• Journal of Broadcast Engineering
• /
• v.5 no.2
• /
• pp.247-259
• /
• 2000

This paper introduces a new technique that reduces the search times and Improves the accuracy of motion estimation using high temporal and spatial correlation of motion vector. Instead of using the fixed first search Point of previously proposed search algorithms, the proposed method finds more accurate first search point as to compensating searching area using high temporal and spatial correlation of motion vector. Therefore, the main idea of proposed method is to find first search point to improve the performance of motion estimation and reduce the search times. The proposed method utilizes the direction of the same coordinate block of the previous frame compared with a block of the current frame to use temporal correlation and the direction of the adjacent blocks of the current frame to use spatial correlation. Based on these directions, we compute the first search point. We search the motion vector in the middle of computed first search point with two fixed search patterns. Using that idea, an efficient adaptive predicted direction search algorithm (APDSA) for block matching motion estimation is proposed. In the experimental results show that the PSNR values are improved up to the 3.6dB as depend on the Image sequences and advanced about 1.7dB on an average. The results of the comparison show that the performance of the proposed APDSA algorithm is better than those of other fast search algorithms whether the image sequence contains fast or slow motion, and is similar to the performance of the FS (Full Search) algorithm. Simulation results also show that the performance of the APDSA scheme gives better subjective picture quality than the other fast search algorithms and is closer to that of the FS algorithm.

• Progress in Medical Physics
• /
• v.17 no.3
• /
• pp.131-135
• /
• 2006

A commercial ion chamber matrix was examined the characteristics and its performance for radiotherapy qualify assurance. The device was the I'mRT 2D-MatriXX (Scanditronix-Wellhofer, Schwarzenbruck, Germany). The 2D-MatriXX device consists of a 1020 vented ion chamber array, arranged in $24{\times}24cm^2$ matrix. Each ion chamber has a volume of $0.08cm^3$, spacing of 0.762 cm and minimum sampling time of 20 ms. For the investigation of the characteristics, dose linearity, output factor, short-term reproducibility and dose rate dependency were tested. In the testing of dose linearity. It has shown a good signal linearity within 1% in the range of $1{\sim}800$cGy. Dose rate dependency was found to be lower than 0.4% (Range: 100-600 Mu/min) relative to a dose rate of 300 Mu/min as a reference. Output factors matched very well within 0.5% compared with commissioned beam data using a ionization chamber (CC01, Scanditronix-Wellhofer, Schwarzenbruck, Germany) in the range of field sizes $3{\times}3{\sim}24{\times}24cm^2$. Short-term reproducibility (6 times with a interval of 15 minute) was also shown a good agreement within 0.5%, when the temperature and the pressure were corrected by each time of measurement. in addition, we compared enhanced dynamic wedge (EDW, Varian, Palo Alto, USA) profiles from calculated values in the radiation planning system with those from measurements of the MatriXX. Furthermore, anon-uniform IMRT dose fluence was tested. All the comparison studies have shown good agreements. In this study, the MatriXX was evaluated as a reliable dosimeter, and it could be used as a simplistic and convenient tool for radiotherapy qualify assurance.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.3
• /
• pp.175-194
• /
• 2014

This study attempts to identify the spatial distributions of Achnanthes convergens, and elucidate the environmental factors that affect the Periphyton diatom habitat. Data in 250 points of Nakdong river basin are collected between April(primary) and September(secondary) 2012, with the National Institute of Environmental Research's support. We define "clean area" over 10% of Achnanthes convergens appearance, and the others as "non-clean areas". Spatial statistics of Kriging, Hotspot, LISA are used in this study. Results show that 1) 56 points are identified as clean areas in the primary survey, while 41 points are discovered in the following survey; 2) using water quality variables, density of turbidity(clean $101.83{\mu}s/cm$; non-clean $598.48{\mu}s/cm$) and conductivity(clean 1.95 NTU; nonclear 5.58 NTU) are five-fold lower in clean-areas; 3) Habitat and Riparian Factors in Nakdong basin illustrate that natural sand bar, diversity of velocity, sediment condition, levee material, riverside land affect Achnanthes convergens; 4) Hotspots of Achnanthes convergens are located in watersheds, including upper Andong Dam, upper Imha dam, Wi-cheon, Miryang river, Nam river and Hwang river whereas mainstream/downstream of Nakdong river and Keumho river watershed are shown as coldspots.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.12
• /
• pp.1949-1957
• /
• 2013

