• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.3
• /
• pp.91-104
• /
• 2013

The objectives of this study were to monitor and assess the environmental impacts of indirect wastewater reuse on water quality and soil in paddy fields. Yongin monitoring site (YI) irrigated from agricultural reservoir and Osan monitoring site (OS) irrigated with treated wastewater diluted with stream water were selected as control and treatment, respectively. Monitoring results for irrigation water quality showed a significant statistical difference in salinity, exchangeable cation and nutrients. Pond water quality showed a similar tendency with irrigation water except for the decreased difference in nutrients due to the fertilization impact. Soil chemical properties mainly influenced by fertilization activity such as T-N, T-P, and $P_2O_5$ were changed similarly in soil profiles of both monitoring sites, while the properties, EC, Ca, Mg, and Na, mainly effected by irrigation water quality showed a considerable change with time and soil depth in treatment plots. Heavy metal contents in paddy soil of both control and treatment did not exceed the soil contamination warning standards. This study could contribute to suggest the irrigation water quality standards and proper agricultural practices including fertilization for indirect wastewater reuse, although long-term monitoring is needed to get more scientific results.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.551-554
• /
• 2003

This study was carried out to investigate the effects of the pH of irrigation water on the growth, yield, and grain quality of rice. It acquire fundamental knowledges to set up irrigation water quality standards. The pot experiment was conducted with 5 treatments using irrigation waters with various pH values(control, 4, 6, 8, 10) and replicated four times with randomized block design. The results of this study showed that the uptake of N, P, and K, Ripened grain ratio and yield of rice tended to be reduced at the irrigation water of pH 4 and pH 10. P uptake, Ripened grain ratio and yield of rice at pH 4 water were significantly lower than the control. K uptake at pH 10 water was significantly lower than the control. Plant height, SPAD value and protein content of rice were not affected by the pH of irrigation water.

• Korean Journal of Food Science and Technology
• /
• v.36 no.1
• /
• pp.174-182
• /
• 2004

Hygienic standards for pizza specialty restaurant located in Seoul during summer, 2000 were established based on HACCP concept by measuring temperature, time, pH, $A_{w}$ and microbiological assessments of pizza, and evaluation of hygienic conditions of kitchens and workers. Kitchen and worker conditions were average 1.2 and 1.0 (3 point Sly's scale), respectively, Microbial contaminations occurred at $5-60^{\circ}C$, pH above 5.0, and $A_{w}$ (0.93-0.98). Microbial assessments for pizza processing revealed $1.5{\times}10^{2}-3.9{\times}10^{8}\;CFU/g$ of TPC and $0.5{\times}10^{1}-1.6{\times}10^{7}\;CFU/g$ of coliforms, exceeding standards ($TPC\;10^{6}\;CFU/g\;and\;coliform\;10^{3}\;CFU/g$) established by Solberg et al., although significantly decreased after baking. S. aureus was not discovered, but Salmonella was found in onions. Tools and containers such as pizza cutting knife, topping container, serving bowl, pizza plate, working board, and dough kneading board contained $6.2{\times}10^{2}-1.1{\times}10^{9}\;CFU/g$ of TPC, $2.0{\times}10^{1}-6.2{\times}10^{3}\;CFU/g$ of coliforms. Workers' hands contained $3.1{\times}10^{4}\;CFU/g$ of TPC and S. aureus as compared to safety standards of Harrigan and McCance (500 and 10 CFU/g of TPC and coliforms per $100cm^{2}$). CCPs (critical control points) were determined as receiving, topping, and baking according to CCP decision tree analysis. Results suggest purchase of quality materials, careful monitoring of time and temperature, hygienic use of tools and utensils, and sanitary practicer by workers are recommended as control points for safe pizza production.

• Journal of Korea Water Resources Association
• /
• v.54 no.spc1
• /
• pp.1071-1081
• /
• 2021

In addition to the current quality control procedures for the weather observation performed by the Korea Meteorological Administration (KMA), this study proposes quality inspection standards for Internet of Things (IoT) urban weather observed data based on machine learning that can be used in smart cities of the future. To this end, in order to confirm whether the standards currently set based on ASOS (Automated Synoptic Observing System) and AWS (Automatic Weather System) are suitable for urban weather, usability was verified based on SKT AWS data installed in Seoul, and a machine learning-based quality control algorithm was finally proposed in consideration of the IoT's own data's features. As for the quality control algorithm, missing value test, value pattern test, sufficient data test, statistical range abnormality test, time value abnormality test, spatial value abnormality test were performed first. After that, physical limit test, stage test, climate range test, and internal consistency test, which are QC for suggested by the KMA, were performed. To verify the proposed algorithm, it was applied to the actual IoT urban weather observed data to the weather station located in Songdo, Incheon. Through this, it is possible to identify defects that IoT devices can have that could not be identified by the existing KMA's QC and a quality control algorithm for IoT weather observation devices to be installed in smart cities of future is proposed.

