• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.2
• /
• pp.94-100
• /
• 2004

In order to improve the wear resistance of Ti-6Al-4V alloy, plasma carburization treatment was newly carried out without consumption of its good specific strength and fatigue life over the temperature. Effect of the plasma carburization was analyzed and compared with the non-treated alloy by microstructural observation, structure characterization and mechanical test. The plasma treated alloy formed a carburized layer of about $150{\mu}m$ in depth from the surface, where a fine and hard particles of TiC and $V_4C_3$ were homogeneously dispersed through the layer. The steady-static creep behaviors of Ti-6Al-4V alloy, using the constant stress creep tester, were investigated over the temperature range of $510{\sim}550^{\circ}C$(0.42~0.44Tm) and the stress range of 200~275 MPa. Stress exponent(n) was decreased from 9.32 of non-treatment specimen to 8.95 of carburized, however, the activation energy(Q) increased from 238 to 250 kJ/mol with the same condition as indicated above. From the above results, it can be concluded that the static creep deformation for Ti-6Al-4V alloy was controlled by the dislocation climb over the ranges of the experimental conditions.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.1
• /
• pp.143-151
• /
• 1997

Chemical resistance of the cement mortar containing the Thermally Activated Diaomite(TAD) and H.M.(Heavy Metals) has been studied. The H.M.. extracted from EAF(Electrica1 Arc Furnace) Dust. were saturated with diatomite. The diatomite was then thermally activated at $750{\circ}C$ for 30minutes and powdeled. The powder was mixed with a portland cement on a weight basis from 0%. 2.5%. 5.0%. 10%. 20%. The optimum mixture. after those mixtures were subjected to compressive strength(7 and 28days) and leaching bchaviour of H.M.. was tested for its experiment on Wet/Dry cycles and chemical resistance(e.q. imrncrsion in 5%(Conc.) of H2S04, CaC12 and hlgSO4. It was shown that the cement, mortar containing 10% of' P.D. gave a rise to the remarkable increase in compressive strength. The compressive strength was generally decrease beyond the addition of 10% of P.D. The maximum $496kgf/cm^2$ of 28days compressive strength was acheiveti when 10% of P.D. was added to the cement mortar.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.3
• /
• pp.275-284
• /
• 1999

Unbalanced source voltage in the 3-phase power system is decomposed into positive, negative and zero sequence c components. Also, assuming there is no neutral path in the system, the zero sequence component is not shown on the l load side. Therefore, in the unbalanced power system without neutral path. it is possible to provide balanced voltage to t the load side by compensating negative sequence component and also to regulate the voltage amplitude by controlling t the positive sequence component. In addition, the symmetrical components due to voltage unbalance can be effectively d detected on the synchronous reference frame by using dlongleftarrowq transformation. In this paper, an algorithm not only c compensating unbalanced source voltage by canceling the negative sequence component on the synchronous reference f frame but also maintaining load voltages constantly is proposed. Also a novel method for phase angle detection s synchronized by positive sequence component under unbalanced source voltage is suggested and this detected phase a angle is used for d-q transformation. The performances and characteristics of the proposed compensating system are a analyzed by simulation and verified through experimental results.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.2
• /
• pp.122-126
• /
• 1994

