• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.33-39
• /
• 2021

As the interest and demand in the recycled yarn field has increased rapidly worldwide, domestic companies are also promoting research and development and business on recycled yarn. The chemical and thermal properties of four types of virgin and recycled PET samples from A and B company, which are the leading domestic companies in the recycled polyester yarn business, were confirmed through infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC). Virgin and recycled PET from two companies were compared. FT-IR spectroscopy revealed the typical spectra of PET for both companies and a different peak at 872 cm-1. DSC confirmed that the melting point and crystallization temperature of recycled PET were lower than those of virgin PET. These results indicate that small amounts of contaminants are an important parameter affecting the thermal properties of recycled PET. In the DSC results after seven repeats of the heating and cooling processes, all four samples showed that a lower melting point, crystallization temperature, and low heat flow intensity increased with increasing number of cycles. The results of melting and crystallization enthalpy also showed similar patterns.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.109-116
• /
• 2021

In order to replace mineral aggregate used as road pavement materials with steel slag aggregate, this present study evaluated mechanical properties of SMA Concrete mixtures using steel slag aggregate as oxidized slag from electric furnace in iron works. The variables of this experiment are the aggregate type of mineral and steel slag and the sieve sized of 10mm and 13mm. The physical properties inclu ding the specific gravity and absorption rate etc. of the slag aggregate mixtu res satisfied the KS standard as asphalt mixtu re. As a resu lt of evalu ating the mechanical properties of the asphalt mixtures, the optimum asphalt content of the slag aggregate mixtures were lower than that of the mineral aggregate mixtures, but other quality standards were all satisfied. In the deformation strength evaluation, the slag aggregate mixtures were measu red slightly higher than that of the mineral aggregate mixtu res, and the dynamic stability test satisfied the 2,000pass/mm standard value in all specimens. And, the moduli of resilient of the slag aggregate mixtures showed an improved value compared with the mineral aggregate mixtures. Therefore, as the resilient rate of the slag aggregate mixtures improved, it is speculated that there will be an effect of improving public performance according to the repeated traffic load of the vehicle.

• Geomechanics and Engineering
• /
• v.24 no.3
• /
• pp.215-226
• /
• 2021

To study the evolution mechanism of cracks in rocks with multiple defects, rock-like samples with multiple defects, such as strip-shaped through-going cracks and cavity groups, are used, and the crack propagation law and changes in AE (acoustic emission) and strain of cavity groups under different inclination angles are studied. According to the test results, an increase in the cavity group inclination angle can facilitate the initial damage degree of the rock and weaken the crack initiation stress; the initial crack initiation direction is approximately 90°, and the extension angle is approximately 75~90° from the strip-shaped through-going cracks; thus, the relationship between crack development and cavity group initiation strengthens. The specific performance is as follows: when the initiation angle is 30°, the cracks between the cavities in the cavity group develop relatively independently along the parallel direction of the external load; when the angle is 75°, the cracks between the cavities in the cavity group can interpenetrate, and slip can occur along the inclination of the cavity group under the action of the shear mechanism rupture. With the increase in the inclination angle of the cavity group, the AE energy fluctuation frequency at the peak stress increases, and the stress drop is obvious. The larger the cavity group inclination angle is, the more obvious the energy accumulation and the more severe the rock damage; when the cavity group angle is 30° or 75°, the peak strain of the local area below the strip-shaped through-going fracture plane is approximately three times that when the cavity group angle is 45° and 60°, indicating that cracks are easily generated in the local area monitored by the strain gauge at this angle, and the further development of the cracks weakens the strength of the rock, thereby increasing the probability of major engineering quality damage. The research results will have important reference value for hazard prevention in underground engineering projects through rock with natural and artificial defects, including tunnels and air-raid shelters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.643-650
• /
• 2021

The purpose of this study was to evaluate the impact of lecture content on the overall academic satisfaction in non-contact online classes. The study was conducted using an online survey of 107 university students attending metropolitan, local and foreign universities for a week from August 25th, 2020 to September 2nd, 2020. The analysis methods used included descriptive statistics and chi-square distribution, Fisher's exact test, linear by linear association, and logistic regression. The result of the study showed a significant decrease in Junior by 0.025 times compared to Senior (p<.05). Furthermore, a significant decrease in the impact of recorded lectures by 0.036 times compared to a hybrid of face-to-face and online lectures (p<.05). Compared to the response 'No', the number of student's responses of 'Yes' increased significantly by 31.358 times (p<.05). Additionally, a significant increase was seen in teaching methods by 19.709 times, and academic satisfaction by 7.989 times(p<.05). In conclusion, the results imply that the quality of lecture content is also important to improve the student's satisfaction with school life, but overall management is required in the areas of appropriate teaching methods, appropriate tuition, and evaluation methods.