• International Journal of Computer Science & Network Security
• /
• v.22 no.12
• /
• pp.146-152
• /
• 2022

The National Agency for Quality Assurance in Higher Education plays a crucial role in education in Ukraine, as an independent entity creates and ensures quality standards of higher education, which allow to properly implement the educational policy of the state, develop the economy and society as a whole. The purpose of the article: to reveal the crucial role of the National Agency for Quality Assurance in Higher Education to create quality management of higher education institutions, to show its mechanism as an independent entity that creates and ensures quality standards of higher education. and society as a whole. The mission of the National Agency for Quality Assurance in Higher Education is to become a catalyst for positive changes in higher education and the formation of a culture of its quality. The strategic goals of the National Agency are implemented in three main areas: the quality of educational services, recognition of the quality of scientific results, ensuring the systemic impact of the National Agency. The National Agency for Quality Assurance in Higher Education exercises various powers, which can be divided into: regulatory, analytical, accreditation, control, communication. The effectiveness of the work of the National Agency for Quality Assurance in Higher Education for 2020 has been proved. The results of a survey conducted by 183 higher education institutions of Ukraine conducted by the National Agency for Quality Assurance in Higher Education are shown. Emphasis was placed on the development of "Recommendations of the National Agency for Quality Assurance in Higher Education regarding the introduction of an internal quality assurance system." The international activity and international recognition of the National Agency for Quality Assurance in Higher Education are shown.

• Analytical Science and Technology
• /
• v.23 no.3
• /
• pp.255-260
• /
• 2010

The Ministry of Environment simultaneously revised testing methods and emission standards of adhesives product on the "Law of indoor air quality management" for the effective management of the building materials releasing pollutants in great quantities. Accordingly, it is impossible to compare original standards with revised standards directly. The influences of each factor of the revised testing methods of adhesive product on the emission rate of pollutants are reviewed through comparing with the original testing method. Through this study, revised pollutant emission control standards were assessed. With the result that it is found that emission rate of adhesives product is weakened two and half times by changing test period and the emission rate resulting from changing drying time has little difference. As a result of comparing TVOC emission standards with the original testing method considering the modification of testing methods, it is found that the emission standard through this revision is strengthened about 2.1 times more than that of present testing method.

• Safety and Health at Work
• /
• v.11 no.1
• /
• pp.10-18
• /
• 2020

Background: The elevated risk of occupational infection such as tuberculosis among health workers in many countries raises the question of whether the quality of occupational health and safety (OHS) and infection prevention and control (IPC) can be improved by auditing. The objectives of this study were to measure (1) audited compliance of primary health-care facilities in South Africa with national standards for OHS and IPC, (2) change in compliance at reaudit three years after baseline, and (3) the inter-rater reliability of the audit. Methods: The study analyzed audits of 60 primary health-care facilities in the Western Cape Province of South Africa. Baseline external audits in the time period 2011-2012 were compared with follow-up internal audits in 2014-2015. Audits at 25 facilities that had both internal and external audits conducted in 2014/2015 were used to measure reliability. Results: At baseline, 25% of 60 facilities were "noncompliant" (audit score<50%), 48% "conditionally compliant" (score >50 < 80%), and only 27% "compliant" (score >80%). Overall, there was no significant improvement in compliance three years after baseline. Percentage agreement on specific items between internal and external audits ranged from 28% to 92% and kappa from -0.8 to 0.41 (poor to moderate). Conclusion: Low baseline compliance with OHS-IPC measures and lack of improvement over three years reflect the difficulties of quality improvement in these domains. Low inter-rater reliability of the audit instrument undermines the audit process. Evidence-based investment of effort is required if repeat auditing is to contribute to occupational risk reduction for health workers.

• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.41-46
• /
• 2005

The production, processing, sale and service of food materials are not subject to attainment via a single country. In accordance with internationalization of the world, issues related to food safety have emerged as critical international concerns and they are closely associated with the health and interest of domestic consumers, producers, manufacturers, and distributors. As a third party certification standards, ISO 22000 is in progress International Organization for Standardization(ISO) and the Draft International Standard(DIS) has already been presented on December 2004. The purpose of this study is to analyze the international standards, guidelines and legislation in regard of Food Safety Management System(FSMS) including ISO 9001, Hazard Analysis Critical Control Point(HACCP) and Product Liability(PL) so as to present Korean-model Food Safety Management System requirements and system establishment model.

• Magazine of the Korea Concrete Institute
• /
• v.28 no.6
• /
• pp.82-86
• /
• 2016

• Journal of radiological science and technology
• /
• v.33 no.4
• /
• pp.387-394
• /
• 2010

In the field of healthcare, the conventional sterilization treatments have been replaced by irradiation methods which are in accordance with internationally well established quality standards. The quality control in radiation sterilization assures that the absorbed dose of the irradiated material is in agreement with its requirements and standards. The electron beam irradiation requires technical assessments of more process parameters than gamma irradiation does. Korea has witnessed wide uses of electron accelerators since early 2000 but there hasn't been research experiences relating to quality system in accordance with international standards. The new large scale e-beam irradiation system with the specification of 10 MeV, 8 kW was installed and operated in 2008 by Seoul Radiology Services Co. It consists of the electron accelerator, product handling system, safety, documentation and control subsystems into an integrated system to meet the requirement of the Good Manufacturing Practice such as process quality assurance and management of product tracking records. To implement the international standard such as EN ISO11137, it is necessary to understand the purposes aimed in the standard and carry out the tests following the procedures required. This study presented the specification of the e-beam facility and showed what its design requirements and features are. The test results on a variety of process parameters were presented and validated it they are within the required limits.