possibility of new and powerful 3-D retina image instrument was verified by simulating each component of the instrument by Code-V.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.285-292
• /
• 1999

An analytical method applicable to quality control and its optimum conditions were studied for rapid and efficient analysis of sorbic and benzoic acids used as preservatives in the commercial soybean paste. In gas chromatographic analysis of sorbic and benzoic acids, the application of HP-FFAP (acid modified polyethylene) wide bore column improved the separation ability significantly. By setting the oven temperature of GC to $200^{\circ}C$, the total elapsed time for quantitative analysis was also reduced to the level required in using packed column. By extracting sorbic and benzoic acids from soybean paste with an automatic steam distillation device, the elapsed time for analysis was reduced by 80% more compared to using conventional steam distillation method. The recoveries of sorbic and benzoic acids by the automatic steam distillation were 98.1% and 99.9%, respectively. The sorbic acid was found in 3 samples of 14 commercial soybean pastes, of which contents were $466{\sim}530ppm$, while $0.3{\sim}4.4ppm$ of benzoic acid was found in all the samples.

• Journal of Digital Contents Society
• /
• v.12 no.1
• /
• pp.23-32
• /
• 2011

For the past few years, unlike wireless widespread United States and Japan, expensive cost and platform of the mobile web carrier underground and self-centered made achievement of domestic mobile web market sluggish. Nowadays, more and more people pay attention to the mobile web service because of the increased quality of wireless internet, development of mobile device and variety of the flat-rate payment system. However, another big problem is that mobile web is too hard to use. Also, the poor content of mobile web service is an extremely serious problem. In this paper, we put forward a new method for easy to access mobile web service which is use WINC expansion numbers and users can use these numbers to shit their own website. Along with the benefits of purchase WINC number general users are able to make website and control their website at less time and energy.

• Smart Media Journal
• /
• v.6 no.2
• /
• pp.42-49
• /
• 2017

It is important to realize automation services by communicating in IoT with humans, objects & objects, and forming a common network. People used web like the most powerful network way to sharing things and communication. Therefore the efficiency method communication between each device and the web in IoT could be different from ones. The best method for high quality software product in web applications is software reuse ; Modules, classes, patterns, frameworks, and business components are reusable elements of various perspectives. Components is plugged with others through well-defined interfaces, which can overcome the operation and complexity of application development. A web-based distributed environment for IoT applications is a standard architecture use information collected from various devices for developing and using applications. For that reason, the network management which manages the constituent resources for the best service control in IoT application is required as a sub-layer support service in most applications as well as individual applications. In this paper, we measure to develop a network management system based not only by components but on heterogeneous internetworks. For procedure this, we clarify a component architecture for classifying and classify also the component needed in the IOT and network domain or order the type of real network management system.

• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.1
• /
• pp.1-14
• /
• 2019

The names of medical technologist in Korea, Japan, and the United State of America vary depending on the medical system, educational system, and work areas. Conventionally, jobs equal or similar to medical technologist (commonly known as clinical laboratory technologist, medical laboratory technologist, clinical laboratory scientist, and medical laboratory scientist), histotechnologist, cytotechnologist, and genetic technologist. Jobs, such as extracorporeal technologist, medical electrophysiology technologist, and medical sonographer, allow other allied health professionals including medical technologists, to obtain their qualification. The work areas of medical technologists are classified into clinical pathologic technology, pathologic technology, clinical genetics technology, nuclear medicine in vitro technology, and clinical physiologic technology. New titles of Korean specialized medical technologists refer to certification systems, such as CLMJ, CMAJ, ASCP, IAC, ABRET, and ARMDS. Currently, there are eight types of specialized medical technologists under the cooperation of specialized academic societies. They are hematology, transfusionology, chemistry, immunology, microbiology, histology, cytology, nuclear medicine. It can be further divided into 20 categories according to the work areas such as mass spectrometry, infection control, Pathologists' Assistant, flow cytometry, HLA, cytogenetics, molecular genetics, cardiopulmonary physiology, neurophysiology (EEG/EMG/PSG/etc.), cardiac sonography, neurosonography (TCD/carotid), and medical device quality manager.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.285-295
• /
• 2018

