• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.463-467
• /
• 2003

This part of ISO 1940 covers the following: a) identification of errors in the balancing process of rigid rotors: b) assessment of errors: c) guidelines for taking into account: d) the evaluation of residual unbalance in two correction planes. Detailed consideration of errors associated with the determination of residual unbalance is covered in the first part of ISO 1940.

• Proceedings of the ESK Conference
• /
• 1996.04a
• /
• pp.259-263
• /
• 1996

Psychological action is physiological response of outernal stimulus. Physiological response is accompanied b physiological signals which are EEG, EMG, GSR, ECG, BP, and tec. Physiological signals are recently studied for determination of human phychological state. Psychological activity causes electric potential of brain. Physiological signal is considered as measurement of human psychological state. Aditory sensibility which is one of the sense of human may determine differences between positive and negative feeling. EEG and GSR variation with auditory quality of stimulus can be define human negative and positive mental state. This study is to characterize parameters which can determine negative and positive psycholigical state of human.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.2
• /
• pp.846-851
• /
• 2017

Piezoelectricity is the capability of a piezoelectric material to change mechanical energy into electrical energy. The determination of electrical and mechanical properties plays a significant role in characterizing the piezoelectric material. The energy losses characteristics of piezoelectric material can be described by mechanical quality factor. In this paper, the output voltage and mechanical quality factor of Lead Zirconate Titanate (PZT-4A) piezoelectric material is determined under various resistance and loading conditions by using the test setup. The commercial FEM software ABAQUS is used to analyze the performance of piezoelectric material under static loading conditions. It is observed that these properties affect the performance of a material particularly in the designing of smart structures. The experimental results are partially compared to the simulation values.

• Industrial Engineering and Management Systems
• /
• v.6 no.2
• /
• pp.136-145
• /
• 2007

The selection of suppliers and the determination of order quantities to be placed with those suppliers are important decisions in a supply chain. In this research, a non-linear mixed integer programming model is presented to select suppliers and determine the order quantities. The model considers the purchasing cost which takes into account quantity discount, the cost of transportation, the fixed cost for establishing suppliers, the cost for holding inventory, and the cost of receiving poor quality parts. The capacity constraints for suppliers, quality and lead-time requirements for the parts are also taken into account in the model. Since the purchasing cost, which is a decreasing step function of order quantities, introduces discontinuities to the non-linear objective function, it is not easy to employ traditional optimization methods. Thus, a heuristic algorithm, called particle swarm optimization (PSO), is used to find the (near) optimal solution. However, PSO usually generates initial solutions randomly. To improve the PSO solution quality, a heuristic procedure is proposed to find an initial solution based on the average unit cost including transportation, purchasing, inventory, and poor quality part cost. The results show that PSO with the proposed initial solution heuristic provides better solutions than those with PSO algorithm only.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.13-13
• /
• 2017

By the progress of genome sequencing, infrastructures for marker-assisted breeding (MAB) of rice came to be established. Fine mapping and gene isolation have been conducted using the breeding materials derived from natural variations and artificial mutants. Such genetic analysis by the genome-wide dense markers provided us the knowledge about the many genes controlling important traits. We identified several genes or quantitative trait loci (QTL) for heading date, blast resistance, eating quality, high-temperature stress tolerance, and so on. NILs of each gene controlling heading date contribute to elongate the rice harvest period. Determination of precise gene location of blast resistance gene pi21, allowed us to overcome linkage drag, co-introduction of undesirable eating quality. We could also breed the first practical rice cultivar in Japan with a brown planthopper resistance gene bph11 in the genetic back-ground of an elite cultivar. Discovery of major and minor QTLs for good eating quality allowed us to fine-tune of eating quality according to the rice planting area or usage of rice grain. Many rice cultivars have bred efficiently by MAB for several traits, or by marker-assisted backcross breeding through chromosome segment substitution lines (CSSLs) using genetically diverse accessions. We are also systematically supporting the crop breeding of other sectors by MAB or by providing resources such as CSSLs. It is possible to pyramid many genes for important traits by using MAB, but is still difficult to improve the yielding ability. We are performing a Genomic Selection (GS) for improvement of rice biomass and grain yield. We are also trying to apply the genome editing technology for high yield rice breeding.

• Food Science of Animal Resources
• /
• v.32 no.5
• /
• pp.540-544
• /
• 2012

During heat treatment and storage of milk, deteriorative reaction takes place, which consequently influence on the milk quality. In this study, formation of lactulose and furosine under different thermal conditions and storage conditions, and the ratio of lactulose and furosine (LU/FU) in presence of reconstituted milk powder were determined to establish chemical indicators for heat damages of milk and the adulteration of fresh milk in dairy field. The lactulose and furosine contents linearly increased with increased heating temperature and heating time. It showed high correlation between the formation of lactulose and furosine, and the treatment temperature and time (p<0.05). The lactulose and furosine concentration of HTST milk and UHT milk noticeably increased during storage at $30^{\circ}C$, but there was no noticeable increase of lactulose and furosine concentration at lower storage temperature. In the raw milk, the lactulose and furosine contents greatly increased with the addition of reconstituted milk. The increase level of furosine was much higher than that of lactulose, which consequently resulted in the lower LU/FU ratio in milk as increase of added reconstituted milk amounts. As comparing with raw milk, there was more than twice reduction in LU/FU ratios after the addition of reconstituted milk (p<0.05). It can be concluded that lactulose and furosine are suitable milk quality indicators of heat damage and for demonstrating improper addition of reconstituted milk powder.

