• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.6
• /
• pp.66-78
• /
• 2003

The purpose of this study was to minimize the forest disturbance around an entry road of a power transmission tower construction site between Taean and Sinsesan, Chungnam. The main study field was classified into existing materials and a GIS, remote sensing analysis, and a field examination. This information was used to identify the most suitable entry road using a degree of green naturality map, eco-naturality map, actual vegetation map, and a forest state map as the existing materials. Also, the study used an normalized difference vegetation index, altitude and slope map in order to make the evaluation materials which used an remote sensing image, and GIS. This data was used to choose an optimum area, and diagnosed the current condition of the vegetation with a field survey of the area. It analyzed vegetation structure, species diversity, the age of trees in a field examination. Subsequently, we proposed four area types based on the analysis results--preservation area, transplantation area, restoration area and development area. As a result, the preservation area was categorized into 8 grades, according to the degree of green naturality, large area of breast diameter at Pinus densiflora community, competition area of Pinus densiflora and Quercus spp. and Quercus spp. community of over 20 years old. A transplantation area established 46 optimum areas according to the GIS analysis and vegetation investigation results. Vegetation restoration plan for disturbance area should be made based on ecological value of existing vegetation to worthwhile area as Quercus spp. mixing forest proposed. The development area selected a ecological worthless place as an artificial forest where Pinus densiflora and Pinus thunbergii growth is poor. This research results suggest that restoration of vegetation will be possible in the real world. Also, ecological restoration guidelines will be made through building and analyzing data base and routine monitoring of transplantation and restoration area.

• Journal of the Korean Wood Science and Technology
• /
• v.16 no.2
• /
• pp.90-97
• /
• 1988

The rate of utilization of the oak cork (bark of Quercus variabilis Blume) ranges only 40-50%. Therefore, this study was carried out to investigate the chemical properties of the oak cork for increasing the utility. 1) The contents of alkali extractives, organic solvent extractives and ash in the oak cork are similar to those of other barks, but hot and cold water extractives and lignin contents are lower than those of the wood. The carbohydrate (cellulose and hemicellulose) content of the oak cork is similar to that of other barks. The suberin contents in the first and the second bark of the oak cork are 34.8 and 32.2% respectively, in the dry weight. 2) Inorganic component contents of the first bark are similar to those of the second. The pH of the first and the second bark are 3.9 and 4.2%. The caloric values of the first and second bark are 6,263 Kcal/kg, and 5,828 Kcal/kg, respectively, and these caloric values are higher than those of other barks. The sclerencymatous cell content of the first bark which is related to the quality of the oak cork is lower than that of second bark, the contents of the sclerenchymatous cell and lignin show the positive correlation. 3) In the dimension of the cross sectioned cork cell, the first bark is bigger than that of the second. The shape of the cork cell is globular shape in the early bark and discoid shape in the late bark. The cross and the radial section are the same shape, but the tangential section shows difference from the other section.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.91-99
• /
• 2001

In this study the possibility of classifying wood surface defects by image processing technique was investigated. An algorithm for the classification of wood surface defects, such as knot, check, and bark, on three Korean domestic species, Pinus densiflora, Quercus acutissima, and Carpinus laxiflora was also developed. Filtering was executed to separate dummies from the labels including real defect. Error rates in classifying knots on Pinus densiflora and Quercus acutissima were lower than 1% and error rates. In classifying check and bark in Quercus acutissima and Carpinus laxiflora could be lowered to below 13%.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.2
• /
• pp.100-108
• /
• 2001

An understanding of potential lumber cutting yields may lead to increased utilization of the lower grades of lumber in wood industry. Computer simulations of rough-mill operations require a lumber database as input to give reasonable estimates of such yields. The lumber database must contain detailed information regarding the location and type of defects, and then all manufacturing sequences can be tested with the same raw material. However, no suitable lumber database with mapped defects exists for Korean wood industry. In this study lumber databases of Pinus densiflora S. et Z and Quercus acutissima which are the main Korean domestic species were developed to prepare for coming era of "utilization of domestic species" in the near future. These databases were put into lumber cut-up simulation model(gang-rip-first simulator) to investigate the part yields. Gang-rip first simulation showed average part yields of 44.75% and 63.10% for Quercus acutissima and Pinus densiflora lumber database developed, respectively. In most cases process set-up of fixed blade best feed showed the best part yields and the level of acceptable defects could not make significant differences in part yields.