Purpose: The aim of this study is to develop a three-wheel riding cultivator for improving the performance of the current four-wheel riding cultivators in the market. Methods: A prototype three-wheel riding cultivator with the rated power of 15.5-kW, a primary hydrostatic and a two-speed selective gear transmission shifts, front/rear three-wheel drive, a hydraulic wheel tread adjustment, and the mid-section attachment of the major implements was designed and constructed. Its specifications and basic performance are investigated. Results: The maximum speeds of the prototype at the low and high stages were measured to be approximately 7.31, and 11.29 km/h in forward travel, respectively, and approximately 3.60, and 6.37 km/h in rearward travel, respectively. The minimum ground clearance is shown to be 670 mm. The rotating speeds of the power takeoff (PTO) shaft at the low and high stages are shown to be approximately 795 and 1,140 rpm, respectively. The tread of the rear wheels, the minimum radius of turning, and the maximum lifting height of the parallel link device are measured to be within 1,320-1,720 mm, 2.80 m, and 390 mm, respectively. Approximately 25.3% and 74.7% of the total weight of the prototype are distributed in the front and rear wheels on flat ground, respectively. When the tread of rear wheels increased from 1,320 to 1,720 mm, the left and right static lateral overturning angles increased from $33.4^{\circ}$ to $39.1^{\circ}$ and from $29.0^{\circ}$ to $36.1^{\circ}$, respectively. Conclusions: The prototype three-wheel riding cultivator showed a wide range of travel and PTO speeds, high minimum ground clearance, small minimum radius of turning, and easy control of the rear wheel tread. Further, the easy observation of cultivating operations by mid-mounting the implements can improve quality of work. Therefore, the prototype is expected to contribute to the riding mechanization of cultivating operations for various upland crops in Korea.

• Journal of Industrial Convergence
• /
• v.16 no.1
• /
• pp.21-26
• /
• 2018

The Seaborne Trade Volume accounts for 97% of the total. This means that the port operation management system can improve port efficiency, reducing operating costs, and the manager who manages all operations at the port needs to check and respond quickly when delays of work and equipment support is needed. Based on the real-time location information confirmation of yard automation equipment used the existing system GPS, the real-time location information confirmation system is a GPS system of the tablet, rather than a port operation system that monitors location information for the entered information, depending on the completion of the task or the start of the task. Network configurations also reduce container processing delays by using commercial LTE services that do not have shading due to containers in the yard also reduce container processing delays. Trough introduction of smart devices using Android or IOS and container processing scheduling utilizing artificial intelligence, we will build a minimum delay system with Smart Device usage of container processing applications and optimization of container processing schedule. The adoption of smart devices and the minimization of container processing delays utilizing artificial intelligence are expected to improve the quality of port services by confirming the processing containers in real time to consumers who are container information demanders.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.7
• /
• pp.361-365
• /
• 2007

Aero-pulsation noise, generally caused by geometric asymmetry of a rotating device, is one of considerable sources of annoyance in passenger cars using the turbocharged diesel engine. Main source of this noise is the compressor wheel in the turbocharger system, and can be reduced by after-treatment devices such as silencers, but which may increase the manufacturing cost. More effective solution is to improve the geometric symmetry over all, or to control the quality of components by sorting out inferior ones. The latter is more simple and reasonable than the former in view of manufacturing. Thus, an appropriate discrimination method should be needed to evaluate aero-pulsation noise level at the production line. In this paper, we introduce the accurate method which can measure the noise level of aero-pulsation and also present its evaluation criteria. Besides verifying the reliability of a measurement system - a rig test system-, we analyze the correlation between the results from rig tests and those from vehicle tests. The gage R&R method is carried out to check the repeatability of measurements over 25 samples. From the result, we propose the standard specification which can discriminate inferior products from superior ones on the basis of aero-pulsation noise level.