The contents of ${\beta}$-carotene and retinol in processed and restaurant foods, such as Korean noodles, mandus, rice cakes and bread products, were quantified by high-performance liquid chromatography (HPLC) with UV/visible and fluorescence detector, respectively. Samples were collected from different local areas (i.e. Gangwon-do, Gyeonggi-do, Gyeongsang-do, Seoul, Jeolla-do, and Chungcheong-do). After homogenization, samples were hydrolyzed by direct alkali saponification; thereafter, fat-soluble components were extracted by a mixture of n-hexane/ethylacetate (85:15, v/v), containing 0.01% butylated hydroxytoluene (BHT). ${\beta}$-carotene and retinol contents in infant formula used as an in-house material for the analytical quality control. Among 14 Korean noodles, high contents of ${\beta}$-carotene were found in Bibim-Guksu (average 442.43 ${\mu}g/100g$) and Jjolmyeon (average 301.39 ${\mu}g/100g$). In 4 Korean mandus, the highest contents of ${\beta}$-carotene was determined in Kimchi-mandu (average 197.64 ${\mu}g/100g$), resulting in 33.3 RE of the converted vitamin A. Among 12 Korean rice cakes, Maeun-Tteokbokki and Modm-Chaltteok contained relatively high content of ${\beta}$-carotene with 205.11 and 41.33 ${\mu}g/100g$, respectively, while retinol was detected only in Maeun- Tteokbokki (1.65~10.45 ${\mu}g/100g$). In addition, among 8 bread products, 77.3 RE of pastry, 51.2 RE of buttercream- bread, and 41.4 RE of morning roll were found as the contents of the converted vitamin A.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.2021-2031
• /
• 2013

Due to the rapid economic growth within the nation, the quality of life of individuals have improved dramatically. The scope of living activities of individuals have also extended, resulting in a rapidly increasing demand for automobiles. The number of vehicles registered in Korea is rapidly increasing and will reach 188.71 million as of December 2012. Compared to the registered residents of 50.94 million provided by the Ministry of Public Administration and Security, the registered population reflects about 4 people per every automobile. Due to the high demands for vehicles, the demands for parking lots in collective housing and businesses are also increasing. In reality, the current state of expansion of parking lots are underground, due to the limited available space on ground level. Specifically, the slope of a parking lot cannot exceed 17% linear slope and 14% curved slope according to the 'parking lot laws', however studies show that the driver feels at risk for safety when stopped on the parking ramp while driving in the parking lot. This study seeks to examine the suitability of parking lot ramps, concerning the safety aspects of the driver. First, the ramp type was categorized as linear or curved, then test drives were performed based on variations of slopes, slant distances, directions and points. A survey was administered to the driver after the completion of the test drive, in order to element design for an ideal ramp. In the case of curved ramp, the results of the estimate suggests a counterclockwise, slope at a maximum of 12% incline. The maximum slope for a linear ramp was analyzed to be between 13~14%, suggesting that slope greater than 15% need to be eliminated. In conclusion, it is anticipated that the element design parking ramp reported in this study will help to serve as a reference for future parking lot related guidelines, and provide cost effective traffic safety mechanisms in future parking lot businesses to follow.

