• Journal of the Korea Institute of Building Construction
• /
• v.14 no.1
• /
• pp.11-20
• /
• 2014

This research examined the effect of the quality of aggregate on concrete workability and compressive strength through an investigation into regional aggregate used in domestic ready mixed concrete plants. Through the research, it was found that aggregate for ready mixed concrete shows poor quality overall. The main factor of deterioration in the quality of the concrete is the particle size of fine aggregate and fine particle content in coarse aggregate. The quality of aggregate significantly influences concrete's workability, which is defined based on 0.08mm passage related with powder and absorption. In addition, poor aggregate quality leads to increased water content in concrete to secure workability, which is related with a decline in the compressive strength and durability of concrete.

• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.6
• /
• pp.987-996
• /
• 2010

The purpose of this study was to measure customers' perception of the service quality of Korean restaurants and then compare differences in perceived service quality according to customer nationality. Self-administered questionnaires were completed by 2812 subjects, and data were analyzed by frequency, chi-square, t-test, one-way ANOVA, factor, reliability, cluster, and discriminant analysis. Results of the study were as follows. The factor analysis of perceived service quality produced four factors, employee service (5 variables), menu quality (4 variables), price & value (4 variables), and physical environment (4 variables). Cronbach's alpha values for reliability were over 0.8 for all factors. Further, a significant difference was observed in service quality, which was perceived according to customer nationality. A higher mean value of perceived service quality was held by foreigners when compared to Koreans. Especially, the mean value of perceived service quality was significantly low for all items for Japanese compared to foreigners. Cluster analysis divided subjects into two groups based on attitude toward service quality of Korean restaurants: an unfavorable group and favorable group. These two groups differed from each other in general characteristics as well. Limitations and future research directions are also discussed.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1405-1410
• /
• 2016

Background: The European Organisation for Research and Treatment of Cancer Quality of Life Questionnaire Bone Metastases Module (EORTC QLQ-BM22) is a recently designed supplement to EORTC Quality of Life Questionnaire-C30 (EORTC QLQ-C30). Additional psychometric properties, especially using confirmatory factor analysis (CFA) and the Rasch model, are warranted. Materials and Methods: A total of 573 patients with bone metastases were enrolled from eight countries with a mean${\pm}$SD age of $55.8{\pm}13.7years$. Slightly more than two thirds of them were female (n=383; 66.8%). CFA was used to examine the BM22 framework; Rasch models were applied to understand misfit items and differential item functioning (DIF). Results: The fit indices were satisfactory in CFA (comparative fit index=0.972, Tucker-Lewis index=0.964, root mean square error of approximation=0.076, and standardized root mean square residual=0.045). All items fit well in the Rasch models (mean square values were between 0.5 and 1.5), and only one item (number 17) displayed DIF across gender. However, there were six DIF items across Canada and Taiwan, ten across Canada and Iran, and six across Taiwan and Iran. Conclusions: The BM22 has satisfactory psychometric properties, and could assess the QoL of patients with bone metastases specifically focusing on their symptoms. Clinicians may want to use it to capture the underlying QoL for patients with bone metastases. However, the score of item 17 should be interpreted with caution when comparing male and female patients. In addition, researchers should note that variation in DIF items may occur when conducting an international study.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.9
• /
• pp.855-861
• /
• 2006

Sinterability and microwave dielectric properties of $xZWO_{4}-(1-x)TiO_{2}$ ceramic systems with zinc-borosilicate glass and $TiO_{2}$ contents for LTCC(Low Temperature Co-fired Ceramics) were investigated. The addition of $3{\sim}10\;wt%$ ZBS glass ensured the sinterability below $900^{\circ}C$. In general, increasing ZBS glass content seemed to enhance the sinterability, but the quality factor($Qxf_{0}$) significantly decreased due to the formation of an excessive liquid and second phases. As for the addition of $TiO_{2}$, the dielectric constant(${\varepsilon}_{r}$) and temperature coefficient of resonant frequency(${\tau}_{f}$) showed to increase, while the quality factor($Qxf_{0}$) did not show an apparent change. The composition of $0.7xZnWO_{4}-0.3TiO_{2}$ ceramics sintered at $900^{\circ}C$ with 5 wt% ZBS glass demonstrated 21.6 in dielectric constant(${\varepsilon}_{r}$), 14,800 in quality factor($Qxf_{0}$), and $+5\;ppm/^{\circ}C$ in temperature coefficient of resonant frequency(${\tau}_{f}$).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.6
• /
• pp.524-530
• /
• 2006

