• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.4
• /
• pp.259-268
• /
• 2019

One of the most effective methods to consistently ensure the safety of a tap water supply can be achieved by application of a comprehensive risk assessment and risk management approach for drinking water supply systems. This approach can be termed water safety plans(WSP) which recommended by WHO(world health organization) and IWA(international water association). For the introduction of WSP into Korea, 150 hazards were identified all steps in drinking water supply from catchment to consumer and risk assessment tool based on frequency and consequence of hazards were developed. Then, developed risk assessment tool by this research was implemented at a water treatment plant($Q=25,000m^3/d$) to verify its applicability, and several amendments were recommended; classification of water source should be changed from groundwater to stream to strengthen water quality monitoring contaminants and frequencies; installation of aquarium to monitor intrusion of toxic substances into raw water; relocation or new installation on-line water quality analyzers for efficient water quality monitoring; change of chlorination chemical from solid phase($Ca(OCl)_2$) to liquid phase(NaOCl) to improve soundness of chlorination. It was also meaningful to propose hazards and risk assessment tool appropriate for Korea drinking water supply systems through this research which has been inconsistent among water treatment authorities.

• Journal of Korean Society for Quality Management
• /
• v.44 no.4
• /
• pp.845-853
• /
• 2016

Purpose: This research is to find the general and somewhat prevailing problems in quality circle papers. Many quality circles try to benchmark awarded papers even though they may have common problems. By pointing out popular problems in papers, many quality circles hopefully could be guided to the right direction in working out improvement actions. Methods: Many papers awarded in national quality circle conferences are deeply analyzed to figure out common problems. 69 recent papers are analyzed step by step and the most important and frequently occurring problems in each step are indicated. Results: Many prevailing problems are found in each step of QC stories. Especially finding themes, Grasping status quo, Cause analysis, Setting targets, Development of and Implementing counter attacks are the most common areas that have problems. Conclusion: Some problems are already too popular to be recognized as problems. In this paper those problems are logically criticized and thereby right directions for future quality circle activities are proposed.

• Journal of Environmental Health Sciences
• /
• v.45 no.1
• /
• pp.42-53
• /
• 2019

Objectives: The Yongpung reservoir in Korea is a crucial facility that supplies water to farms in its surrounding $2km^2$ area. However, its water quality is not suited to the needs of current residents who wish for the availability of environmentally friendly agricultural products and desire to use the waterfront area. The aim of this research was to evaluate the reservoir's fish and benthic macroinvertebrate distributions and determine its water quality and the heavy metal content in its sediment. This basic data can be used to establish environmentally protective plans for the Yongpung reservoir. Methods: Six sites were selected for analysis in this investigation. Three points (YP-1, YP-2, and YP-3) were evaluated for water quality and metal content in sediments; they were located upstream, midstream, and downstream of the reservoir. Samplings of the fish and benthic macroinvertebrate populations were performed at three other sites: St. 1, St. 2, and St. 3. Results: Based on chemical oxygen demand (COD) and total nitrogen (T-N) data, the quality of the Yongpung reservoir water corresponds to Class VI (very poor) according to Korea's lake environmental standards. The lead levels measured in the sediment at the midstream and downstream points of the reservoir were 76.7 and 72.7 mg/kg, respectively, while 8 orders, 15 families, and 16 species of benthic macroinvertebrates were identified in the reservoir. The ecological score of the benthic macroinvertebrate community (ESB) was between 8 and 23, denoting poor to very poor environmental conditions. Further, 4 families and 7 species of fish were identified in the reservoir, with Cyprinidae accounting for 94.3% of all observed freshwater fish. Conclusion: Based on these findings, we conclude that management plans, including the removal of lead from the sediment, are necessary to improve the quality of the agricultural water in this reservoir. The T. japonica, which cover almost 30% of the water area, must also be removed.

• Journal of Korean Society for Quality Management
• /
• v.28 no.1
• /
• pp.196-209
• /
• 2000

In order to intensify an enterprise competition, quality inspection controls are very important issue. An organization or division of a company hopes which to acquire the quality inspection information be updated in real-time with respect to shop floor. In this paper, we develop a quality inspection control system for a Turbine/Generator production industry. The system compromises inspection scheduling module related to shop floor control (SFC) system, formal documentation control module, and formal inspection control module. In the quality inspection control system, ORACLE RDBMS is used for the database management system and ORACLE DEVELOPER 2000 is used for system development tool. The characteristic of this system is to support so it can enhance productivity and quality through inspection plans related to production scheduling.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.2
• /
• pp.56-67
• /
• 1999