• Journal of the Korea Convergence Society
• /
• v.12 no.2
• /
• pp.95-101
• /
• 2021

The purpose of this study was to investigate the convergence effect of focal vibration stimulation and bilateral upper limb training on the recovery of upper limb function when applied to stroke patients. For 20 stroke patients, divided into an experimental group that performed convergence intervention with focal vibration stimulation and bilateral upper limb training, and a control group who performed only bilateral upper limb training. It was conducted 20 times for 4 weeks, 30 minutes per session. Vibration stimulation was applied to the affected side of the experimental group for 30 minutes during training. Results were measured for the degree of recovery of the affected upper limb function, amount of use on the affected and unaffected sides, the quality and satisfaction in performance on use of both upper limbs. Comparisons were made within groups using a paired-sample t-test and between groups using covariance analysis. As a result of the study, the experimental group showed a significant difference in dexterity and the amount of use on the affected than the control group. The effect size was more than the small effect size in all evaluation items. Through this study, it is thought that the convergence intervention of focal vibration stimulation and bilateral upper limb trainingcan be used clinically as an effective intervention for the recovery of arm function in stroke patients.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.1
• /
• pp.203-217
• /
• 2021

Purpose: The purpose of this meta-analysis was to examine the high-level evidence of the effects of manual therapy on musculoskeletal diseases. Methods: Domestic databases were searched for studies that conducted clinical trials associated with manual therapy on chronic musculoskeletal diseases. A total of 591 studies published between 2005 and 2018 were identified, with 18 studies satisfying the inclusion data. The studies were classified according to patient, intervention, comparison, and outcome (PICO). The search outcomes were items associated with pain and physical function. The 18 studies included in the study were evaluated by using the R meta-analysis (version 4.0). The quality of 18 randomized control trials was evaluated by using the Cochrane risk of bias (ROB). The effect sizes were computed as the corrected standardized mean difference (SMD). Subgroup and meta-regression analyses were also used. Egger's regression test was carried out in order to analyze the publication bias. Cumulative meta-analysis and sensitivity analysis were also conducted in order to analyze the data error. Results: The following factors showed the large effect size of manual therapy on chronic musculoskeletal diseases: pain (Hedges's g = 2.66; 95% CI = 1.47 ~ 3.85), and physical function (Hedges's g = 2.15; 95% CI: 1.22 ~ 3.08). The subgroup analysis only showed a statistical difference in the type of manual therapy (pain) and outcome (physical function). No statistically significant difference was found in the meta-regression analysis. Publication bias was found in the data, but the results of the trim-and-fill method showed that such bias did not largely affect the obtained data. Furthermore, there were no data errors in the cumulative meta-analysis and sensitivity analysis. Conclusion: This study provides evidence for the effectiveness of manual therapy on chronic musculoskeletal diseases in pain and physical function. Subgroup analysis suggests that only the type of manual therapy for pain and the type of outcome for physical function differed in effect size.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.34-45
• /
• 2021

Weather is one of the important factors in the agricultural industry as it affects the price, production, and quality of crops. Upland crops are directly exposed to the natural environment because they are mainly grown in mountainous areas. Therefore, it is necessary to provide accurate weather for upland crops. This study examined the effectiveness of 12 forest soil factors to interpolate the weather in mountainous areas. The daily temperature and precipitation were collected by the Korea Meteorological Administration between January 2009 and December 2018. The Generalized Additive Model (GAM), Kriging, and Random Forest (RF) were considered to interpolate. For evaluating the interpolation performance, automatic weather stations were used as training data and automated synoptic observing systems were used as test data for cross-validation. Unfortunately, the forest soil factors were not significant to interpolate the weather in the mountainous areas. GAM with only geography aspects showed that it can interpolate well in terms of root mean squared error and mean absolute error. The significance of the factors was tested at the 5% significance level in GAM, and the climate zone code (CLZN_CD) and soil water code B (SIBFLR_LAR) were identified as relatively important factors. It has shown that CLZN_CD could help to interpolate the daily average and minimum daily temperature for upland crops.

