• 대한본초학회지
• /
• 제20권4호
• /
• pp.133-140
• /
• 2005

Objectives : We have been used many herbal medicines after processing to improve the effect, decrease toxicity and side-effect, and change property. We have studied the physico-chemical change and HPLC pattern of Morindae Radix by means of processing method. Methods : This study was investigated the contents of loss on drying, residue on ignition, residue on acid insoluble ignition, 50% ethanol extract and HPLC pattern of Morindae Radix(Morinda officinalis How.) by processed and non-processed. We have conducted Morindae Radix and Damnacanthi Radix which is circulated in herbal medicine market by forgery. Processed Morindae Radix was prepared by heating of added to salt(SP), liquor(LP) and Glycyrrhizae Radix solution(GP) for 20-40 minutes. Results and Conclusions : From this analysis, we found that the content of 50% ethanol extract was increased by processing method. And we were detected distinguishable marker of processed and non-processed from Morindae Radix(Morinda officinalis How.) by HPLC pattern analysis.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2006년도 특별논문집
• /
• pp.122-127
• /
• 2006

In case of lap joint fillet welds of thin plate, the example which is applicable to Plasma Welding increases substituting for the exiting TIG Welding but the quality of Plasma arc welding has a special feature influenced sensitively by the condition of welding caused by controlling the various parts of welding torch. This research is purposed to improve lap joint fillet welds of thin plate in high quality and attain the high productivity and it is examined that how the change of electrode tip angle and Setback has an effect on the quality of welding and it is investigated how the change of Setback and Standoff has an effect on Melting efficiency using Response Surface Analysis.

• International Journal of Quality Innovation
• /
• 제2권1호
• /
• pp.106-116
• /
• 2001

The purpose of business strategy is to achieve competitive advantages which includes higher efficiency, better quality, more innovation and faster customer response. In other words, The business strategy is to build unique capability of lower cost and/or differentiation. In production aspect, unique capability means better production power with better performance at 3M(Man, Machine, Material) of input and PQCDSM (Product, Quality, Cost, Delivery, Safety, Moral) from output. The Total Productive management (TPM), a series of improvement activities focused on reduction of equipment loss, is a tool to establish business competitive advantages. In this paper, several domestic companies who won the Japan TPM Award have been studied. It is found that there is a strong cause-effect relationship between TPM and competitive advantages because. 1. TPM can change employees mindset effectively. 2. TPM can upgrade employees capabilities. 3. TPM can lead to excellent productivity.

• 한국대기환경학회지
• /
• 제34권5호
• /
• pp.687-696
• /
• 2018

In order to develop effective emission abatement strategies for coal-fired power plants, we analyzed the shutdown effects of coal-fired power plants on $PM_{2.5}$ concentration in June by employing air quality model for the period from 2013 to 2016. WRF (Weather Research and Forecast) and CMAQ(Community Multiscale Air Quality) models were used to quantify the impact of emission reductions on the averaged $PM_{2.5}$ concentrations in June over Chungcheongnam-do area in Korea. The resultant shutdown effects showed that the averaged $PM_{2.5}$ concentration in June decreased by 1.2% in Chungcheongnam-do area and decreased by 2.3% in the area where the surface air pollution measuring stations were located. As a result of this study, it was confirmed that it is possible to analyze policy effects considering the change of meteorology and emission and it is possible to quantitatively estimate the influence at the maximum impact region by utilizing the air quality model. The results of this study are expected to be useful as a basic data for analyzing the effect of $PM_{2.5}$ concentration change according to future emission changes.

• 한국정밀공학회지
• /
• 제22권11호
• /
• pp.59-63
• /
• 2005

Since human listening is very sensitive when the sound hit him, the subjective index of sound quality is required. Therefore, at each situation of sound evaluation its composed with the sound quality factor. But, when substituting the level of one frequency band we could not see the tendency of substitution at whole frequency band during the sound quality evaluation. In this study a design of experiment is used. The frequency domain is divided into an equally 12 parts and each level of domain whether is given increase or decrease due to the change of frequency band based on 'sharp' and 'annoy' of the sound quality is analyzed. By using the design of experiment the number of test is reduce very effectively by the number of experiment and each band the main effect will be as a solution. The case of sound quality for 'sharp' and 'annoy' at each band, the change of band (increase or decrease of sound pressure or keep maintain) which will be the most effects on the characteristics of sound quality can be identify and this will be able to us to select the objective frequency band. Through these obtained results the physical changes of level at arbitrary frequency domain sensitivity can be adapted.