• Progress in Medical Physics
• /
• v.20 no.4
• /
• pp.269-276
• /
• 2009

Radiation treatment techniques using photon beam such as three-dimensional conformal radiation therapy (3D-CRT) as well as intensity modulated radiotherapy treatment (IMRT) demand accurate dose calculation in order to increase target coverage and spare healthy tissue. Both jaw collimator and multi-leaf collimators (MLCs) for photon beams have been used to achieve such goals. In the Pinnacle3 treatment planning system (TPS), which we are using in our clinics, a set of model parameters like jaw collimator transmission factor (JTF) and MLC transmission factor (MLCTF) are determined from the measured data because it is using a model-based photon dose algorithm. However, model parameters obtained by this auto-modeling process can be different from those by direct measurement, which can have a dosimetric effect on the dose distribution. In this paper we estimated JTF and MLCTF obtained by the auto-modeling process in the Pinnacle3 TPS. At first, we obtained JTF and MLCTF by direct measurement, which were the ratio of the output at the reference depth under the closed jaw collimator (MLCs for MLCTF) to that at the same depth with the field size $10{\times}10\;cm^2$ in the water phantom. And then JTF and MLCTF were also obtained by auto-modeling process. And we evaluated the dose difference through phantom and patient study in the 3D-CRT plan. For direct measurement, JTF was 0.001966 for 6 MV and 0.002971 for 10 MV, and MLCTF was 0.01657 for 6 MV and 0.01925 for 10 MV. On the other hand, for auto-modeling process, JTF was 0.001983 for 6 MV and 0.010431 for 10 MV, and MLCTF was 0.00188 for 6 MV and 0.00453 for 10 MV. JTF and MLCTF by direct measurement were very different from those by auto-modeling process and even more reasonable considering each beam quality of 6 MV and 10 MV. These different parameters affect the dose in the low-dose region. Since the wrong estimation of JTF and MLCTF can lead some dosimetric error, comparison of direct measurement and auto-modeling of JTF and MLCTF would be helpful during the beam commissioning.

• Archives of design research
• /
• v.17 no.2
• /
• pp.77-86
• /
• 2004

User-Centered Design Approach plays important role in dealing with usability issues for developing modern technology products. Yet it is still questionable whether the User-Centered approach is enough for the development of successful consumer contents since the User-Centered Design is originated from the software engineering field where meeting customers' functional requirement is the most critical aspect in developing a software. However, modern consumer market is already saturated and in order to meet ever increasing consumer requirements, the User-Centered Design approach needs to be expanded. As a way of incorporating the User-Centered Approach into the consumer product development, Jordan suggested the 'Pleasure-based Approach' in industrial design field, which usually generates multi-dimensional user requirements: 1)physical, 2)cognitive, 3)identity and 4) social. It is the current tendency that many portal and community service providers focus on fulfilling both functional and emotional needs for users when developing new items, contents and services. Previously fulfilling consumers' emotional needs solely depend on visual designer's graphical sense and capability. However, taking the customer-centered approach on withdrawing consumers' unknown needs is getting critical in the competitive market environment. This paper reviews different types of user research techniques and categorized into 6 ways based on Kano(1992)'s product quality model. Based on his theory, only performance factors, such as suability, can be identified through the user-centered design approach. The user-centered design approach has to be expanded to include factors include personality, sociability, pleasure, and so on. In order to identify performance as well as excellent factors through user research, a user-research framework was established and tested through the case study, which is ' the development of new online service for teens '. The results of the user research were summarized at the end of the paper and the pros and cons of each research techniques were analyzed.

• Korean Journal of Environmental Biology
• /
• v.24 no.3
• /
• pp.230-239
• /
• 2006

Nutrient over-enrichment as a consequence of anthropogenic loading leads to eutrophication, which has the detrimental effects on river and stream ecosystems. To examine dynamics of factors causing cultural eutrophication in a over-licked mountain stream due to anthropogenic loading, physicochemical parameters were measured from 5 stations in the upper Daecheon stream, Busan, from January 2002 to May 2003. The five study sites were located along the stream gradient. DC1 is upper most clean site, and DC5 is located at the lowest area. Wastewater was released into the stream from just upstream of DC2 site. Water column ammonium and phosphate concentrations were higher during winter than other seasons, while water column nitrate +nitrite concentration did not show clear seasonal variation. Water column ammonium, nitrate+nitrite and phosphate concentrations were lowest at DC1 and highest at DC2 in which waste water loading occurred. TOC and DOC, conductivity, turbidity, and BOD in the water column were also increased drastically at DC2, and then decreased at DC5. Sediment pore water phosphate concentrations during winter and spring were higher than those in summer and fall, while sediment pore water ammonium and nitrate +nitrite concentrations showed no seasonal trend. Sediment pore water ammonium and phosphate concentration were also increased at DC2 and slightly decreased at DC5, while sediment pore water nitrate+nitrite concentration was highest at DC5. Organic matter and inorganic nutrients at up-stream of Daechon stream significantly increased as a result of wastewater discharge, and the nutrient concentrations decreased at low-stream suggesting self-purification ability of the stream.

