• 대한전자공학회논문지SP
• /
• 제41권4호
• /
• pp.131-139
• /
• 2004

본 논문에서는 opposite 필터를 적용한 가변 Q 디지털 그래픽 이퀄라이저를 제안한다. 그리고 제안한 이퀄라이저를 설계하는 방법을 제시한다. 본 논문에서 제안하는 가변 Q 이퀄라이저에서는 이퀄라이저의 성능을 개선하기 위해서 이득에 따라 이퀄라이저 필터의 Q-factor를 조정한다. 또한, opposite 필터의 Q-factor를 이득이 높아짐에 따라 완만하게 증가하도록 설정함으로써 opposite 필터가 대역간 간섭을 효과적으로 제거할 수 있게 한다. 실험을 통해 제안한 opposite 필터를 적용한 가변 Q 이퀄라이저는 사용자가 설정한 이득을 매우 충실하게 표현함을 보이겠다.

• 마이크로전자및패키징학회지
• /
• 제18권3호
• /
• pp.39-43
• /
• 2011

마이크로파 유전체의 Q 값 측정에 널리 사용되고 있는 유전체 공진기 방법에서 캐비티의 재질변화가 유전체의 Q 값 측정에 미치는 오차요인에 대해 HFSS 시뮬레이션과 실측평가를 병행하여 조사하였다. HFSS의 전자계 벡터 형상으로부터 $TE_{01\delta}$ 모드의 공진주파수를 결정하고 $S_{21}$ 파라메터의 3dB 대역폭으로부터 Q 값을 계산하였다. 캐비티 금속이 Cu, SUS, Au 등으로 변화할 경우 유전체 공진기의 Q 값 측정에 큰 오차는 발생하지 않았으나, 금속이 산화하여 전도도가 수 천 정도로 떨어질 경우 Q 값이 매우 낮게 측정되는 오차가 발생함을 확인하였다. 이러한 시뮬레이션 결과는 실제로 다양한 재질의 금속 캐비티를 가지고 유전체 공진기의 Q 값을 측정해 본 결과 서로 일치되는 관련성을 나타내었다.

• 디지털산업정보학회논문지
• /
• 제11권1호
• /
• pp.171-182
• /
• 2015

The general wavelet transform has profitable property in non-stationary signal analysis specially. The tunable Q-factor wavelet transform is a fully-discrete wavelet transform for which the Q-factor Q and the asymptotic redundancy r, of the transform are easily and independently specified. In particular, the specified parameters Q and r can be real-valued. Therefore, by tuning Q, the oscillatory behavior of the wavelet can be chosen to match the oscillatory behavior of the signal of interest, so as to enhance the sparsity of a sparse signal representation. The TQWT is well suited to fast algorithms for sparsity-based inverse problems because it is a Parseval frame, easily invertible, and can be efficiently implemented. The transform is based on a real valued scaling factor and is implemented using a perfect reconstruction over-sampled filter bank with real-valued sampling factors. The transform is parameterized by its Q-factor and its over-sampling rate, with modest over-sampling rates being sufficient for the analysis/synthesis functions to be well localized. This paper describes filter design of 2D discrete-time wavelet transform for which the Q-factor is easily specified. With the advantage of this transform, perfect reconstruction filter design and implementation for performance improvement are focused in this paper. Hence, the 2D transform can be tuned according to the oscillatory behavior of the image signal to which it is applied. Therefore, application for performance improvement in multimedia communication field was evaluated.

• 디지털산업정보학회논문지
• /
• 제10권3호
• /
• pp.237-247
• /
• 2014

This paper describes a 2D discrete-time wavelet transform for which the Q-factor is easily specified. Hence, the transform can be tuned according to the oscillatory behavior of the image signal to which it is applied. The tunable Q-factor wavelet transform (TQWT) is a fully-discrete wavelet transform for which the Q-factor, Q, of the underlying wavelet and the asymptotic redundancy (over-sampling rate), r, of the transform are easily and independently specified. In particular, the specified parameters Q and r can be real-valued. Therefore, by tuning Q, the oscillatory behavior of the wavelet can be chosen to match the oscillatory behavior of the signal of interest, so as to enhance the sparsity of a sparse signal representation. The TQWT is well suited to fast algorithms for sparsity-based inverse problems because it is a Parseval frame, easily invertible, and can be efficiently implemented. The TQWT can also be used as an easily-invertible discrete approximation of the continuous wavelet transform. The transform is based on a real valued scaling factor (dilation-factor) and is implemented using a perfect reconstruction over-sampled filter bank with real-valued sampling factors. The transform is parameterized by its Q-factor and its oversampling rate (redundancy), with modest oversampling rates (e. g. 3-4 times overcomplete) being sufficient for the analysis/synthesis functions to be well localized. Therefore, This method services good performance in image processing fields.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2002년도 정기총회 및 학술대회
• /
• pp.179-182
• /
• 2002

본 논문에서는 디지털 이퀄라이저에 대하여 검토하고, 대역 및 이득에 따라 Q-factor를 가변시키는 디지털 이퀄라이저 필터를 제안한다. 제안한 기법은 고정된 Q-factor를 사용하거나, 대역에 따라 Q-factor를 결정하는 기존의 방법들에 비해 가청 주파수 영역에서의 대칭성과 이득 리플 등의 측면에서 우수하고, 기존의 방법과 동일한 수준의 하드웨어 복잡도를 보인다. 또한, 중심 주파수 선정에 따른 성능 변화에 대해서도 고찰한다.

