• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.128-131
• /
• 2006

There are two traditional scheduling methods known as PQ and WRR in the DiffServ network, however, these two scheduling methods have some drawbacks. In this paper, we propose an algorithm that can be adopted in WRR scheduler with making up for weak points of PQ and WRR. The proposed algorithm produces the control discipline by the fuzzy theory to dynamically assigns the weight of WRR scheduler with checking the Queue status of each class. To evaluate the performance of the proposed algorithm, We accomplished a computer simulation using NS-2. In result, the proposed algorithm enhances the packet discard rate at the EF class than WRR scheduling method and the AF4 class than PQ scheduling method.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.97-106
• /
• 2003

In ARQ based error control, imperfect error detection leaves error remains on a packet. Aiming for a reduction of error remains in multicopy transmission ARQ system, we propose a rule of requesting a retransmission and deciding a correct copy, (identified as $(m, \;{\sigma})$rule). While the probability of error remains is reduced by the employment of the $(m, \;{\sigma})$ rule at multicopy transmission ARQ, delay and throughput performance may be degraded in comparison with those of conventional single copy transmission ARQ. Thus, we develop an analytical method to evaluate the performance trade-off in multicopy transmission ARQ following the $(m, \;{\sigma})$ rule. From the numerical results obtained by the analytical method, we investigate the effect of channel characteristics on the performance of error remains, packet loss, throughput, and packet delay, and confirm that the adaptability of the $(m, \;{\sigma})$ rule to conform to various QoS requirements with ease.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1081-1086
• /
• 2023

The rapid growth and increasing complexity of modern networks have highlighted the limitations of traditional network architectures. The emergence of SDN (Software-Defined Network) in response to these challenges has changed the existing network environment. The SDN separates the control unit and the data unit, and adjusts the network operation using a centralized controller. However, this structure has also recently caused a huge amount of traffic due to the rapid spread of numerous Internet of Things (IoT) devices, which has not only slowed the transmission speed of the network but also made it difficult to ensure quality of service (QoS). Therefore, this paper proposes a method of load distribution by switching the IP and any server (processor) from the existing data processing scheduling technique, RR (Round-Robin), to mapping when a large amount of data flows in from a specific IP, that is, server overload and data loss.

• IE interfaces
• /
• v.9 no.3
• /
• pp.168-179
• /
• 1996

Automatic repeated recalling from individual computing equipments such as PC and workstations, to access ATM networks may result in call overload to networks. Call overload causes to waste network resources and fail to meet user call processing QoS requirements. We evaluate two call connection request methods: the back-off recall method(BRM) which makes recall with random waiting time after rejection, and the direct recall method(DRM) which repeats call connection request whenever call request is rejected. We evaluate their performances by simulation and it shows that as the total number of attached terminals to each access node increases, BRM performs better than DRM in terms of the call acceptance level and effective network bandwidth utilization.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.4
• /
• pp.835-843
• /
• 2000

This paper presents a method to design the integrated system for supporting both multimedia contents creation and its presentation in a windows system. Especially, it describes techniques for designing an integrated editor that can be used to crate and edit various media data including continuous media such as audio and video. And it also proposes a system model for systematically integrating multimedia creation tool with multimedia presentation system where the buffering and scenario-based presentation methods are included in the propose system for supporting effective multimedia presentation through a network. Finally, we describe a threads processing technique based on event monitoring to satisfy needs for presentation control, synchronization control, and user's input control during a multimedia presentation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.384-389
• /
• 2005

The objective on this project is to develop a cooperative Field Robot (FR), by using a customize Open Control Platform (OCP) as design and development process. An OCP is a CORBA-based solution for networked control system, which facilitates the transitioning of control designs to embedded targets. In order to achieve the cooperation surveillance system, two FRs are distributed by navigation messages (GPS and sensor data) using CORBA event-channel communication, while graphical information from IR night vision camera is distributed using CORBA Asynchronous Method Invocation (AMI). The QoS features of AMI in the network are to provide the additional delivery method for distributing an IR camera Images will be evaluate in this experiment. In this paper also presents an empirical performance evaluation from the variable chunk sizes were compared with the number of clients and message latency, some of the measurement data's are summarized in the following paragraph. In the AMI buffers size measurement, when the chuck sizes were change, the message latency is significantly change according to it frame size. The smaller frame size between 256 bytes to 512 bytes is more efficient fur the message size below 2Mbytes, but it average performance in the large of message size a bigger frame size is more efficient. For the several destination, the same experiment using 512 bytes to 2 Mbytes frame with 2 to 5 destinations are presented. For the message size bigger than 2Mbytes, the AMI are still able to meet requirement far more than 5 clients simultaneously.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.799-806
• /
• 2004

