• Laser Solutions
• /
• v.2 no.3
• /
• pp.19-31
• /
• 1999

This paper introduces the monitoring scheme of laser welding quality using neural network. The developed monitoring scheme detects light signal emitting from plasma formed above the weld pool with optic sensor and DSP-based signal processor, and analyzes to give a guidance about the weld quality. It can automatically detect defects of laser weld and further give an information about what kind of defects it is, specially partial penetration and porosity among the interior defects. Those could be detected only by naked eyes or X-ray after welding, which needs more processes and costs in mass production. The monitoring scheme extracts four feature vectors from signal processing results of optical measuring data. In order to classify pattern for extracted feature vectors and to decide defects, it uses single-layer neural network with perceptron learning. The monitoring result using only the first feature vector shows confidence rate in recognition of 90%($\pm$5) and decides whether normal status or defects status in real time.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.351-352
• /
• 2006

The objective criterion is necessary to decide the signal for vehicle audio. In this time, the signals have decided by golden ear or some simple parameters. In this paper, we propose the system for sound quality assessment in the vehicle audio signals. The vehicle audio signals were recorded in many vehicles by same condition. From these signals, objective and subjective parameters were extracted and using these signals listening test was done. The function was estimated between three results by simple neural network system. The score of arbitrary signal can be estimated using the function made by three results. In this way, Sound signal quality is assessed objectively.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2480-2482
• /
• 1998

In this paper, the implementation of dual rate ADPCM using G.723 16Kbps and 40Kbps speech codec algorithm is handled. For small signals, the low rate 16Kbps coding algorithm shows the same SNR as the high rate 40Kbps coding algorithm, while the low rate 16Kbps coding algorithm shows the lower SNR than the high rate 40Kbps coding algorithm for large signal. To obtain the good trade-off between the data rate and synthesized speech quality, we applied low rate 16Kbps for the small signal and high rate 40Kbps for the large signal. Various threshold values determining the rate are tested for good trade off data rate and speech quality. Also the low pass filter effect of speech input and output devices is simulated at several cut-off frequencies. To simulation result shows the good speech quality at a low rate comparing with 16Kbps & 40Kbps.

• Smart Structures and Systems
• /
• v.1 no.2
• /
• pp.121-140
• /
• 2005

This paper presents a systematic investigation of the effect of sensor location on the data quality and subsequently, on the effectiveness of machine health monitoring. Based on an analysis of the signal propagation process from the defect location to the sensor, numerical simulations using finite element modeling were conducted on a bearing test bed to determine the signal strength at several representative sensor locations. The results showed that placing sensors closely to the machine component being monitored is critical to achieving high signal-to-noise ratio, thus improving the data quality. Using millimeter-sized piezoceramic plates, the obtained results were evaluated experimentally. A comparison with a set of commercial vibration sensors verified the developed structural dynamics-based sensor placement strategy. It further demonstrated that the proposed shock wave-based sensing technique provided an effective alternative to vibration measurement, while requiring less space for sensor installation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.39
• /
• pp.243-254
• /
• 1996

In this study, a model and an analysis method for parameter design is presented a linear relation between the input signal and the ideal value of a performance characteristic. Furthermore, There presented a new performance measure, expected quality loss after adjustment, which is proved to be equivalent to Taguchi's SN ratio approximately. On the basis of this, a two-step optimization procedure is proposed for parameter design considering the signal factor and the quality characteristics with continuous variable. Proposed procedure and Taguchi two-stage procedure are compared.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.216-218
• /
• 2005

This paper present a new approach to a noise robust recognizer for WPS interface. In noisy environments, performance of speech recognition is decreased rapidly. To solve this problem, We propose the recognition system using vocal-cord signal instead of speech. Vocal-cord signal has low quality but it is more robust to environment noise than speech signal. As a result, we obtained 75.21% accuracy using MFCC with CMS and 83.72% accuracy using ZCPA with RASTA.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1985.10a
• /
• pp.79-86
• /
• 1985

Residual-ecited linear prediction vocoding is known to be one of the best approaches to speech coding in the range of 4.8 to 9.6 kbits/s. One problem associated with the RELP vocoder is that it often produces some roughness and tonal noise as the transmission rate becomes lower. In this paper, we investigate three methods to improve its quality. These include the multiband spectral folding method, the method of using both the spectrally folded signal and the pulsed ecitation signal, and the method of using both the multiband spectrally folded signal and the pulsed ecitation signal. It has been found that, among the three methods, the last one yields the best performance. It produces no roughness and little tonal noise.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.2
• /
• pp.84-92
• /
• 2004

A process control procedure is proposed when 100% inspection is performed in a process with excellent capability. Only the incomplete measurement data is assumed to be available, i.e. the specific measurement value of the quality characteristic is not available for each item but it can be determined to be smaller or larger than any prescribed value. In the suggested model, a signal limit is introduced to determine whether the process under study is in control or not. If the quality characteristic of an incoming item exceeds the upper signal or the lower signal limit, the process is determined to be stopped or not by comparing the number of consecutively accepted items with a predetermined threshold number. The procedure is designed based on the type I and II errors. The performance of the model is evaluated by the expected number of items produced under the in-control and out-of-control states until the process is stopped.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.7
• /
• pp.17-22
• /
• 2011

To propose effective signaling scheme for inductive coupling link, inductive coupling channel and signaling schemes are analyzed. For fair comparison of various signaling schemes, a signal quality factor ($Q_{signal}$) is introduced and the NRZ signal scheme shows better signal quality factor than BPM signaling schemes. For simulation, the transmitter for inductive coupling link is designed with 0.13 ${\mu}m$ CMOS process and the inductor is modeled as spiral inductor in chip.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2126-2130
• /
• 2003

In the integrated systems, that is integrated digital TV(DTV) internet and home automation, like home server, is needed integration of digital TV video signal and computer graphic signal. The graphic signal is operating at the high speed and has time-divide-stream. So the re-request of data is not easy at the time of error detection. therefore EDAC algorithm is efficient. In this paper, we show a scheme, that is integration of graphic and dtv format signal for DTV monitor display. This paper also presents the efficiency error detection auto correction(EDAC) for conversion of graphics signal to DTV video signal. A presented EDAC algorithms use the modified hamming code for enhancing video quality and reliability. A EDAC algorithm of this paper can detect single error, double error, triple error and more error for preventing from incorrect correction. And it is not necessary an additional memory. In this paper The comparison between digital TV video signal and graphic signal, a EDAC algorithm and a design of conversion graphic signal to DTV signal with EDAC function in DTV system is described.