Corrosion of brass coated steel cords in the acetonitrile solution of sulfenamide derivatives, N-Cyclohexylbenzothiazole-2-sulfenamide (CBTS), N,N'-Dicyclohexylbenzothiazole-2-sulfenamide (DCBS), N-tert-Butylbenzothiazole-2-sulfenamide (TBBS), N-tert-Amylbenzothiazole-2-sulfenamide (TABS), and N-Oxydiethylbenzothiazole-2-sulfenamide (OBTS) was investigated by potentiostatic anodic and cathodic polarization (Tafel plot), DC polarization resistance, and AC impedance measurements. The corrosion current densities and rates are 1.236 ${\mu}A /cm^2$ and 0.655 MPY for CBTS; 1.881 ${\mu}A/cm^2$ and 0.988 MPY for DCBS; 2.367 ${\mu}A/cm^2$ and 1.257 MPY for TBBS; 3.398 ${\mu}A /cm^2$ and 1.809 MPY for TABS, respectively. OBTS among derivatives under study shows the lowest corrosion density (0.546 ${\mu}A /cm^2$) and the slowest corrosion rate (0.288 MPY). Also, the charge transfer resistances and the double layer capacitances are 275.21 $k{\Omega}{\cdot}cm^2$ and 7.0 ${\mu}F{cdot}cm^{-2}$ for CBTS; 14.24 ${\mu}F{\cdot}cm^2$ and 26 ${\mu}F{\cdot}cm^{-2}$ for DCBS; 54.15 $k{\Omega}{\cdot}cm^2$ and 26 ${\mu}F{\cdot}cm^{-2}$ for TBBS; 0.96$k{\Omega}{\cdot}cm^2$ and 83 ${\mu}F{\cdot}cm^{-2}$ for TABS, respectively. The weaker the electron donating inductive effect of derivatives is and the smaller the effect of steric hindrance is, the more the corrosion of brass coated steel cords in the acetonitrile solution of sulfenamide derivatives is prevented. The above results agree with that observed in the field of tire industry.

• Journal of Powder Materials
• /
• v.25 no.6
• /
• pp.487-493
• /
• 2018

The impact of different mixing methods and sintering temperatures on the microstructure and piezoelectric properties of PZNN-PZT ceramics is investigated. To improve the sinterability and piezoelectric properties of these ceramics, the composition of $0.13Pb((Zn_{0.8}Ni_{0.2})_{1/3}Nb_{2/3})O_3-0.87Pb(Zr_{0.5}Ti_{0.5})O_3$ (PZNN-PZT) containing a Pb-based relaxor component is selected. Two methods are used to create the powder for the PZNN-PZT ceramics. The first involves blending all source powders at once, followed by calcination. The second involves the preferential creation of columbite as a precursor, by reacting NiO with $Nb_2O_5$ powder. Subsequently, PZNN-PZT powder can be prepared by mixing the columbite powder, PbO, and other components, followed by an additional calcination step. All the PZNN-PZT powder samples in this study show a nearly-pure perovskite phase. High-density PZNN-PZT ceramics can be fabricated using powders prepared by a two-step calcination process, with the addition of 0.3 wt% MnO2 at even relatively low sintering temperatures from $800^{\circ}C$ to $1000^{\circ}C$. The grain size of the ceramics at sintering temperatures above $900^{\circ}C$ is increased to approximately $3{\mu}m$. The optimized PZNN-PZT piezoelectric ceramics show a piezoelectric constant ($d_{33}$) of 360 pC/N, an electromechanical coupling factor ($k_p$) of 0.61, and a quality factor ($Q_m$) of 275.

• Korean Journal of Microbiology
• /
• v.40 no.4
• /
• pp.275-281
• /
• 2004

Our previous research has demonstrated that the bacterium, Pseudomonas sp. NFQ-l capable of utilizing quin­oline (2,3-benzopyridine) as the sole source of carbon, nitrogen, and energy was isolated and characterized [Yoon et ai. (2003) Kor. J. Biotechnol. Bioeng. 18(3):174-179]. In this study, we have found that Pseudomonas sp. NFQ-l could degrade quinoline as well as benzoate, and extended this work to characterize the catechol 1,2­dioxygenase (C1,2O) purified from the bacterium cultured in benzoate media. Initially, C1,2O has been purified by ammonium sulfate precipitation, gel permeation chromatography, and Source 15Q. After Source 15Q, puri­fication fold was increased to approximately 14.21 unit/mg. Molecular weight of C1,2O was about 33 kDa. Physicochemical characteristics (e.g., substrate specificity, Km, Vmax, pH, temperature and effect of inhibitors) of purified C1,2O were examined. C1,2O demonstrated the activity for catechol, 4-methylcatechol and 3-meth­ylcatechol as a substrate, respectively. The Km and Vmax value of C1,2O for catechol was 38.54 ${\mu}M$ and $25.10\;{\mu}mol{\cdot}min^{-1}{\cdot}mg^{-1}.$ The optimal temperature of C1,2O was $30^{\circ}C$ and the optimal pH was approximately 8.5. Metal ions such as $Ag^+,\;Hg^+,\;Ca^{2+},\;and\;Cu^{2+}$ show the inhibitory effect on the activity of C1,2O. N-terminal amino sequence of C1,2O was analyzed as ^1TVKISQSASIQKFFEEA^{17}.$ In this work, we found that the amino acid sequence of NFQ-l showed the sequence homology of 82, 71, 59 and $53\%$ compared with C1,2O from Pseudomonas aeruginosa PA0l, Pseudomonas arvilla C-1., P. putida KT2440 and Pseudomonas sp. CA10, respectively.