• The Korean Journal of Health Service Management
• /
• v.5 no.3
• /
• pp.101-110
• /
• 2011

This study analyzed affecting factors of employees working at dental hospitals to the organizational commitment and service quality, and then tried to utilize it as a basic data in executing personnel training policies for dental hospital's practitioners. The survey was conducted from July 1st to July 30th, 2010, and used 193 copies for this research analysis. As a hypothetical verification result through regression analysis, means and capabilities among empowerment factors influenced significant positive (+) effects, and self-determination and influences did not make significant effects. Also, organization commitment was displayed as influencing significant positive (+) effects to the service quality. When considering this research's results as a basement, an alternative for the managerial innovation shall be established for promoting mutual developments of individuals and organization in midst of promptly changing economic environments. That is, a personal training system has to be set up in which more decision-making rights on given assignments of dental hospital's employments are endowed, and then responsibilities are directed to be charged so much by introducing the empowerment concept instead of the managerial technique centering on controls.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.06b
• /
• pp.119-137
• /
• 2003

Electrical resistivity is one of physical property of the earth and measured by electrical resistivity survey, electrical resistivity logging and laboratory test. Recently, electrical resistivity Is widely used In determination of rock quality in road and railway tunnel design. To get more reliable rock quality data from electrical resistivity, it needs a lot of test and study on correlation of resistivity and rock quality. Firstly, we did rock property test In laboratory, such as uniaxial compressive strength(UCS), P wave velocity, Young's modulus and electrical resistivity. We correlate each test results and we found out that electrical resistivity has exponentially related to UCS and P wave velocity and linearly related to Young's modulus. And we accomplished electrical resistivity survey in field site and carried out electrical resistivity togging at In-situ area. Also we performed rock classification, such as RQD, RMR and Q-system and we correlate electrical resistivity to rock classification results. We found out that electrical resistivity logging data are highly correlate to RQD, Q and RMR. Also we found out that electrical resistivity survey data are lower than electrical resistivity logging data when there are faults or fractures. And it cause electrical resistivity survey data to lowly correlate to RQD, Q and RMR.

• Biomedical Engineering Letters
• /
• v.8 no.4
• /
• pp.355-364
• /
• 2018

When focusing using an ultrasonic transducer array, a main lobe is formed in the focal region of an ultrasound field, but side lobes also arise around the focal region due to the leakage. Since the side lobes cannot be completely eliminated in the focusing process, they are responsible for subsequent ultrasound image quality degradation. To improve ultrasound image quality, a signal processing strategy to reduce side lobes is definitely in demand. To this end, quantitative determination of main and side lobes is necessary. We propose a theoretically and actually error-free method of exactly discriminating and separately computing the main lobe and side lobe parts in ultrasound image by computer simulation. We refer to images constructed using the main and side lobe signals as the main and side lobe images, respectively. Since the main and side lobe images exactly represent their main and side lobe components, respectively, they can be used to evaluate ultrasound image quality. Defining the average brightness of the main and side lobe images, the conventional to side lobe image ratio, and the main to side lobe image ratio as image quality metrics, we can evaluate image characteristics in speckle images. The proposed method is also applied in assessing the performance of side lobe suppression filtering. We show that the proposed method may greatly aid in the evaluation of medical ultrasonic images using computer simulations, albeit lacking the use of actual experimental data.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.796-801
• /
• 1994

Measuring noise, sound quality or acoustical comfort presents a difficult task for the acoustic engineer. Sound and noise are ultimately jugded by human beings acting as analysers. Regulations for determining noise levels are based on A-weighted SPL measurement performed with only one microphone. This method of measurement is usually specified when determining whether the ear can be physically damaged. Such a simple measurement procedure is not able to determine annoyance of sound events or sound quality in general. For some years investigations with binaural measurement analysis technique have shown new possibilities for the objective determination of sound quality. By using Artificial Head technology /1/, /2/ in conjunction with psychoacoustic evaluation algorithms - and taking into account binaural signal processing of human hearing, considerable progress regarding the analysis of sounds has been made. Because sound events often arise in a complex way, direct conclusions about components subjectively judged to be annoying with regard to their causes and transmission paths, can be drawn in a limited way only. A new procedure, complementing binaural measurement technology combined with mulit-channel measuements of acceleration sensor signals has been developed. This involves correlating signals influencing sound quality, analyzed by means of human hearing, with signals form different acceleration sensors fixed at different positions of the sound source. Now it is possible to recognize the source and the transmission way of those signals which have an influence on the annoyance of sound.