This study was performed to suggest the basic data and plans for the establishment of safe water supply plans in simple water supply piped system in the rural areas. In 4 different places, 24 points of water sources 36 points of taps from water sources were sampled. Of the whole 60 points, 55 points were ground water and 5 points were surface water. 14 items were measured for the analysis of water quality on each samples. The measured items were analyzed again by statistical method ; cluster analysis and principle components analysis. The results of this study are as followed. 1) In water quality analysis on water sources, 4 items, bacteria, E.coli, NH3-N and Fe exceed the standard. Of 24 points, 20 points(83%) on bacteria, 1 point(4%) on NH3-N and Fe exceed the standard. 2) In water quality analysis on near and remote taps, 4 items, bacteria, E.coli, NH3-N and Fe , exceed the standard. Of 36 points, 20 points (81%) on bactria, 1 pint(3%) on NH3-N and Fe exceed the standard. 3)Cluster analysis on water quality shows the differences by the kinds of water sources, geographical characteristics and distance from water sources. 4) Principle components analysis on ground water shows that Factor 1 and Factor 3 are natural fluctuation by the content of soil. Also, Factor 2 and Factor 4 are penetration of pollutants to underground. Therefore, it is needed to take deeper ground water in order to prevent from pollution in the areas which have ground water as water source . 5) Principle components analysis on surface water shows that Factor 1 is penetration of vacteria from surface to water source when rainfalls. Also, Factor 2 is fluctuation of water quality by the geographical characteristics. Therefore, the counterplans against non-point pollution source must be taken. Filtration and disinfection facilities are needed in the areas which have surface water as water source.

• Progress in Medical Physics
• /
• v.29 no.4
• /
• pp.106-114
• /
• 2018

This study aimed to compare the performance of previous optimization algorithms against new a photon optimizer (PO) algorithm for intensity-modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT) plans for prostate cancer. Eighteen patients with prostate cancer were retrospectively selected and planned to receive 78 Gy in 39 fractions of the planning target volume (PTV). All plans for each patient optimized with the dose volume optimizer (DVO) and progressive resolution optimizer (PRO) algorithms for IMRT and VMAT were compared against plans optimized with the PO within Eclipse version 13.7. No interactive action was performed during optimization. Dosimetric and radiobiological indices for the PTV and organs at risk were analyzed. The monitor units (MU) per plan were recorded. Based on the plan quality for the target coverage, prostate IMRT and VMAT plans using the PO showed an improvement over DVO and PRO. In addition, the PO generally showed improvement in the tumor control probability for the PTV and normal tissue control probability for the rectum. From a technical perspective, the PO generated IMRT treatment plans with fewer MUs than DVO, whereas it produced slightly more MUs in the VMAT plan, compared with PRO. The PO showed over potentiality of DVO and PRO whenever available, although it led to more MUs in VMAT than PRO. Therefore, the PO has become the preferred choice for planning prostate IMRT and VMAT at our institution.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.22 no.5
• /
• pp.45-56
• /
• 2019

Urban green areas are generally composed of relatively small and fragmented patches, but it is a critical factor for the quality of an urban environment. They have positive effects such as increasing green connectivity, reducing runoff, and mitigating urban heat. But, there is a lack of urban greening plans that consider the comprehensive effects of green space in real urban areas. To fill this gap in this literature, this study identifies a planning model that determines the optimal locations for maximizing green areas' multiple effects(e.g., heat mitigation and enhancement of connectivity) by using unused lots. This model also considers minimizing costs using meta-heuristic optimization algorithms. As a results, we finds 50 optimal plans that considers two effects within the limited cost in Nowon-gu. The optimal plans show the trade-off effect between connectivity, heat mitigation and cost. They also show the critical unused land lots for urban greening that are commonly selected in various plans. These optimal plans can effectively inform quantitative effectiveness of green space and their trade-off. We expect that our model will contribute to the improvement of green planning processes in reality.

• Journal of Korean Institute of Industrial Engineers
• /
• v.11 no.2
• /
• pp.11-18
• /
• 1985

Three types of warranty policies are considered. They are (1) free warranty policy for repairable products, (2) free warranty policy for nonrepairable products, and (3) rebate warranty policy. Under each warranty policy, a single sampling attribute plan with non-destructive testing is considered. A sampling plan is characterized by the sample size and the acceptance number. For each case, characteristics of an optimum sampling plan are discussed and determined, which minimize the warranty cost and the corresponding quality control cost within the assigned producer's risk and consumer's risk.

• Communications for Statistical Applications and Methods
• /
• v.3 no.2
• /
• pp.151-159
• /
• 1996

The general formulas of average fraction inspected, average sample number and average outgoing quality in n-level skip-lot sampling plan are derived. Average sample number and average outgoing quality of a reference plan, three-level, five-level and ten-level skip-lot sampling plans are compared.

• Journal of Korean Society for Quality Management
• /
• v.14 no.2
• /
• pp.40-46
• /
• 1986

The decision maker has the job of torecasting capital investments and operating expenses to aid the decision making in choosing and evaluating present and future alternatives. The estimating function eventually analysis, evaluates and choose the alternatives. The analysis stemmed originally from a preliminary design of some sort, and eventually plans are started to investigate investment possibilites. This study provide the descounted cash flow and the present worth method. Despite any choice of an analytical method, there remains the problem of predicting certain future events. Therefore, these models dealing with optimum plant sizing, equipment replacement, and lease or buy will be discussed.