• Journal of Life Science
• /
• v.26 no.3
• /
• pp.275-281
• /
• 2016

Glycan modification is important in pharmaceutical industry. Especially, sialic acid affects the bioactivity and stability of medicine. Milk of pig has been used as bioreactor to produce various pharmaceutical proteins. Therefore, it is necessary to modify the glycan chain in pig mammary grand. β-1,4-N-Acetylglucosaminyltransferase A (pMGAT4A) is one of the essential enzymes for increase of sialic acid content, but pig MGAT4A is unclear. In this study, the pMGAT4A was identified and characterized. The pMGAT4A has 1638 nucleotides encoding 535 amino acids and type II membrane topology, which is one of the common features in many glycosyltransferases. The gene was strongly expressed in liver and mammary gland, whereas was weakly expressed in small intestine, stomach and bladder. For functional test, HA-tagged MGAT4A was over-expressed in porcine kidney (PK-15) cell line. Forced expression of pMGAT4A gene was identified by qPCR, and we identified that pMGAT4A is located in Golgi complex by co- staining with HA antibody and BODIPY TR ceramide. In addition, we identified the increase of mannose-β-1,4-N-acetylglucosamine structure by ELISA and immunofluorescence using Datura stramonium agglutinin (DSA), which recognizes mannose-β-1,4-Nacetylglucosamine. Through the specific activity analysis, we showed that pMGAT4A modified bi-antennary to tri-antennary. This event affects sialic acid content. Therefore, we thought that over-expression of pMGAT4A will be necessary in pig mammary grand for improved medicine.

• Journal of Nutrition and Health
• /
• v.51 no.4
• /
• pp.275-286
• /
• 2018

Purpose: Our previous study demonstrated that persimmon (Diospyros kaki Thumb.) at different stages of ripening provided different protective effects against high-fat/cholesterol diet (HFD)-induced dyslipidemia in rats. In this study, we compared the metabolites profile and gene expressions related to triglyceride (TG)/cholesterol metabolism in vitro and in vivo after treating with persimmon water extracts (PWE) or tannin-enriched persimmon concentrate (TEP). Methods: Primary and secondary metabolites in test materials were determined by GC-TOF/MS, UHPLC-LTQ-ESI-IT-MS/MS, and UPLC-Q-TOF-MS. The expression of genes related to TG and cholesterol metabolism were determined by RT-PCR both in HepG2 cells stimulated by oleic acid/palmitic acid and in liver tissues obtained from Wistar rats fed with HFD and PWE at 0, 150, 300, and 600 mg/d (experiment I) or TEP at 0, 7, 14, and 28 mg/d (experiment II) by oral gavage for 9 weeks. Results: PLS-DA analysis and heatmap analysis demonstrated significantly differential profiling of metabolites of PWE and TEP according to processing of persimmon powder. In vitro, TEP showed similar hypolipidemic effects as PWE, but significantly enhanced hypocholesterolemic effects compared to PWE in sterol regulatory element-binding protein 2 (SREBP2), HMG-CoA reductase (HMGCR), proprotein convertase subtilisin/kexin type 9 (PCSK9), cholesterol $7{\alpha}-hydroxylase$ (CYP7A1), and low density lipoprotein receptor (LDLR) gene expression. Consistently, TEP and PWE showed similar hypolipidemic capacity in vivo, but significantly enhanced hypocholesterolemic capacity in terms of SREBP2, HMGCR, and bile salt export pump (BSEP) gene expression. Conclusion: These results suggest that column extraction after hot water extraction may be a good strategy to enhance tannins and long-chain fatty acid amides, which might cause stimulation of hypocholesterolemic actions through downregulation of cholesterol biosynthesis gene expression and upregulation of LDL receptor gene expression.

