• ETRI Journal
• /
• v.34 no.4
• /
• pp.617-620
• /
• 2012

The denoising mapping with the closest-neighbor clustering (CNC) method in denoise-and-forward two-way relay channels is studied. Specifically, the symmetry of the constellations in source terminals A and B is utilized to reduce the complexity of the CNC method. The specific case considered first to illustrate how the constellation symmetry works in the CNC method is the quadrature phase-shift keying constellation in A and B and the single-antenna deployment in all terminals. This case study shows that an enormous complexity reduction can be achieved. Next, the result is extended to multiple-antenna scenarios and square quadrature amplitude modulations.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.165-168
• /
• 2006

최근 디지털 변복조 방식에서 추가적인 전송률 증가를 통하여 기존 시스템의 성능개선 및 서비스의 유연성 확보를 위해 계층변조에 대한 연구가 활발하다. 기존의 QAM(quadrature amplitude modulation)계열의 계층변조 방식은 이미 많은 연구를 통해 분석되고 응용되고 있지만 차분변조 방식을 취하고 있는 DQPSK(differential quadrature phase shift keying) 방식에 대한 계층변조 기법은 아직까지 선행연구가 활발히 진행되지 않았다. 본 논문에서는 DQPSK방식에 가능한 계층변조기법을 성상에 따라 분석하고 DQPSK방식에 가장 적합한 계층변조기법을 도출한다.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.113-116
• /
• 2000

Phase noise of oscillator gives the performance degradation significantly when a high carrier frequency and low transmission rate are used. The BER(Bit Error Rates) degradation of QPSK(Quadrature Phase Shift Keying) transmission is analyzed with the oscillator phase noise level specified in downstream physical interface of LMDS(Local Multipoint Distribution Services) which is described in DAVIC(Digital Audio Visual Council). The model used for the phase noise is a power-law model. We also investigated the effects of the various transmission rates on system performance. For the transmission rate below 0.5 Mbps, the BER performance is severely degraded and we verified that the transmission rate, 20 Mbps, is adequate for the downstream of LMDS systems.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1229-1236
• /
• 2016

In underwater acoustic multipath channel, a performance of underwater acoustic (UWA) communication systems is affected by dynamic variation of boundary and high temporal and spatial variability of the channel conditions. Time and spatial variations of UWA channel induce a carrier frequency offset (CFO) since a phase and a frequency of received signal mismatch with a transmitting signal. Therefore, a performance of a phase shift keying underwater acoustic communication system is degraded. In this study, we have analyzed a performance of CFO estimation and compensation using a phase code in time and spatial variation channel. A constant amplitude zero autocorrelation (CAZAC) signal is applied as a phase code signal and its performance is evaluated in water tank. The bit error rate of a quadrature phase shift keying (QPSK) system with a phase code is improved about 4 to 10 times better than that without a phase code.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.342-349
• /
• 2008

Multipath makes clear message transfer difficult in the underwater communication. To solve this problem, we propose a new method producing proper MFSP (Modulation Frequency Shift Period) which could be obtained by calculating time delay caused by different path from a transmitter to a receiver. At the transmitter end, messages were divided according to the size of the MFSP and transmitted accordingly alternating Frequency. At the receiver end, the received messages were demodulated in order to recover the original message by the adaptive BISMO algorithm which is constructed at the algorithm design stage. Adaptive MFSP and estimated BER (Bit Error Rate) were calculated through simulation test.

• ETRI Journal
• /
• v.26 no.3
• /
• pp.229-240
• /
• 2004

This paper reports on our development of a dual-mode transceiver for a CMOS high-rate Bluetooth system-onchip solution. The transceiver includes most of the radio building blocks such as an active complex filter, a Gaussian frequency shift keying (GFSK) demodulator, a variable gain amplifier (VGA), a dc offset cancellation circuit, a quadrature local oscillator (LO) generator, and an RF front-end. It is designed for both the normal-rate Bluetooth with an instantaneous bit rate of 1 Mb/s and the high-rate Bluetooth of up to 12 Mb/s. The receiver employs a dualconversion combined with a baseband dual-path architecture for resolving many problems such as flicker noise, dc offset, and power consumption of the dual-mode system. The transceiver requires none of the external image-rejection and intermediate frequency (IF) channel filters by using an LO of 1.6 GHz and the fifth order onchip filters. The chip is fabricated on a $6.5-mm^{2}$ die using a standard $0.25-{\mu}m$ CMOS technology. Experimental results show an in-band image-rejection ratio of 40 dB, an IIP3 of -5 dBm, and a sensitivity of -77 dBm for the Bluetooth mode when the losses from the external components are compensated. It consumes 42 mA in receive ${\pi}/4-diffrential$ quadrature phase-shift keying $({\pi}/4-DQPSK)$ mode of 8 Mb/s, 35 mA in receive GFSK mode of 1 Mb/s, and 32 mA in transmit mode from a 2.5-V supply. These results indicate that the architecture and circuits are adaptable to the implementation of a low-cost, multi-mode, high-speed wireless personal area network.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.26-30
• /
• 2016

In this paper, an inter-orthogonal frequency division multiplexing (OFDM) sub-carrier distortion due to fiber chromatic dispersion is investigated. The fiber chromatic dispersion induces phase difference among OFDM sub-carriers, resulting in non-symmetric peak to average power ratio (PAPR) inducing inter-OFDM distortion. Experiments to confirm the fiber dispersion are performed in a direct-detection optical front-haul link. Quadrature phase shift keying (QPSK) encoded OFDM symbols at 25 Gbit/s are transmitted over 100 km fiber and the resulting error vector magnitude (EVM) of 40 % is observed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.19-29
• /
• 2008

Underwater acoustic(UWA) communication is one of the most difficult field in terms of severe channel environments such as multipath propagation, high temporal and spatial variability of channel conditions. Therefore, it is important to model and analyze the characteristics of underwater acoustic channel such as multipath propagation, transmission loss, reverberation, and ambient noise. In this paper, UWA communication channel is modeled with a ray tracing method and applied to image transmission. Quadrature phase shift keying(QPSK) and multichannel decision feedback equalizer(DFE) are utilized as phase-coherent modulation method and equalization technique, respectively. The objective is to improve the performance of the image transmission using vertical sensor array instead of single sensor in the viewpoint of bit error rate(BER), constellation diagram, and received image quality.

• Journal of Sensor Science and Technology
• /
• v.9 no.6
• /
• pp.416-423
• /
• 2000

A new demodulation technique which can be used for the fiber optic acoustic sensor system using Sagnac interferometer is described. The theoretical limitation in dynamic range of the quadrature demodulation technique can be removed by the proposed BPSK(Binary Phase Shift Keying) demodulation technique. Full demodulation of input acoustic signal is possible with just simple electronics by eliminating the necessity of the high frequency phase modulation. This technique is suitable for digital signal processing of fiber optic sensor systems and can be applicable for other interferometers.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.110-113
• /
• 2004

Underwater acoustic(UWA) communication is one of the most difficult field because of several factors such as multipath propagation, high temporal and spatial variability of channel conditions. Therefore, it is important to model and analyze the characteristics of underwater acoustic channel such as multipath propagation, transmission loss, reverberation, and ambient noise. In this paper, UWA communication channel is modeled with a ray tracing method and applied to image transmission. Quadrature phase shift keying(QPSK) and multichannel decision feedback equalizer(DFE) are utilized as phase-coherent modulation method and equalization technique, respectively. The objective is to improve the performance of vertical sensor array than that of single sensor in the viewpoint of bit error rate(BER), constellation output, and received image quality.