• Korean Journal of Environment and Ecology
• /
• v.8 no.2
• /
• pp.154-159
• /
• 1995

The Chuwang valley-Kumunkwangi valley forest in Chuwangsan area was studied to investigate forest structure in relation to altitude and part of slope. Forty eight quadrats were set up in the valley forest along altitude of 470m to 780m and part of the slope. Density and basal area of trees in tree strata decreased as increasing elevation. With increasing elevation the importance values of Quercus mongolica, Fraxinus rhynchophylla increased, while those of Pinus densiflora, Lindera obtussiloba decreased. As going from lower part to upper part of the slope, the importance values of Quercus valiabilis and Lindera obtussiloba increased while those of Fraxius rhynchophylla, Acer mono decreased. Species diversity tended to decreased as going to upper parts of the slope. The range of similarity indices between elevation belts, and parts of the slope were 74.4~84.2% and 68.0~96.3%, respectively. According to importance value and cluster analysis, the studied valley forest was classified into three forest communities of Pinus densiflora-deciduous tree species community of lower part of slope, Pinus densiflora-Quercus variabilis community of middle and upper part of slope, Pinus densiflora community of the top area.

• Korean Journal of Environment and Ecology
• /
• v.23 no.2
• /
• pp.151-160
• /
• 2009

To investigate the vegetation structure of the section from Naesosa to Naebyonsan district, thirty plots which Size is $100m^2$ were set up in the Byeonsan Peninsula National Park. According to the classification(TWINSPAN) and ordination(DCA) analysis which were used for community division, the plots are appeared in uncontiguity with each ones. At the end of classification analysis, the community was divided into the four groups of Pinus densiflora(I), Pinus densiflora-Quercus serrata(II), Zelkova serrata-Rhamnella frangulioides(III) and Aphanaghe aspera-Rhamnella frangulioides community(IV). Through the results, Pinus densiflora community coast-sided will be going with status quo, but Pinus densiflora-Quercus serrata community inland-sided will progress toward Q. serrata dominated community. It was turned out that the forest of the Byeonsan Peninsula National Park is about over 40-year-old through tree ring analysis.

• Journal of Ecology and Environment
• /
• v.33 no.4
• /
• pp.299-306
• /
• 2010

The use of local seed provenance is often recommended in forest restoration. Early vigor is a combination of the performance of seed germination and emergence after planting. The ability of young Brant's oak plants to grow and develop after emergence and its dependence on local habitat conditions was investigated in this study. The effects of seed source and shade on early growing seedlings of Brant's oak (Quercus brantii L.) were determined in field measurements. Seeds of Quercus brantii L. were collected from 4 forest areas (seed sources) in southern Zagros (Provinces of Kohkilouyeh-Bouyer Ahmad and Fars) at altitudes of 850, 1,100, 1,500, 2,100 m a.s.l., and planted in a nursery constructed in southwestern Iran. According to a split-plot design consisting of four blocks, each containing two main treatment plots (no shading, partial shading), each main plot was sub-divided into four sub-plots (for elevations of 850, 1,100, 1,500 and 2,100 m). Results showed that shade treatments had significant effects on emergence percentage and rate, shoot length, shoot dry weight (SDW), root dry weight (RDW), leaf area (LA), and chlorophyll content. Ecological factors also had an effect on seed performance. Altitude of seed source had a very significant effect on root length, LA, SDW, and RDW. The seeds collected from 850 m a.s.l. elevation showed the highest performance, especially in leaf area, root length, shoot dry weight, and root dry weight. Our results showed that the altitude of 850 m a.s.l. was the best for collecting Brant's oak seeds.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.279-285
• /
• 2012