• Biomolecules & Therapeutics
• /
• v.23 no.3
• /
• pp.275-282
• /
• 2015

In the present study, we synthesized a series of novel 7-methoxy-N-(substituted phenyl)benzofuran-2-carboxamide derivatives in moderate to good yields and evaluated their neuroprotective and antioxidant activities using primary cultured rat cortical neuronal cells and in vitro cell-free bioassays. Based on our primary screening data with eighteen synthesized derivatives, nine compounds (1a, 1c, 1f, 1i, 1j, 1l, 1p, 1q and 1r) exhibiting considerable protection against the NMDA-induced excitotoxic neuronal cell damage at the concentration of $100{\mu}M$ were selected for further evaluation. Among the selected derivatives, compound 1f (with $-CH_3$ substitution at R2 position) exhibited the most potent and efficacious neuroprotective action against the NMDA-induced excitotoxicity. Its neuroprotective effect was almost comparable to that of memantine, a well-known NMDA antagonist, at $30{\mu}M$ concentration. In addition to 1f, compound 1j (with -OH substitution at R3 position) also showed marked anti-excitotoxic effects at both 100 and $300{\mu}M$ concentrations. These findings suggest that $-CH_3$ substitution at R2 position and, to a lesser degree, -OH substitution at R3 position may be important for exhibiting neuroprotective action against excitotoxic damage. Compound 1j was also found to scavenge 1,1-diphenyl-2-picrylhydrazyl radicals and inhibit in vitro lipid peroxidation in rat brain homogenate in moderate and appreciable degrees. Taken together, our structure-activity relationship studies suggest that the compound with $-CH_3$ substitution at R2 and -OH substitution at R3 positions of the benzofuran moiety might serve as the lead exhibiting potent anti-excitotoxic, ROS scavenging, and antioxidant activities. Further synthesis and evaluation will be necessary to confirm this possibility.

• Journal of the Korean Child Neurology Society
• /
• v.26 no.4
• /
• pp.272-275
• /
• 2018

KBG syndrome is a rare neurodevelopmental disorder characterized by intellectual disability, skeletal anomalies, short stature, craniofacial dysmorphism, and macrodontia. ANKRD11 gene mutation and 16q24.3 microdeletion have been reported to cause KBG syndrome. Here, we report two patients with ANKRD11 mutations who initially presented with neurologic symptoms such as developmental delay and seizures. Patient 1 was a 23-month-old boy who presented with a global developmental delay. Language delay was the most dominant feature. He had hypertelorism, hearing impairment, and behavior problems characterized as hyperactivity. A c.1903_1907delAAACA (p.Lys635GInfsTer26) mutation in ANKRD11 was identified with diagnostic exome sequencing. Patient 2 was a 14-month-old boy with developmental delay and seizure. He also had atrial septum defect, and ventricular septal defect. Generalized tonic seizures began at the age of 8 months. Electroencephalography showed generalized sharp and slow wave pattern. Seizures did not respond to antiepileptic drugs. A loss of function mutation c.5350_5351delTC (p.ser1784HisfsTer12) in ANKRD11 was identified with diagnostic exome sequencing. In both cases, characteristic features of KBG syndrome such as short stature or macrodontia, were absent, and they visited the hospital due to neurological symptoms. These findings suggest that more patients with mild phenotypes of KBG syndrome are being recognized with advances in diagnostic exome sequencing genetic technologies.