Browse > Article
http://dx.doi.org/10.5695/JKISE.2020.53.6.271

A Study on the Improvement of Tool's Life by Applying DLC Sacrificial Layer on Nitride Hard Coated Drill Tools  

Kang, Yong-Jin (Surface Technology Division, Korea Institute of Materials Science(KIMS))
Kim, Do Hyun (Surface Technology Division, Korea Institute of Materials Science(KIMS))
Jang, Young-Jun (Surface Technology Division, Korea Institute of Materials Science(KIMS))
Kim, Jongkuk (Surface Technology Division, Korea Institute of Materials Science(KIMS))
Publication Information
Journal of the Korean institute of surface engineering / v.53, no.6, 2020 , pp. 271-279 More about this Journal
Abstract
Non-ferrous metals, widely used in the mechanical industry, are difficult to machine, particularly by drilling and tapping. Since non-ferrous metals have a strong tendency to adhere to the cutting tool, the tool life is greatly deteriorated. Diamond-like carbon (DLC) is one of the promising candidates to improve the performance and life of cutting tool due to their low frictional property. In this study, a sacrificial DLC layer is applied on the hard nitride coated drill tool to improve the durability. The DLC coatings are fabricated by controlling the acceleration voltage of the linear ion source in the range of 0.6~1.8 kV. As a result, the optimized hardness(20 GPa) and wear resistance(1.4 x 10-8 ㎣/N·m) were obtained at the 1.4 kV. Then, the optimized DLC coating is applied as an sacrificial layer on the hard nitride coating to evaluate the performance and life of cutting tool. The Vickers hardness of the composite coatings were similar to those of the nitride coatings (AlCrN, AlTiSiN), but the friction coefficients were significantly reduced to 0.13 compared to 0.63 of nitride coatings. The drilling test were performed on S55C plate using a drilling machine at rotation speed of 2,500 rpm and penetration rate of 0.25 m/rev. The result showed that the wear width of the composite coated drills were 200 % lower than those of the AlCrN, AlTiSiN coated drills. In addition, the cutting forces of the composite coated drills were 13 and 15 % lower than that of AlCrN, AlTiSiN coated drills, respectively, as it reduced the aluminum clogging. Finally, the application of the DLC sacrificial layer prevents initial chipping through its low friction property and improves drilling quality with efficient chip removal.
Keywords
Drill tool; sacrificial layer; Ion Source; DLC; Tribology;
Citations & Related Records
연도 인용수 순위
  • Reference
1 L. Settineri, M.G. Faga, G. Gautier, M. Perucca, Evaluation of wear resistance of AlSiTiN and AlSiCrN nanocomposite coatings for cutting tools, CIRP Ann. Manuf. Technol. 57 (2008) 575-578.   DOI
2 S. Carvalhoa, N.M.G. Parreira, M.Z. Silva, A. Cavaleiro, L. Rebouta, In-service behaviour of (Ti,Si,Al)Nx nanocomposite films. Wear. 247 (2012) 68-74.
3 A. A. Voevodin, J. S. Zabinski, C. Muratore, Recent advances in hard, tough and low friction nanocomposite coatings, Tsinghua Sci. Technol. 10 (2005) 665-679.   DOI
4 J. Vetter,. 60 years of DLC coatings : Historical highlights and technical review of cathodic arc processes to synthesize various DLC types, and their evolution for industrial applications, Surf. Coat. Technol. 257 (2014) 213-240.   DOI
5 D. Zhang, B. Shen, F. Sun, Study on tirbological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates, Appl. Surf. Sci. 256 (2010) 2479-2489.   DOI
6 A. Erdemir, Christophe Donnet, Tribology of diamond-like carbon films: recent progress and future prospects, J. Phys. D: Appl. Phys. 39 (2006) 311-327.   DOI
7 J. Robertson, Properties of diamond-like carbon, Surf. Coat. Technol. 50 (1992) 185-203.   DOI
8 J. Robertson, Deposition mechanism for promoting sp3 bonding in diamond-like carbon, Diamond Relat. Mater. 2 (1993) 984-989.   DOI
9 S. Meskinis, V. Kopustinskas, A. Tamuleviciene, S. Tamulevicius, G. Niaura, J. Jankauskas, R. Gudaitis, Ion beam energy effects on structure and properties of diamond like carbon films deposited by closed drift ion source, Vacuum. 84 (2010) 1133-1137.   DOI
10 Y. Denga, W. Chena, B. Lia, Y. Lia, Physical vapor deposition technology for coated cutting tools: A review, Ceram. Int., 46 (2020) 183733-18390.
11 K. D. Bouzakis, N. Michailidis, G. Skordaris, R. M'Saoubi, Cutting with coated tools: coating technologies, characterization methods and performance optimization, CIRP Ann. Manuf. Technol. 61 (2012) 703-723.   DOI
12 W. R. Kim, C. J. Uoo, H. H. Jo, M. S. Park, W.S. Chung, J. Kor. Inst. Surf. Eng. 42 (2009).
13 A. C. Ferrari, J. Robertson., Raman spectroscopy of amorphous, nanostructured, diamond-like carbon, and nanodiamond, R. Soc. Lond. 362 (2004) 2477-2512.
14 S. Kataria. Sandip Dhara, Harish C. Barshilia, S. Dash, A. K. Tyagi., Evolution of coefficient of friction with deposition temperature in diamond like carbon thin films, J. Appl. Phys. 112 (2012) 023525.   DOI
15 J. Robertson, Diamond-like amorphous carbon, Mater. Sci. Eng. 37 (2002) 129-218.   DOI
16 Y. Lifshitz, Diamond-like carbon-present status, Diamond. Relat. Mater. 8 (1999) 1659-1676.   DOI
17 X.L. Peng, Z.H. Barber, T.W. Clyne., Surface roughness of diamond-like carbon films prepared using various techniques, Surf. Coat. Technol. 138 (2001) 23-32.   DOI
18 A.E. Reiter, V.H. Derflinger, B. Hanselmann, T. Bachmann, B. Sartory., Investigation of the properties of Al1xCrxN coatings prepared by cathodic arc evaporation, Surf. Coat. Technol. 200 (2005) 2114-2122.   DOI