• Analytical Science and Technology
• /
• v.25 no.6
• /
• pp.483-491
• /
• 2012

This study is to investigate the issues on how to secure stability during the purification process for the production of recombinant protein A. The final recombinant protein A is produced by passing through the cation exchange column (SP) and the anion-exchange column (Q) during the production process, for which the samples produced by the step-by-step processes can be exposed to trouble in securing stable storage in case the next process cannot be taken within the proper time period. Accordingly, this study aims to evaluate the proper storage conditions and length of time when storing samples produced in the production process. That is, in this study, how to store fair samples, how long the storage period should be set up, and how to evaluate the security of its quality depending on time are dealt with. The items to be experimented with were enodotoxin, SDS-PAGE, HPLC purity and concentration. Experimental results showed that after passing the cation exchange column, when stored at $4^{\circ}C$ or room temperature, SDS-PAGE showed a major band, endotoxin is 5.0 Eu/mg or less, and concentration is on average of 8.21 to 8.24 mg/mL and RSD% 0.10~0.62%. In addition, HLPC purity showed somewhat stable results; at the HPLC purity 214 nm, the average is 99.24% to 99.37% and RSD% is 0.22~0.29%, while the average is 89.72% to 89.80% and RSD% 0.62~1.26% at 280 nm. On the contrary, after passing the anion exchange column, when stored at $4^{\circ}C$ or room temperature, SDS-PAGE revealed the major band, endotoxin is 0.5 Eu/mg or less, and concentration is on average of 5.59 mg/mL and RSD% 0.03~0.10%. when it comes to HLPC purity, the result showed that at the HPLC purity 214 nm, the average is 99.74% and RSD% is 0.10~0.11%, while the average is 96.16% to 96.85% and RSD% 0.72~1.13%. In conclusion, the stability of fair samples of recombinant protein A during the manufacturing process could be obtained without substance decomposition for 7~8 days at $4^{\circ}C$ or 20~21 days at room temperature.

• Korean Journal of Food Science and Technology
• /
• v.15 no.1
• /
• pp.77-89
• /
• 1983

Properties and frying performance of domestic rice bran oil were studied. For this purpose, the analyses on the following characteristics were performed and their comparison with the characteristics of soybean oil was made: fatty acid composition, glycerides, composition, acid value, specific gravity, color, petroleum ether insoluble oxidized fatty acid, viscosity, smoke point, foam test, and water solubility. The results were as follow: 1) Fatty acid composition of domestic rice bran oil by gas chromatography was same as perviously reported, and similar to the fatty acid composition of the rice bran oil in foreign countries. Also the glyceride composition of domestic rice bran oil was analyzed by the methods of TLC, column chromatography, and high performance liquid chromatography. The results were monoglyceride ranged from one to four percent; diglyceride 30-30% and triglyceride 66-80%. Consequently, the composition was proven completely different from that of the other edible oils. 2) The high contents of mono-glyceride in rice bran oil resulted in high values of specific gravity and water-solubility respectively. However, high contents mono glyceride and diglyceride indicated little affection to changes of acid value, color, petroleum ether insoluble oxidized fatty acid, and smoke point on frying. 3) Because of low contents of linoleic acid, domestic rice bran oil was estimated stable on frying, whereas soybean oil was easily polymerized. 4) A serious foaming and low smoke point on Frying in domestic rice bran oil were caused by its impurities. It seems that monoglyceride and diglyceride had little relation with foaming and smoke point. 5) Oils with serious foaming and low smoke point on frying caused a substantial quality loss in terms of flavor and appearance of fried materials.