$xCa(Li_{1/4}Nb_{3/4})O_{3}-(1-x)CaTiO_{3}$ ceramics were sintered under the presence of zinc-borosilicate(ZBS) glass and resultant microwave dielectric properties were investigated with a view to applying the composition to low-temperature co-fired ceramic(LTCC) technology. The addition of $5{\sim}15wt%$ ZBS glass ensured successful sintering below $900\;^{\circ}C$. In general, increased addition of ZBS glass increased sinterability but it decreased the quality factor($Q{\times}f_{0}$) significantly due to the formation of an excessive liquid and second phases. As for the addition of $CaTiO_3$, the dielectric constant(${\epsilon}_r$) and temperature coefficient of resonant frequency(${\tau}_f$) increased, while the quality factor($Q{\times}f_{0}$) did not show an apparent change. The sintered $0.9Ca(Li_{1/4}Nb_{3/4})O_{3}-0.1CaTiO_{3}$ specimen at $900\;^{\circ}C$ with 10 wt% ZBS glass demonstrated 39.6 in dielectric constant(${\epsilon}_r$), 4,400 in quality factor$(Q{\times}f_{0}),\;and\;-11ppm/^{\circ}C$ in temperature coefficient of resonant frequency(${\tau}_f$).

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.3
• /
• pp.88-96
• /
• 2000

The objective of this study is to evaluate the preference and visual characteristic of users according to the location of benches at urban community parks. The types of benches are separated into four patterns and located in four representative places at urban community parks. Each relations between visual preference and adjective related factors are calibrated by the estimated results of Pearson correlation coefficient. Moreover, the factors which affect the visual preference are obtained by multiple regression analysis and to calibrate the each factors significant level, the method of multivariate variance analysis is applied. The results of this study are summzrized as belows: 1. Four types of factors which consist the visual characteristic are classified as emotional factor of visual images(aesthetic factor(F1), texture related factor(F2)) and physical factor(physical factor(F3), transformable factor(F4)). Each factor's eigenvalue is appears as 5.27∼1.78 and the eigenvalue of emotional factor of visual images is more higher than the physical factor. 2. The correlation coefficient between visual preference according to the location of benches(X21) and aesthetic factor(f1) is estimated as 0.79, which is highest value among the four factors. And the correlation coefficient of texture related factor(f2), physical factor(F3) and transformable factor(F4) is estimated as 0.14, 0.04 and 0.08 respectively. 3. The visual preference of users according to the location of benches is greatly affected by the emotional factor of visual images(F1, F2) and the physical factor(F3, F4) are poorly related. The results of this study suggest the effective guidelines for the location of leisure facilities. Moreover the design and planning of leisure facilities at the urban community park have to be reexamined. What must be examined from now on is as follows: First, the preference research of rest facilities in the urban park through the multiple approach must be carried out continuously. Second, the research about the visual quality of the environmental sight observed in sitting on the bench as well as the visual quality of the showed object and place needs to be supported. Nevertheless, through this study the utilization into the useful data of the plan and the design for the systematic disposition of landscape architecture equipments centered on the users can be expected.

