• 산업경영시스템학회지
• /
• 제42권3호
• /
• pp.95-108
• /
• 2019

Quality management has become an pervasive philosophy in most sectors of business. Specific movements such as statistical quality control, quality circle, total quality management, and quality management system have become embedded in business organizations. Only the companies with competitive edge can survive in the competition in global market. KSA(Korean Standards Association) established in 1962 has launched all kinds of quality education, quality standard certification service for business, and KNQA(Korean National Quality Award) system. This article considers quality competitiveness excellent company award among KNQA. We performed a statistical analysis of audit data for quality competitiveness excellent company for three years, from 2015 to 2017. By using ANOVA and two sample t-tests, the average scores of 13 evaluation fields were significantly different depending on company size and type. We proposed ways to improve the current hall of fame system. We discovered that the average scores of 13 evaluation fields in the audit data according to years and hall of fame status were not significantly different. We also showed linear relationships among 13 evaluation fields by correlation analysis and obtained an estimated linear regression equation : Business Performance, which is a comprehensive index, as a dependent variable was significantly related to Customer Focus and Product Liability as regressor variables among 13 evaluation fields by regression analysis.

• 전자공학회논문지
• /
• 제50권5호
• /
• pp.128-133
• /
• 2013

본 논문에서는 RFIC 설계에 응용 가능한 인덕터의 Quality factor 및 Effective inductance를 비교 분석하기 위해 Octagonal 인덕터를 90nm CMOS 공정을 이용하여 제작하였다. 내부반경을 설계변수로 갖는 인덕터의 경우 내부반경이 증가함에 따라 Quality factor가 감소하고 Effective inductance의 값이 증가하였다. 회전수를 설계변수로 갖는 인덕터의 경우 금속의 회전수가 증가함에 따라 Quality factor의 값이 감소하고 Effective inductance의 값이 증가하는 것을 확인하였다. 따라서 RFIC 회로 설계에 있어서 인덕터의 구조는 Q-factor 및 inductance 각각의 상대적 중요도에 따라 선택 되어져야 된다고 할 수 있다.

• 산업경영시스템학회지
• /
• 제39권2호
• /
• pp.150-160
• /
• 2016

The quality of service in ERP services is a key issue in innovating the ERP performance as an IT service for corporations. Currently, most of the research works for this area are based on the existing quality models such as SERVQUAL, which are said not to measure service quality properly. Also, it does not consider the factor of the system acceptance, which is thought to be closely related to the quality of service in this type of IT services. Therefore, a research model is required, which can address the issues related to the ERP service quality measurements. In this paper, new research models have been proposed, and empirical data obtained from SME's ERP users have been applied to the proposed model to analyze the causal relationship between quality factors and to identify the most suitable quality measures. Also, the relationship between the service quality and the system acceptance was analyzed using a combined model. The results show that factors such as productivity and convenience affects the quality mostly and that the most appropriate measure for the service quality of ERP service is satisfaction. Also, for the system acceptance, the ease-of-use is the main factor. And, the service quality and system acceptance shows a strong correlation. This means that, in order to enhance the quality of ERP services, the service provider needs to provide customers with productivity-enhanced user-friendly IT services and active product support. The work of this research can help to improve the service quality and the user acceptance of ERP services and to lead further research works in this area.

• 대한산업공학회지
• /
• 제41권5호
• /
• pp.481-487
• /
• 2015

In the product development stage, it is very important to ensure demanded quality level before moving to the full-scale manufacturing. For example, in developing guided weapons, live-fire tests are required to verify the final performance of the weapons which are very expensive. The quality evaluation of the guided weapons needs destructive testing, which makes it necessary to test as small number of samples as possible. This paper presents sampling inspection plans and calculating system for finite population guided weapons, which can meet the demanded quality level and confidence level with the minimum number of performance tests. The result of this paper can be useful for any kind of costly destructive testing.

• International Journal of Automotive Technology
• /
• 제4권4호
• /
• pp.193-201
• /
• 2003

The problem of brake judder is typically caused by defects of quality manufacturing. DFSS (Design for six sigma) is a design process for quality improvement. DFSS will result in more improved but less expensive quality products. This paper presents an implementation of DFSS for quality improvement of the brake judder of heavy-duty trucks. Carrying out 5 steps of DFSS, the major reasons for defects of quality are found. The numerical approximation of the brake system is derived by means of the response surface method. Its quality for brake judder is improved by using the sigma based robust design methodology. Results are compared between the conventional deterministic optimal design and the proposed sigma based robust design. The proposed one shows that manufacturing cost may increase as the quality level increase. The proposed one, however, is more economical in aspect of the overall cost since the probability of failure dramatically goes down.

• International Journal of Quality Innovation
• /
• 제5권1호
• /
• pp.10-22
• /
• 2004

The paper outlines a comprehensive three-step approach to the development of advanced strategies for quality control of a complex machining process. The research framework is a developed concept for Integrated Supervisory Process Control. The promising results obtained demonstrate a non-traditional approach to the deployment of quality and productivity requirements set by the system users, whereby the efficiency and systematization of the development of quality control strategies can be significantly improved.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.330-335
• /
• 2002

Resistance spot welding is one of the most widely used processes in sheet metal fabrication. Quality assurance of welding has been important to increase the productivity. In this study, weld quality estimation using primary circuit dynamic resistance applied to the in-process real-time systems. For quality estimation, factors relating to quality were extracted from the dynamic resistance, measured in the timer. The relationship between these factors and weld quality was determined through a artificial neural network model. This method has the advantage over the conventional one, such as obtaining the quality information without the use of extra devices.

• 품질경영학회지
• /
• 제23권2호
• /
• pp.10-27
• /
• 1995

This paper illustrates a method of developing a function of quality costs in manufacturing systems. It begins with a discussion of the problem statement of this research. A review of existing literatures related to quality costs and economic design of quality inspection methods are discussed. Next mathematical models that quantify the production cycle time and quality costs are formulated. This paper ends with an example that demonstrates the usefulness of the model and highlights the importance of using a system approach. The main contribution of this work is the more realistic considerations of the four types of quality costs (prevention cost, appraisal cost, internal failure cost, external failure cost) in manufacturing systems.

• Korean Journal of Geomatics
• /
• 제2권2호
• /
• pp.145-151
• /
• 2002

GIS technique is applied to the analysis of ambient air quality information. For this study, the TMS-monitored air quality information was imported with the geographical information of the TMS stations in Capital Area. It is found that currently available GIS technique has a great extend of potential for air quality management. From the analysis of air quality information, the GIS application demonstrates the poor air quality in the central Capital Area and the it is improved as it travels down to the suburb area. The ambient air quality is also proven to be highly influenced by the ozone concentration in a mid-summer day.

• 산업경영시스템학회지
• /
• 제37권4호
• /
• pp.90-97
• /
• 2014

The mobile SNS is a promising e-service platform of the future. However, measuring its service quality is a challenge. An appropriate model for measuring service quality is required. This paper proposes e-service quality models for analyzing mobile SNS platform quality, based on previous service quality researches. An empirical study is performed on the proposed models. The results show that constructs of existing e-service models such as responsiveness and assurance do not fit the mobile SNS platform, and that loyalty and value are better measures for mobile service quality.