• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.180-185
• /
• 2021

A femtosecond-laser inscribed Yb:YAG surface channel waveguide (WG) laser with single-walled carbon nanotubes deposited on the top surface of the WG was passively Q-switched by evanescent field interaction. Q-switched operation of the 14-mm-long compact Yb:YAG WG laser was achieved near 1031 nm with two different pumping schemes (single- and double-pass pumping) with an output coupling transmission of 91%. The Q-switched pulse characteristics depending on the absorbed pump power were investigated for both pumping geometries and analyzed in detail based on theoretical modeling. The best performances (energy/pulse duration) for each configuration were 204.4 nJ/75 ns at a repetition rate of 1.87 MHz, and 201.1 nJ/81 ns at 1.75 MHz for single- and double-pass pumping, respectively.

• Journal of the Optical Society of Korea
• /
• 제17권1호
• /
• pp.5-9
• /
• 2013

We report on high-power continuous-wave operations of an Er:YAG ceramic laser in-band pumped by a cladding-pumped Er,Yb fiber laser at 1532 nm. With an output coupler of 10% transmission, the ceramic laser yielded 16.7 W of continuous-wave output at 1645 nm for 28.8 W of incident pump power, corresponding to a slope efficiency of 61.0% with respect to the incident pump power. The lasing wavelength switched to 1617 nm when output couplers of > 20% transmission were used. Up to 16.2 W of 1617 nm output was generated for 33.0 W of incident pump power, corresponding to a slope efficiency of 51.8%. Graphene Q-switched operation of Er:YAG cermic laser at 1645 nm was also demonstrated with stable pulses of 30-74 kHz repetition rates and 1.5-6.4 ${\mu}s$ pulse widths.

• 한국광학회지
• /
• 제19권4호
• /
• pp.320-326
• /
• 2008

광섬유 연결 반도체레이저 여기 세라믹 Nd:YAG 레이저의 전기광학 Q-스위칭 출력 특성에 대해 연구하였다. 세라믹 Nd:YAG 레이저의 Q-스위칭은 여기원의 펄스폭 $1,000\;{\mu}s$, 출력 거울의 반사율 77% 및 지연시간 $985\;{\mu}s$에서 최적화되었다. 여기 에너지 17.9 mJ에서 0.35 mJ의 Q-스위칭된 출력 에너지와 약 4 ns의 펄스폭이 측정되어 1.9%의 출력 효율과 87.5 kW의 첨두 출력을 나타내었다.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.541-549
• /
• 2014

In this paper, an extended switched-inductor quasi-Z-source inverter (ESL-qZSI) with high boost voltage inversion ability is presented, which combines the SL-qZSI with the traditional boost converter, as well as improves the switched-inductor cell. Compared with the classic qZSI topologies, the proposed topology reduces the voltage stresses of capacitors, power devices and diodes for the same input and output voltage. Furthermore, the conversion efficiency is improved. The operation principle of the proposed topology is analyzed in details, which is followed by the comparison between the three topologies. In addition, the performance of the proposed topology is verified by simulations and experiments.

• 한국군사과학기술학회지
• /
• 제7권4호
• /
• pp.91-99
• /
• 2004

Laser materials for eyesafe wavelength generation and Q-switching crystals for short pulse operation were studied and compared with each other. Er,Yb:phosphate glass as a laser material and $Co^{2+}:MgA1_2O_4$ as a saturable absorber were found to be an effective pair for a compact, light-weight passively Q-switched eyesafe laser operation. Simplified rate equation was used to estimate pulse parameters of the diode-pumped passively Q-switched laser.