• Journal of Biosystems Engineering
• /
• v.36 no.1
• /
• pp.23-32
• /
• 2011

In this work, the finite element method was used to investigate the shifts of resonance frequencies and quality factor of whispering-gallery-mode (WGM) for an opto-fluidic ring resonator (OFRR) biosensor. To describe the near-field radiation transfer, the time-domain Maxwell's equations were employed and solved by using the in-plane TE wave application mode of the COMSOL Multiphysics with RF module. The OFRR biosensor model under current study includes a glass capillary with a diameter of 100 mm and wall thickness of 3.0 mm. The resonance energy spectrum curves in the wavelength range from 1545 nm to 1560 nm were examined under different biosensing conditions. We mainly studied the sensitivity of resonance shifts affected by changes in the effective thickness of the sensor resonator ring with a 3.0 mm thick wall, as well as changes in the refractive index (RI) of the medium inside ring resonators with both 2.5 mm and 3.0 mm thick walls. In the bulk RI detection, a sensitivity of 23.1 nm/refractive index units (RIU) is achieved for a 2.5 mm thick ring. In small molecule detection, a sensitivity of 26.4 pm/nm is achieved with a maximum Q-factor of $6.3{\times}10^3$. These results compare favorably with those obtained by other researchers.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.7
• /
• pp.419-423
• /
• 2015

Sintering, microstructure, thermal conductivity and microwave dielectric properties of xLiF-(1-x)MgO ceramics (x=0.03~0.10 mol) were investigated. The high density was obtained in the specimens of $x{\geq}0.06$, i.e., 0.04 LiF-0.96 MgO in mol, whereas the amount of 0.03 mol LiF was insufficient to densify. From the result that the contact flattening in the sintered specimen was observed, the densification occurred through the liquid-phase sintering. The specimen of x=0.06 showed the highest room-temperature thermal conductivity. Relative density, thermal conductivity, dielectric constant, and quality factor ($Q{\times}f$) of the specimen for x=0.06 sintered at $900^{\circ}C$ for 4 h were 97.8%, $39.2Wm^{-1}K^{-1}$, 9.45, and 14,671 GHz, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.234-237
• /
• 2000

In this paper, the structural, dielectric and piezoelectric properties of the Pb[(S $b_{1}$2/N $b_{1}$2/)$_{0.035}$- $_Mn_{1}$3/N $b_{2}$3/)$_{0.065}$-(Z $r_{0.49}$, $Ti_{0.51}$)$_{0.90}$] $O_3$ ceramics were investigated with respect to the variation of the milling time. Grain size was decreased as the increase of milling time. As the milling time is increased, the particle size of the powder was decreased. Dielectric constant and electromechanical coupling factor (Qm)were slowly increased with the increase of milling time. The highest value of Qm was 1,497 at milling time 8 hour. Temperature coefficient of resonant frequency(TC $F_{r}$) was moved to positive side with the increase of milling time.e.e.e.e.e.e.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.3
• /
• pp.374-381
• /
• 2015

This study aimed to evaluate the effects of vitamin E (VE), ferulic acid (FA) and their combination supplementation on meat quality and antioxidant capacities of finishing pigs. Sixty barrows were randomly allocated to four experimental diets using a $2{\times}2$ factorial arrangement with 2 VE supplemental levels (0 or 400 mg/kg) and 2 FA supplemental levels (0 or 100 mg/kg) in basal diets. After 28 days, six pigs per treatment were slaughtered. The results showed that VE supplementation increased loin eye area of pigs (p<0.05) and FA supplementation increased $pH_{45min}$ value (p<0.05). The interaction of $FA{\times}VE$ was observed in shear force of longissimus dorsi muscle (p<0.05). Moreover, supplementation with VE decreased hepatic and sarcous malondialdehyde (MDA) content, increased hepatic glutathione (GSH) content and sarcous glutathione peroxidase (GSH-Px) activity (p<0.05). Additionally, supplementation with FA increased hepatic GSH-Px activity and decreased sarcous MDA content (p<0.05). However, dietary treatment did not affect the expression of genes related to nuclear factor, erythroid 2-like 2 (NFE2L2) pathway. These results suggest that dietary FA and VE could partially improve meat quality and antioxidant capacity of finishing pigs, but not by activating NFE2L2 pathway under the normal conditions of farming.