A growing diversity of pervasive devices is gaming access to the Internet and other information. However, much of the rich multimedia contents cannot be easily handled by the client devices because of the limited communication, processing, storage and display capabilities. The in-tegration of voice, data and video service modified the target of networking technologies. Networks must have some the capabilities for in-tegration of various services and also for QoS support as required by each of those service. Because of these reasons, we developed EAGIS(Efficient ATM Gateway for real time Internet Service) to provide seamless multimedia service between the ATM network and the Internet. EAGIS consists of the interworking unit, content server, transcoding server, and the serveice broker to provide seamless multimedia service be-tween the ATM network and the Internet. In this paper, we design the architecture and transcoding service scenario of the EAGIS. When the RTP is used for the bi-directional communication, transcoding time is configured by the time-stamp of RTCP. When HTTP is used for unidirec-tional communication, self-timer is used. By using these reference time, standard transcoding method is applicable according to the frame trans-mission rate and network traffic load. And we can also assure the QoS of the multiple users` effective bandwidth by our algorithm.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.773-780
• /
• 2004

In this paper, we measured the transmission characteristics of a MPEG2 and a DV that are typical stream-type traffics on the very high speed network and carried out the subjective evaluation of end users for these stream-types. In the subjective evaluation of these stream-type data, video quality evaluation is based on ITU-R BT.500-1 and audio qualify evaluation is based on ITU-R BS.1116-1. Also experiment method to acquire the subjective evaluation of end users is selected the 5 grades method of DSCQS. Under the same condition, in case of MPEG2, the evaluation grade of the video and the audio duality becomes deteriorated at the load rate of $54\%$ that network traffic increases rapidly. In case of DV the evaluation grade of video duality began decrease, but the degree of the change was slower than MPEG2 at the same load rate. Moreover the subjective evaluation grade of end users was superior to load rate $70\%$ in case of DV audio quality, traffic and QoS control that consider the subjective evaluation of end user is required. Conclusively, in case of MPEG2, we can perform traffic control that only use the actual measurement values on the network. However in case of DV, we can perform traffic control that the actual measurement values on the network and the subjective evaluation of end users are considered at the same time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1067-1072
• /
• 2014

As the service continuity of mobile multimedia service is affected by packet loss and delay, the efficient handover control is essentially required. This paper proposes a handover admission control scheme to satisfy service continuity of mobile multimedia services in LTE-Advanced System. In this method, based on context information of mobile terminal and base station changes, the sequence diagrams between the function modules for controlling new sessions and ISHO sessions are proposed. Simulation is done for performance analysis with the measure of transmission delay and packet loss rate.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.28 no.2
• /
• pp.75-89
• /
• 2003

Media Access Control (MAC) Protocol in IEEE 802.11 Wireless LAN standard supports two types of services, synchronous and asynchronous. Synchronous real-time traffic is served by Point Coordination Function (PCF) that implements polling access method. Asynchronous nonreal-time traffic is provided by Distributed Coordination Function (DCF) based on Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) protocol. Since real-time traffic is sensitive to delay, and nonreal-time traffic to error and throughput, proper traffic scheduling algorithm needs to be designed. But it is known that the standard IEEE 802.11 scheme is insufficient to serve real-time traffic. In this paper, real-time traffic scheduling and admission control algorithm is proposed. To satisfy the deadline violation probability of the real time traffic the downlink traffic is scheduled before the uplink by Earliest Due Date (EDD) rule. Admission of real-time connection is controlled to satisfy the minimum throughput of nonreal-time traffic which is estimated by exponential smoothing. Simulation is performed to have proper system capacity that satisfies the Quality of Service (QoS) requirement. Tradeoff between real-time and nonreal-time stations is demonstrated. The admission control and the EDD with downlink-first scheduling are illustrated to be effective for the real-time traffic in the wireless LAN.