This study was conducted to offer preliminary data for forest management from March and December 2011. Based on the number of standing trees by DBH classes, it is recommended to practice thinning and pruning to change the current young stand to mature stand. In Livelihood Environment Forest Protected Areas, young (0-10 years or 0-10 cm DBH) and detected trees need to be removed and selected healthy trees need to be heavily tended. Also, selected trees in age 20-30 (20-30 cm DBH class) need to receive concentrated tending. Since Livelihood Environment Forest Protected Areas had been vulnerable for erosion, the diversity of understory layer is low. In order to diversify deciduous trees, it is recommended to introduce new species and thin and prune existing trees. It is not proper to adapt clear cutting in a short time and should be partially regenerated using shelter-wood method or proper tending practices to the Pinus rigida dominanted forest. Tending existing under-story species including Quercus alina, Quercus variabilis, and Quercus serrata would be important.

• Journal of Korean Society of Forest Science
• /
• v.67 no.1
• /
• pp.10-16
• /
• 1984

Containerized Quercus acutissima seedlings were inoculated with vegetative mycelial inoculum of Pisolithus tinctorius and were grown in a green-house. The ectomycorrhizal fungus, P. tinctorius (Pt) increased growth of the container-grown oak seedlings. Of three treatments, Pt inoculation stimulated remarkably primary lateral roots, shoot growth, and root collar diameter and leaf area development, compared with either non-inoculated or natural soil treatment. In addition, Pt-inoculated seedlings produced ectomycorrhizae, by 71.1 percent. However, noninoculated and naturally grown seedlings were free of natural ectomycorrhizal. Ectomycorthizal roots developed more abundantly in the middle portion of the container than in the top or bottom portions.

• The Korean Journal of Ecology
• /
• v.24 no.2
• /
• pp.111-115
• /
• 2001

Vegetational changes along elevational and topographical gradients were studied in Mt. Jumbong which is located at the core area of the Mt. Sorak Biosphere Reserve in Kangwon-do Province in central Korea. Two 500 m north-south transects crossing two valleys and a small ridge were laid out, and fifty-one 10 m$\times$10 m permanent quadrats were systematically set up. All trees bigger than 2.5 cm DBH were marked with numbered aluminum tags, and their DBH measured and the species identified. Coverage of plant species in the herb layer were determined in two 2 m $\times$ 2 m subquadrats in each of the permanent quadrats. Thirty-two species of woody plants occurred in the tree layer in the permanent quadrats studied. Quercus mongolica was the dominant species across the study site, and Acer pseudosieboldianum and Carpinus cordata were also important. Quercus mongolica occurred on the ridges and south-facing slopes, and Acer pseudosieboldianum occurred extensively except for valleys. In contrast, Fraxinus mandshurica, Acer mono, Acer triflorum, and Ulmus laciniata were common in valleys. At the herbaceous layer, 112 species were identified. Dominant species were Ainsliaea acerifolia and Sasa borealis on the ridges, Meehania urticifolia on north-facing slopes, and Deutzia glabrata on valleys. Soil environmental factors were compared among the quadrats. pH was lower in the quadrats located on ridges and south-facing slopes, and organic matter was lowest on south-facing slopes. Quadrats located on valleys were generally higher in pH, organic matter, N, P, K, Ca and Mg. DCA ordinations for tree layer and herb layer were carried out in order to identify the dominant environmental factors affecting the distribution of plant species along the environmental gradients. Correlation analysis between ordination axis scores and environmental factors showed that axis one was negatively correlated with elevation and positively correlated with soil organic matter, pH, Ca, Mg, and P, but that axis two was positively correlated with elevation. These results indicate that vegetation responds very sensitively to elevational and topographical gradients although the study area is relatively small with about 100 m in elevational variation.