• Journal of the Korean earth science society
• /
• v.42 no.1
• /
• pp.76-87
• /
• 2021

In this study, temporal trend of researches in earthquake with groundwater level, water quality, radon, remote sensing, electrical resistivity, gravity, and geomagnetism was searched from 2001 to 2020, using the journals indexed in Web of Science, and the number of articles published in international journals was counted in relation to the occurrences of earthquakes (≥Mw 5.0, ≥Mw 6.0, ≥Mw 7.0, ≥Mw 8.0, and ≥Mw 9.0). The number of articles shows an increasing trend over the studied period. This is explained by that studies on earthquake precursor and seismic monitoring becomes active in various fields with integrated data analysis through the development of remote sensing technology, progress of measurement equipment, and big data. According to Mann-Kendall and Sen's tests, gravity-related articles exhibit an increasing trend of 1.30 articles/yr, radon-related articles (0.60 articles/yr), groundwater-related articles (0.70 articles/yr), electrical resistivity-related articles (0.25 articles/yr), and remote-sensing-related articles (0.67 articles/yr). By cross-correlation analysis of the number of articles in each field with removing trend effect and the number of earthquakes of ≥Mw 5.0, ≥Mw 6.0, ≥Mw 7.0, ≥Mw 8.0, and ≥Mw 9.0, radon and remote sensing fields exhibit a high cross-correlation with a delay time of one year. In addition, large-scale earthquakes such as the 2004 and 2005 Sumatra earthquake, the 2008 Sichuan earthquake, the 2010 Haiti earthquake, and the 2010 Chile earthquake are estimated to be related with the increase in the number of articles in the corresponding periods.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.6
• /
• pp.271-279
• /
• 2020

Non-ferrous metals, widely used in the mechanical industry, are difficult to machine, particularly by drilling and tapping. Since non-ferrous metals have a strong tendency to adhere to the cutting tool, the tool life is greatly deteriorated. Diamond-like carbon (DLC) is one of the promising candidates to improve the performance and life of cutting tool due to their low frictional property. In this study, a sacrificial DLC layer is applied on the hard nitride coated drill tool to improve the durability. The DLC coatings are fabricated by controlling the acceleration voltage of the linear ion source in the range of 0.6~1.8 kV. As a result, the optimized hardness(20 GPa) and wear resistance(1.4 x 10-8 ㎣/N·m) were obtained at the 1.4 kV. Then, the optimized DLC coating is applied as an sacrificial layer on the hard nitride coating to evaluate the performance and life of cutting tool. The Vickers hardness of the composite coatings were similar to those of the nitride coatings (AlCrN, AlTiSiN), but the friction coefficients were significantly reduced to 0.13 compared to 0.63 of nitride coatings. The drilling test were performed on S55C plate using a drilling machine at rotation speed of 2,500 rpm and penetration rate of 0.25 m/rev. The result showed that the wear width of the composite coated drills were 200 % lower than those of the AlCrN, AlTiSiN coated drills. In addition, the cutting forces of the composite coated drills were 13 and 15 % lower than that of AlCrN, AlTiSiN coated drills, respectively, as it reduced the aluminum clogging. Finally, the application of the DLC sacrificial layer prevents initial chipping through its low friction property and improves drilling quality with efficient chip removal.

• Tuberculosis and Respiratory Diseases
• /
• v.84 no.2
• /
• pp.96-104
• /
• 2021

Background: Many chronic obstructive pulmonary disease (COPD) patients receiving monotherapy continue to experience symptoms, exacerbations and poor quality of life. This study aimed to assess the efficacy and safety of direct switch from once-daily tiotropium (TIO) 18 ㎍ to indacaterol/glycopyrronium (IND/GLY) 110/50 ㎍ once daily in COPD patients in Korea. Methods: This was a randomized, open-label, parallel group, 12-week trial in mild-to-moderate COPD patients who received TIO 18 ㎍ once daily for ≥12 weeks prior to study initiation. Patients aged ≥40 years, with predicted post-bronchodilator forced expiratory volume in 1 second (FEV₁) ≥50%, post-bronchodilator FEV₁/forced vital capacity <0.7 and smoking history of ≥10 pack-years were included. Eligible patients were randomized in a 1:1 ratio to either IND/GLY or TIO. The primary objective was to demonstrate superiority of IND/GLY over TIO in pre-dose trough FEV₁ at week 12. Secondary endpoints included transition dyspnea index (TDI) focal score, COPD assessment test (CAT) total score, and rescue medication use following the 12-week treatment, and safety assessment. Results: Of the 442 patients screened, 379 were randomized and 347 completed the study. IND/GLY demonstrated superiority in pre-dose trough FEV₁ versus TIO at week 12 (least squares mean treatment difference [Δ], 50 mL; p=0.013). Also, numerical improvements were observed with IND/GLY in the TDI focal score (Δ, 0.31), CAT total score (Δ, -0.81), and rescue medication use (Δ, -0.09 puffs/day). Both treatments were well tolerated by patients. Conclusion: A direct switch from TIO to IND/GLY provided improvements in lung function and other patient-reported outcomes with an acceptable safety profile in patients with mild-to-moderate airflow limitation.