• 품질경영학회지
• /
• 제50권3호
• /
• pp.533-543
• /
• 2022

Purpose: The purpose of this study is to identify and resolve the causes of defects in the unmanned aerial vehicle launch system(propulsion wire fracture, rear rail deformation) and to prevent recurrence. Methods: The causes of the two defects were derived through fault tree analysis for each of the two defects and fault reproduction tests. In the case of propulsion wire, the installation of a high speed camera to check the behavior of wire was the driving force behind the defect resolution. Results: The results of this study are as follows; It was determined that the thickness of the washer was less than the maximum tolerance of the pulley was the cause of the propulsion wire fracture defect. Failure to comply with the launch procedure and insufficient safety margin were judged as the cause of the rear rail deformation defect. Accordingly, the configuration was changed to remove each defect. Conclusion: The case of this study was conducted to eliminate defects in the launch system for UAV. The causes of defects were estimated through fault tree analysis. After the configuration change, Structural analysis and launch tests were performed to demonstrate the safety and effectiveness of the modified configuration. As a result, the effect of the modified configuration was verified.

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.843-853
• /
• 1997

The effect of dopant on microwave dielectric properties of (1-x)MgTiO3-xCaTiO3 ceramics, known to be used as microwave dielectric resonators for global positioning system and personal communication system, has been analyzed in terms of variations in defect concentrations and microstructural features with its addition. The addition of dopants was revealed to result in a significant change in the microstructure as well as defect concentration of the ceramics. For instance, the quality factor is proportional to sintered density of the ceramics by inversely proportional to grain size as well as vacancy concentration. Accordingly, it is believed that the dopant effect on the microwave dielectric properties should be separately analyzed with either microstructural change or the change in vacancy concentration.

• 한국동물위생학회지
• /
• 제41권2호
• /
• pp.63-69
• /
• 2018

This study was conducted to evaluate the effect of tuberculin test and associated various environmental factors on the quantity and quality of milk production of daily cows. The change of milk quantity followed to tuberculin test was investigated on 109 daily farms in south Gyeonggi, and the change of milk quality was also studied on 48 daily farms. The result of this study showed that the quantity and quality of milk production was decreased after tuberculin test (P<0.05). The amount of loss of the milk production due to tuberculin test was, however, only 0.92 L per cow. In terms of milk quality, the level of total protein was statistically significantly decreased. This study also showed that the milk quality was further decreased when the cows were restraint after veterinarians arrived compared to the case that cows were stayed restraint before the veterinarians visited the farm. In addition, milk quality and quantity were lowered worse when relative humidity of the location of tuberculin test was lower than 50% or higher than 70%, or when the milk production of a farm is higher than its quarter. This study showed that stress on daily cows and the farmers induces the decrease of milk yield and milk quality, and these losses can be minimized by regulating various environmental factors to the direction to maximize productivity.

• 한국대기환경학회지
• /
• 제28권5호
• /
• pp.581-594
• /
• 2012

The goal of this study is to investigate the effects of the chemical lateral boundary conditions (CLBCs) on Community Multi-scale Air Quality (CMAQ) simulations of tropospheric ozone for East Asia. We developed linking tool to produce CLBCs of CMAQ from Goddard Earth Observing System-Chemistry (GEOS-Chem) as a global chemistry model. We examined two CLBCs: the fixed CLBC in CMAQ (CLBC-CMAQ) and the CLBC from GEOS-Chem (CLBC-GEOS). The ozone fields by CMAQ simulation with these two CLBCs were compared to Tropospheric Emission Spectrometer (TES) satellite data, ozonesonde and surface measurements for May and August in 2008. The results with CLBC-GOES showed a better tropospheric ozone prediction than that with CLBC-CMAQ. The CLBC-GEOS simulation led to the increase in tropospheric ozone concentrations throughout the model domain, due to be influenced high ozone concentrations of upper troposphere and near inflow western and northern boundaries. Statistical evaluations also showed that the CLBC-GEOS case had better results of both the index of Agreement (IOA) and mean normalized bias. In the case of IOA, the CLBC-GEOS simulation was improved about 0.3 compared to CLBC-CMAQ due to the better predictions for high ozone concentrations in upper troposphere.

• 대한안전경영과학회지
• /
• 제22권2호
• /
• pp.1-6
• /
• 2020

Apples are one of the most produced fruits in Korea, with 2,423,000 tons of fruits produced in Korea in 2018, of which 365,000 tons (MAF, 2018) account for about 15% of the total production. For quality safety after harvesting apples, the application of MA(modified atmosphere) packaging technology (Mostofi et. al., 2008) is being actively studied. In addition, the effects of functional packaging materials that have added functions such as fireproof, antibacterial, high-blocking, degradability, and far-infrared radiation have been studied (Chung et al., 2009). In addition, there are reports of the effects of quality changes (Park et al., 2007) and MA storage methods on the quality of apples by packing apples with functional MA films((Park et al., 2004). But there are only few reports on quality safety by analyzing the correlation between the change of reducing sugar and total sugar and preference during storage by packing Geochang, Yeongju, and Yesan apples in functional MA film. Therefore, this study aims to propose a method to secure the quality safety of apples by investigating the effect of sugar change on the preference of apples during storage by packing apples in three regions in functional MA films.