• Journal of computational fluids engineering
• /
• v.4 no.1
• /
• pp.41-52
• /
• 1999

이 논문에서는, QUICK해법의 불안정성을 개량하므로써, 수치계산에 있어서 수렴이 빠르고, 수치적으로 안정한 계산을 할 수 있는 새로운 MQUICK 상류해법을 제안하고, 이를 비압축성 층류유동의 계산에 적용하였다. 또한, 해법의 정확성, 안정성, 수렴속도에 대한 검토를 통하여 본 MQUICK 상류해법의 유효성과 타당성이 평가되었다. 이 해법에서는 인공산일의 가감을 조절하기 위하여 가중계수 α를 써서 정식화 하였고, 위의 검토를 통하여 α의 최적값을 조사하였다. 이 해법을 SMAC 음해법에 적용하여 2 차원 공동유동, 3 차원 덕트유동과 같은 몇몇 표준문제를 계산하고, 계산된 결과를 실험값 또는, 3 차 정확도의 상류해법 및 QUICK해법에 의한 결과 들과 비교 하므로써, 본 MQUICK 상류해법이 위의 다른 해법에 비하여 안정하고, 유효성이 높은 해법임을 확인 하였다.

• Journal of the KSME
• /
• v.26 no.2
• /
• pp.138-144
• /
• 1986

지금까지 몇가지의 차등법들을 계산의 정확도 및 안정성에 관하여 검토하였다. 상류 차등법과 왜도 차등법은 좋은 안정성을 가지고 있으나 그 정확도가 미흡한게 결점이고 중앙 차등법은 비 교적 좋은 정확드를 가지고 있으나 불안정한게 큰 결점이다. QUICK 차등법의 경우에는 보다 정확한 수치해를 얻기위해 종속 변수를 보다 고차의 근사치로 표시하였는데 정확도가 증가함에 따라 몇가지의 불이익이 생기게 된다. 그 불이익으로는 제일 먼저 계산 비용의 증가를 들 수 있으며 수치 계산이 불안정하게 되고 경계 조건의 표시가 어려워 진다. 또한 난류 에너지 방 정식과 같이 종속 변수가 반드시 양수값을 갖는 방정식에서 그 차등방정식의 종속 변수도 양수 치를 가져야 한다는 제한 조건을 만족시키는데 일반적으로 어려움이 많다. 그 이유는 QUICK 차등법을 이용한 차등방정식은 흔히 음수치의 원천항을 갖기 때문에 차등방정식을 푼 후 그 종속 변수가 음수치를 갖기 때문이다. 아직도 고차의 정확도를 갖는 차등법이 연구 개발중이며 종속 변수가 반드시 양수치인 유동방정식을 푸는 좋은 차등법은 아직까지도 없는 실정이어서 2차 이 상의 정확도와 절대 안정성 (absolute stability)을 갖는 새로운 차등법의 개급이 시발하다 하겠다.

• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.348-356
• /
• 1996

A mobile CARS spectrometer is constructed to measure the instantaneous temperature of gases, of which software include the quick fit methods and a least square fitting method to obtain temperatures from the spectra. Two quick-fit-methods give smaller variance of temperatures than the least square fitting method even though they consume much shorter time to yield temperatures. The precision and accuracy of CARS temperature is measured in the graphite tube blackbody furnace in reference to a radiation pyrometer. The accuracy of the CARS temperature is $\pm$2% from 1000K to 2400K and the precision is $\pm$35K at 1600K with the most accurate quick-fit-method. As a demonstration of the instantaneous measurement, the spectrometer is applied for measurement of the turbulent combustion at a certain condition. eograms(HS) are made using a relatively small number of synthesized 2D images. The influence of aliasing artifacts caused by insufficient or improper sampling is presented, and a new sampling theory is proposed, which is used to making holographic stereograms. Also, the optical system for extension of viewing distance and viewing zone is proposed. Results of this analysis can be applied to design normal holographic stereograms and computer based holographic stereograms.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.4
• /
• pp.19-30
• /
• 2000

A finite-volume method is developed to solve turbulent flows around modern commercial hull forms with bow and stern bulbs. The RANS equations are solved. The cell-centered finite-volume method employs QUICK and central difference scheme for convective and diffusive flux discretization, respectively. The SIMPLEC method is adopted for the velocity-pressure coupling. The developed numerical methods are applied to calculate turbulent flow around KRISO 3600TEU container ship. Surface meshes are generated into five blocks: bow and stern bulbs, overhang, fore and afterbody. 3-D field grid system with O-H topology is generated using elliptic grid generation method. Surface friction lines and wake distribution at propeller plane is compared with experiment. The calculated results show that the present method can be used to predict flow around a modern commercial hull forms with bulbs.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.4
• /
• pp.1376-1384
• /
• 1996

Measuring the velocity of fluid flow, semiconductor flow sensors are widely used in the various fields of engineering and science such as the semiconductor manufacturing processes and electronic control engines for automobiles. In the near future, this type of sensors will replace present hot wire type sensors or other type flow sensor due to its low price, easy handling and small size. To develop the advanced semiconductor flow sensor, it is necessary to obtain characteristics of the flow and the heat transfer around the sensor in advance. In the present study, the theoretical analysis including mathematical modeling and numerical calculation to predict the characteristics of heat transfer and flow field around the sensor was carried out. The main parameters for optimum design of the flow sensor are the free stream velocity, the heat generation rate of silicon arm and the distance between arms. Effects of these parameters on flow and heat transfer around the sensor and the temperature difference between arms are examined.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.99-99
• /
• 2011