• 한국광학회지
• /
• 제28권6호
• /
• pp.351-355
• /
• 2017

본 논문에서는 포화흡수체의 투과변조깊이 조절을 통해 다양한 펄스 상태를 한 공진기 안에서 구현하는 방법에 관한 전산 모사를 진행하였다. 포화흡수체의 투과변조깊이의 크기 변화만으로 큐스위치드 레이저, 큐스위치드 모드 잠금 레이저, 모드 잠금 레이저 등 원하는 펄스 레이저 상태로 전환이 가능하다는 실험적 연구가 있어 왔으며, 이러한 연구가 이론적으로 부합하는 내용임을 확인하기 위해 Haus master 식을 사용하여 전산 모사를 진행하였다. 큐스위칭된 광 파워를 모사하기위해 이득 값은 시간 의존성을 가지도록 반응속도식을 적용하였다. 그 결과 투과변조깊이가 증가함에 따라 모드 잠금 레이저에서부터, 큐스위치드 레이저, 큐스위치드 레이저로 동작함을 확인하였고, 이는 이론적으로 예측된 경향성과 일치하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권5호
• /
• pp.675-681
• /
• 2016

A 41dB gain control range $6^{th}$-order band-pass receiver front-end (RFE) using CMOS switched frequency translated impedance (FTI) is presented in a 40 nm CMOS technology. The RFE consists of a frequency tunable RF band-pass filter (BPF), IQ gm cells, and IQ TIAs. The RF BPF has wide gain control range preserving constant filter Q and pass band flatness due to proposed pre-distortion scheme. Also, the RF filter using CMOS switches in FTI blocks shows low clock leakage to signal nodes, and results in low common mode noise and stable operation. The baseband IQ signals are generated by combining baseband Gm cells which receives 8-phase signal outputs down-converted at last stage of FTIs in the RF BPF. The measured results of the RFE show 36.4 dB gain and 6.3 dB NF at maximum gain mode. The pass-band IIP3 and out-band IIP3@20 MHz offset are -10 dBm and +12.6 dBm at maximum gain mode, and +14 dBm and +20.5 dBm at minimum gain mode, respectively. With a 1.2 V power supply, the current consumption of the overall RFE is 40 mA at 500 MHz carrier frequency.

• 한국광학회지
• /
• 제8권5호
• /
• pp.357-361
• /
• 1997

밀도반전된 Nd:YAG에서 자체 교차하는 빔경로를 구성하여 위상공액파 레이저를 발진 시켰다. 서로 교차하는 두빔에 의한 spatial hole burning에 의해 3차 비선형 분극이 유도되어 레이저 공진기 내부의 위상 왜곡(phase distortion)이 자체 보정됨을 관측하였고, 레이저 이득체내에서 형성되는 동적 부피 격자의 생성과 소멸에 의한 효과로 반치폭 20 나노초의 자연 Q-switched 레이저 펄스가 발진되었다. 평균 펄스당 출력 에너지는 10 Hz 동작에서 200 mJ로 측정되었으며, 최대 전체 출력 효율은 0.8%로 나타났다.

• Journal of the Optical Society of Korea
• /
• 제5권4호
• /
• pp.136-139
• /
• 2001

We investigated a high-output ower, periodically poled lithium niobate(PPLN) optical parametric oscillator(OPO) pumped by a Q-switched Nd:YAG laser. Given the low optical damage threshold and the limited aperture (0.5mm thick) of PPLN, we tried to maximize the signal output power in a linear cavity consisting of two flat mirrors with a loosely focused pump beam. It is found that this simple cavity structure allowed a robust OPO operation, which was not sensitive to alignment compared with the conventional ones using concave mirrors. A maximum energy of 100$\mu$J/pulse was achieved for the signal at 1.36${\mu}{\textrm}{m}$, while the oscillation threshold was 0.3 mJ/pulse for the pump at 1064 nm.

• 한국레이저가공학회지
• /
• 제7권1호
• /
• pp.29-36
• /
• 2004

The dynamics of laser-induced plasma/shock wave and the interaction with a surface in the laser shock cleaning process are analyzed by optical diagnostics. Shock wave is generated by a Q-switched Nd:YAG laser in air or with N$_2$, Ar, and He injection into the focal spot. The shock speed is measured by monitoring the photoacoustic probe-beam deflection signal under different conditions. In addition, nanosecond time-resolved images of shock wave propagation and interaction with the substrate are obtained by the laser-flash shadowgraphy. The results reveal the effect of various operation parameters of the laser shock cleaning process on shock wave intensity, energy-conversion efficiency, and flow characteristics. Discussions are made on the cleaning mechanisms based on the experimental observations.