• Journal of Ecology and Environment
• /
• 제35권3호
• /
• pp.227-234
• /
• 2012

Quercus aliena and Q. serrata are both occur as natural vegetation alongside natural freshwater bodies of the southern Korea Peninsula. Q. serrata dominates over Q. aliena as secondary forest vegetation in the present day. In order to explain these natural distributional traits of the oak species, we conducted some experiments with oak seedlings which treated with major important environmental resources, including light, moisture and nutrients, under controlled conditions. We then measured the ecological niche breadths and overlap from 15 eco-morphological characteristics. The ecological niche breadth of Q. aliena and Q. serrata were higher in terms of the nutrient factor applied, but was lower terms of light. The niche breadth of Q. serrata was wider than that of Q. aliena in light and moisture exposure. On the other hand, the niche breadth of Q. aliena was similar with that of Q. serrata in terms of the nutrient factor applied. These results imply that Q. serrata has a broader ecological distribution in over a wider variety of light and moisture environments than that of Q. alien. Ecological niche overlap between two oak species was the widest in terms of the light treatment factor applied, and narrowest in terms of moisture. This response pattern was also verified by cluster and principle component analysis. These results suggest competitive interactions between Q. serrata and Q. aliena seedlings may be higher for light resources than moisture or nutrient resources, and that Q. serrata is more shade tolerant than Q. aliena.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.3-7
• /
• 2004

An electric power efficiency of electrodeless fluorescent lamp has big relativie property of gas in lamp, gas pressure, lamp formation, ingredients of magnetic substance and shape and action frequency etc. We used magnetic substance that open self-examination material of electrodeless fluorescent lamp antenna. Ferrite that is used in this experiment was Mn-Zn type. We have examined resistance kind, impedance, Q-factor's frequency characteristic by ferrite. Impedance, resistance and capacitance did not show difference in start frequency 2.65 [MHz] but there was difference quantity. We could know Q-factor's difference according to material, and Q-factor's is important part of antenna design.

• 한국항행학회논문지
• /
• 제13권1호
• /
• pp.27-33
• /
• 2009

채널 전송률이 40 Gbps인 WDM 채널들의 성능을 개선시키는 새로운 광전송 링크 기술을 제안하였다. 제안된 광전송 링크는 전체 전송로 중간에 광 위상 공액기 (optical phase conjugator)를 두고 전송로에서 축적된 분산은 분산 제어 (DM; dispersion management)을 통해 보상하는 구조이다. DM이 OPC와 결합하면 DM을 통해 전송 링크 전체에서 축적된 분산량을 줄여줌과 동시에 OPC에 의한 비선형성 보상의 정도를 더욱 좋게 하여 결과적으로 모든 채널들의 Q-factor가 크게 개선되는 것을 확인하였다. 그리고 모든 WDM 채널들의 Q-factor 개선은 광전송 링크의 전체 잉여 분산 (NRD; net residual dispersion)에 크게 의존한다는 것을 알 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.528-532
• /
• 2013

본 연구에서는, 해석적 모델로 불규칙하게 분포된 질량을 가진 열탄성 댐핑을 포함하는 마이크로빔 구조물을 연구하였다. 마이크로 스케일의 기계적 공명체(mechanical resonator)에 대한 열탄성 댐핑의 중요성은 높은 Q-factor를 설계하는데 고려된다. 본 연구에서의 빔 모델은 Euler-Bernoulli 빔 이론을 기조로 한다. 빔의 고유 진동수를 결정하기 위하여, 에너지 기법이 적용되었다. 또한, 열탄성 댐핑 효과는 열전도 방정식을 사용할으로써 고려되었고, Q-factor가 결정될 수 있었다. 운동방정식의 유도에는 체계적인 무차원화를 수행하였다. 임의의 집중된 질량을 포함하는 열탄성 댐핑을 가진 마이크로빔에 대해 모델의 결과값을 입증하였고 mode shape과 Q-factor를 제시하였다.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.64-70
• /
• 2010

This paper presents how to decide on tuning factor(${\delta}$) and quality factor(Q) values in design of single-tuned passive harmonic filters. Tuning factor(${\delta}$) and quality factor(Q) values have to consider before decision on circuit parameters of passive filters. A Study on these two value has not been scarcely performed and only experienced values has been used in passive harmonic filter design by far. As a experienced value, in cases of 5th and 7th filter, tuning factor(${\delta}$) is about 0.94 and 0.96 respectively and quality factor(Q) is, in all cases of, 50. If Single-tuned passive harmonic filter will be off-tuned, performance of filter will be decreased steeply and occur to parallel resonance between system reactance and filter capacitance. Therefore During the operation, In order not to off-tuning, Filter must be tuned at former order than actual tuning order. This is the same that total impedance of filter must have a reactive impedance. In this paper, Tuning factor(${\delta}$) is decided via example of real system and using the bode-plot and then performance of filters confirmed by filter current absorbtion rate. And Quality factor(Q) decided using the bode plot in example system and then performance of filters confirmed by filter current absorbtion rate also, which makes a calculated filter parameters to satisfy IEEE-519 distortion limits. Finally, Performance of the designed passive harmonic filter using the tuning factor(${\delta}$) and quality factor(Q) values, decided in this paper is verified by experiment and shows that 5th, 7th, 9th, 11th and 13th current harmonic distortions are decreased within IEEE-519 distortion limits, respectively.