• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.12-16
• /
• 2015

$(Na,K)NbO_3$-based piezoelectric ceramics were synthesized by a solid phase sintering method with various milling solvents. The solvents were varied with acetone, ethanol, and pure water to investigate the effect on the microstructure and electrical properties. NKN ceramics showed the maximum values of the relative density (94%), the mechanical quality factor (Qm: 78) and the electro-mechanical coupling factor ($k_p$: 0.25) at the ethanol solvent. It might mean that a solid phase sintering of the NKN piezoelectrics with a suitable solvent could improve the relative density and the piezoelectric properties.

• 한국표면공학회지
• /
• 제24권3호
• /
• pp.119-124
• /
• 1991

Recently, the trend of research in hard coating is concentrate on developing the process of ionization rate under low operating pressure, to get the thin film with high adhesion and dense microstructures. In this study ionization rate enhancement type PVD process using permanent magnet is developed, which enhances the ionization rate by confining the plasma suppressing the wall loss of electron. By the result to investigate the characteristic of glow discharge, the ionization rate of this process is enhanced about twice as high as that of triod BARE process (about 26%), and more dense TiN microstructures are obtained in this process. Cylindrical ion energy analyzer is made and attached in front of a quadrupole mass filter for the analysis of the energy distribution of reactive gas and activated gas ions from the plasma zone. To analyze the operation mechanism of ion energy analyzer, computer simulation is performed by calculation the electric field environment using finite element method. By these analyses of ion energy distribution of outcoming ions from the plasma zone, it is found that magnetic field enhances ion kinetic energy as well as ionization rate. The other results of this study is that the foundation of feed-back system is constructed, which automatically control the partial pressure of reactive gas. In can be possible by recording the data of mass spectrum and ion energy analysis using A-D converter.

• 전자통신동향분석
• /
• 제21권4호통권100호
• /
• pp.107-117
• /
• 2006

위성 탑재체 제조 산업은 기초 과학이 뒷받침된 초정밀 기계 공학, 첨단 전자 기술, 극한 환경 기술 및 신소재 공학 등과 같은 첨단 산업의 집합체라 할 수 있다. 현재 미국을 비롯한 서구 선진국에서 진행중인 탑재체 기술동향을 보면, 폭발적으로 증가하는 위성수에 따라 위성 궤도가 부족하고 주파수 자원이 고갈되고 있는 상황에서 통신 위성의 효율성과 성능을 향상시킬 수 있는 신호처리 탑재(OBP) 위성과 통신기능을 포함한 다양한 기능을 가진 복합위성 개발이 진행되고 있으며 주파수 대역의 포화와 광대역 멀티미디어 서비스 제공 등을 위해 보다 높은 주파수의 준 밀리미터파 대역(Ka 대역) 위성 개발이 활발히 이루어지고 있다. 국내에서는 현재, 2008년 발사를 목표로 마이크로스위치 매트릭스(MSM)가 탑재되어 빔간 스위칭이 가능하도록 설계된 통신해양기상위성(COMS)용 통신 탑재체(SACOM) 개발이 진행중이다. 국내의 위성탑재용 RF 부품분야는 1990년부터 위성 중계기 시스템의 기본적인 설계, 조립, 종합화, 시험기술을 바탕으로 통신위성 탑재체용 초고주파 부품을 개발하여 왔으며, 2000년대에는 Ku 대역(12/14GHz) 및 Ka 대역(20/30GHz) 기술인증모델(EQM) RF 부품을 성공적으로 개발하였다. 이를 바탕으로 통신해양기상위성 통신탑재체용 Ka 대역 RF 부품이 현재 우주인증 모델(QM)의 개발이 완료되었으며 비행 모델(FM) 개발이 진행중이다.

• 한국전기전자재료학회논문지
• /
• 제15권9호
• /
• pp.794-797
• /
• 2002

Piezoelectric properties of PZT-PSN ceramics were investigated as a function of WO$_3$ addition from 0 wt% to 6.0 wt%. The dielectric and piezoelectric characteristics of PZT-PSN ceramics have been investigated at different calcination (80$0^{\circ}C$~90$0^{\circ}C$) and sintering (110$0^{\circ}C$~130$0^{\circ}C$) temperatures. The grain size was increased with the addition of WO$_3$and the sintering temperatures. Anisotropic properties of electromechanical coupling coefficient and piezoelectric coefficient are proven to be dependent on processing temperatures and amount of addition. At the specimen with 0.6 wt% WO$_3$ addition, using calcination temperature of 80$0^{\circ}C$ and sintering temperature of 110$0^{\circ}C$ , mechanical quality factor(Q$_{m}$) and electromechanical coupling coefficient(k$_{p}$) showed the excellent results of 1560 and 0.48, respectively Experimental results indicated that the PZT-PSN system ceramics with WO$_3$impurity could be effectively used for the microtransformer and actuator applications, etc.etc.