최근에 미국에서 출범한 수질 교환 법은 수질기준을 혁신적인 접근방법으로 만족시키는 법이다. 이 법안은 수질기준을 초과하지 않는 조건에서 한 유역 안 다른 지점들의 점 오염과 비점오염 배출의 교환을 허용한다. 이 법안을 적용하기 위한 방법을 도출하기 위하여 많은 시험 프로그램을 운영하고 있지만 여전히 실제 교환은 상대적으로 적게 이루어지고 있다. 또한 하천내의 비 점오염량의 불확실성으로 인하여 교환 지점을 선정하고 적용하는 데에 큰 어려움이 있다. Hydrological Simulation Program-Fortran (HSPF)은 Soil and Water Assessement Tool (SWAT)과 함께 미국 하천 모델링에 많이 쓰이는 유역 모델로써 특히 HSPF는 각각의 토지 피복도의 퍼센트 투수량을 지정함으로써 도시지역의 유출량을 시뮬레이션 하는데 강점이 있다. 미국 중서부 미조리 주의 퍼시픽시를 포함하고 있는 Brush Creek 유역을 선택하여 퍼시픽시의 도시화 증가로 인한 Brush Creek 유역의 상류와 하류지역의 유출량 및 Sediment 변화를 예측하여 수질관리법을 적용하는 방법을 연구하였다. 이 연구의 특징은 원격탐사 이미지 (QuickBird)로 구현한 최근의 토지 이용을 미래의 도시지역으로 전환한 토지이용도를 사용함으로서 특정 유역을 가장 정확하게 이해하는 시뮬레이션을 가능하도록 한다는 점이다. 각각의 토지이용에서 도시화가 3가지의 강도를 가지고 진행된다는 시나리오를 이용하여 모델링을 하였고 이로 인해 계산된 유출량과 Sediment 양을 이용하여 각각의 토지이용 변화 별 수질 교환단위를 도출 하였다.

• Proceedings of the KIEE Conference
• /
• 2007.11c
• /
• pp.183-186
• /
• 2007

Realistic deformation of computer simulated anatomical structures is computationally intensive. As a result, simple methodologies not based in continuum mechanics have been employed for achieving real time deformation of virtual reality. Since the graphical interpolations and simple spring models commonly used in these simulations are not based on the biomechanical properties of tissue structures, these "quick and dirty"methods typically do not accurately represent the complex deformations and force-feedback interactions that can take place during surgery. Finite Element(FE) analysis is widely regarded as the most appropriate alternative to these methods. However, because of the highly computational nature of the FE method, its direct application to real time force feedback and visualization of tissue deformation has not been practical for most simulations. If the mathematics are optimized through pre-processing to yield only the information essential to the simulation task run-time computation requirements can be drastically reduced. To apply the FEM, We examined a various in verse matrix method and a deformed material model is produced and then the graphic deformation with this model is able to force. As our simulation program is reduced by the real-time calculation and simplification because the purpose of this system is to transact in the real time.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.331-336
• /
• 2001

Theoretical approach was taken to the whole CNG refueling process. In particular, this study was focused on the prediction of flow rate at any given piping configuration of CNG system, in order that a simulation program for the CNG refueling system should be developed. The simulation result of refueling process was compared with experimental result obtained from various kinds of fueling configuration. The simulation results showed a satisfactory agreement within 10% errors in fueling time, fueling amount, and residual pressure. The developed program would be used a good engineering tools for estimating fueling performance for a any given CNG station.

• Tunnel and Underground Space
• /
• v.19 no.2
• /
• pp.107-122
• /
• 2009

Insufficient reinforcement for maximizing payability and benefits in mining cavities causes subsidence problems and it threatens residents' lives and properties. So many reinforcement management methods are developed and now various methods are being applied in the field. Among them, a filling method which sends reinforcement materials in the cavities is used extensively. However, domestic geological condition and coal mining methods are so complicate that make many steep cavities. Because of those problems, it is difficult to apply foreign methods directly, which is valid for horizontal cavities. In this study, the injection volume of quick setting grouting material which is developed for filling cavities in domestic condition and the shape of consolidated bodies are investigated. And a programming method for estimating proper injection amounts of filling materials is proposed. The results are verified by numerical analysis using UDEC.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.5
• /
• pp.317-325
• /
• 2003

The vibration, which often occurred in a two inertia motor system, makes it difficult to achieve a quick response of speed and disturbance rejection. This paper provides an autonomous pole assignment technique for three kinds of speed controllers (I-P, I-PD, and State feedback) using GAs(Genetic Algorithms) for a two-inertia motor system. Firstly, the optimal parameters are chosen using GAs in view of reducing overshoot and settling time, then those are used in computing the gains of each controller. Some simulation results verify the effectiveness of the proposed design. The proposed controller is expected to be the autonomous design way for controlling a two-inertia motor system with flexible shaft.