• 한국전기전자재료학회논문지
• /
• 제20권12호
• /
• pp.1039-1043
• /
• 2007

In this paper, in order to develop low temperature sintering ceramics for multilayer piezoelectric actuator application, PMN-PZN-PZT ceramics were fabricated using $LiCO_3,\;Bi_2O_3$ and CuO as sintering aids. And also, their piezoelectric and dielectric properties were investigated according to the milling time. All the specimens sintered at $930\;^{\circ}C$ showed tetragonal phases without secondary phases. With increasing milling time, piezoelectric and dielectric characteristic of specimens increased up to 60 hours milling time and then decreased due to the agglomeration of fine particle. Accordingly, it seems that 60 hour is optimum milling condition. At the sintering temperature of $930\;^{\circ}C$ and milling time of 60 hour, density, dielectric constant(${\varepsilon}_r$), electromechanical coupling factor (kp), mechanical quality factor (Qm), piezoelectric d constant showed the optimum value of $7.95\;g/m^3$, 1382, 0.546, 1749, 330 pC/N, respectively for multilayer piezoelectric actuator application.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1320-1332
• /
• 1996

In the present study, we consider modified 5-node equivalent solid element which has smallest degree of freedom among 2-dimensional solid elements accounting bending deformation as well as extensional and shear deformations, We shall investigate static and dynamic characteristics of this element, which is very effective in thin beam, thick beam, large displacement problems, beam of variable thickness, and asymmetrically stepped beam, etc., as well as relatively simple problems of beam. The degree of freedom of this element is 10, which is smaller than 18 of 9-node element, 16 of 8-node elemtns, 12 of modified 6-node element and Q6 element. Therefore, this element is expected to broaden the effective range of application of the solid elements in the bending problems further.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.598-602
• /
• 2017

한국항공우주연구원에서는 1.5톤급의 실용위성을 태양동기궤도에 투입할 수 있는 3단형 발사체인 한국형발사체 KSLV-II를 개발하고 있다. 한국형발사체의 개발과정으로 2018년에는 2단과 3단으로 구성된 시험발사체(TLV)를 발사할 계획이며 여기에 사용되는 추진기관은 한국형발사체의 2단 엔진인 75톤급 엔진의 지상형 모델과 추진제 탱크, 공급 시스템이 적용되게 될 것이다. 현재 엔진시스템을 포함한 시험발사체 추진기관의 경우, 엔지니어링모델(EM)의 조립과 인증모델(QM)의 제작, 납품이 이루어지고 있다. 본 논문에서는 한국형발사체 추진기관의 개발중 수행되고 있는 제품보증 활동에 대하여 설명하고자 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.60-63
• /
• 1997

Dieletric ailed piezoelectric properties of Pb[$Zr_{0.45}$/ $Ti_{0.5-x}$/L $u_{x}$ (M $n_{1}$3//S $b_{2}$3)$_{0.05}$] $O_3$(0$\leq$x $\leq$0.03) were investigated. The partial substitution of $Ti^{4+}$ by a L $u^{3+}$ permitted improvement of the piezoelectric constant( $d_{33}$ ), electromechanical coupling factor ( $k_{p}$ ) and dielectric constant($\varepsilon$$_{33}$ /Sup T/). The dielectric loss(tan $\delta$ ) increased and mechanical quality factor(Qm) decreased with an increase of x were observed. A new piezoelectric material for actuator application was developed at x=0.02 with $d_{33}$ =370$\times$10$^{-2}$ /C/N, $k_{p}$ =58.5%, $\varepsilon$$_{33}$ $^{T}$ =1321, $Q_{m}$ =714 and tan $\delta$ =0.98%.%..%.%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1824-1827
• /
• 2003

During normal machine operation, partial discharge(PD) measurements were performed with turbine generator analyzer(TGA) in two high voltage motors. Two 6.6kV motors were installed with 80pF capacitive couplers at the terminal box. The PD patterns were displayed two dimensional and three dimensional. TGA summarizes each plot with two quantifies such as the normalized quantity number(NQN) and the peak PD magnitude(Qm). Off-line PD measurements were conducted on one 4.16kV motor. The motor was energized to 2.4kV, 3.0kV, 3.5kV and 4.16kV, respectively. The PD levels in pC were measured with a conventional digital PD detector. The comparison of positive to negative PD indicates whether the defect elements of PD are within the insulation or on the insulation surface. Discharge at conductor surface was discovered in No. 1 motor. Internal discharges were generated in phase A, B and C of No. 2 motor, Slot discharges occurred in three phases of No. 3 motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1612-1614
• /
• 2003

80pF capacitive couplers were connected to six 6.6kV motor model coil terminals. The voltage applied to the coils were 3.81kv, 4.76 kV and 6.6kV, respectively. These stator coils have various types of artificial insulation defects such as large voids, semi-conductive coating damage and strand insulation fault. Digital PD detector(PDD) and turbine generator analyzer(TGA) were used to measure PD activity. TGA summarizes each plot with two quantities such as the normalized quantity number(NQN) and the peak PD magnitude(Qm). The PD levels in PD were measured with a conventional digital PD detector. Most of the defect mechanism of large motor stator winding can be associated with PD patterns such as internal and slot discharges. PD patterns coincide with PDD and TGA. These instruments have an input bandwidth of 40-400kHz and 0.1-350MHz. Surge testing detects faults in inter-turn winding of high voltage motor model coils.