• The Korean Journal of Zoology
• /
• v.39 no.1
• /
• pp.36-46
• /
• 1996

An endogenous phenoloxidase (EPO) from earthworm, Lumbricus rubellus, has been purified and characterized. The purified EPO using ammonium sulfate fractionation, Blue-2, Phenyl-, and Q-sepharose chromatography steps was revealed in SDS-PAGE as a single protein banri with Mr. of 59 kl)a. A native strudure of the enzyme was examined with an in situ staining of a nondenatudng-PAGE using DL-dopa as a substrate. The result showed that a single band due to the EPO activity was located siighdy above a standard polypeptide with Mr. of 210 kl)a. These fads indicate that the EPO is an oligomeric enzyme. The presence of a monophenolase activity of the purified EPO, which hydroxylates tyrosine to dopa, was confirmed by observing dopachrome accumulation at 475 nm at PH 8.0 with a typical lag phase during 60 mm. of meausrement. A series of inhibition study has been performed for the enzyme with several divalent cation chelators such as phenyithiourea (Flu), 1, lO-phenanthroline, EDTA, and EGTA. Among them, only V'flj inhibited the enzyme with 1C0.5 of 65 MM, which indicated that copper was critical for the catalysis of EPO. The enzyme was maximally active at 35'C and pH 8.0 when L-dopa to dopachrome conversion was spectrophotometricaily monitored at 475 nm. The apparent Km values of P0 for L-opa were obtained as 1.86 mM and 13.8 mM at pH 6.5 and 8.0, respectively. The catalytic efficiencies at both pH were almost identical [(kat/Km)pH8.0/(kcat/Km)pH6.5 = O.92] while the Vmax at p11 8.0 was 6.6-fold higher than that at pH 6.5. This fact may indicate that pH affeds the catalysis at substrate and/or enzyme-substrate complex level rather than the enzyme itself. Taken together, the EPO was an oligomeric enzyme which did not require proteolysis for its activation. These results also indicated that the enzyme can exist, at least, in part as a latent form In vivo, which might be distinct from the prophenoloxidase activating system. Therefore, it is pertinent to consider that there must be certain regulatory molecules or phenomena in L. rubellus which make the 1,0 in a latent form in vivo before the foreign invasions.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.2
• /
• pp.89-94
• /
• 1987

The fluctuations of sea surface temperatures (SST) and their anomalies in the Tsushima Current region are studied by means of empirical orthogonal function (EOF) analysis of the monthly SST data for 30 years (1941-1970) at 8 coastal stations. The overall features of the seasonal variation of SST are described by the first EOF mode, which explains $97.2\%$ of the total variance. Annual ranges of seasonal variation of SST and root-mean-square amplitudes of SST anomalies in the downstream of the Tsushima Current are larger than those in the upstream. The SST anomalies in the Tsushima Current region consist of simultaneous fluctuations, which explain $40.9\%$ of the total variance, and 'see-saw' fluctuations of which rise and fall in the upstream are opposite to those in the downstream. The latter second EOF mode explains $19.3\%$ of the total variance. We generated the low-pass (periods longer than 24 months), band-pass (periods between 6 and 24 months) and high-pass (periods shorter than 6 months) SST anomaly series and analyzed them by EOF method. The spatial distributions of the first and second EOF modes of all filtered SST anomalies are similar to each other.

• Microbiology and Biotechnology Letters
• /
• v.37 no.3
• /
• pp.197-203
• /
• 2009

An indole oxygenase originated from Rhodococcus sp. RHA1 was cloned into the expression vector, pTrc99A, in Escherichia coli, and designated pTCAN1. The pTCAN2 was constructed from pTCAN1 by the deletion of $lacI^q$ for the constitutive expression of indole oxygenase without adding IPTG in the medium. The complete open reading frame of indole oxygenase was 1,224 bp long, which encodes a protein of 407amino acids. Crude extracts of E. coli $DH5{\alpha}$/pTCAN1 and pTCAN2, respectively, were prepared and subjected to SDS-PAGE analysis. A band corresponding to molecular mass of about 43 kDa was appeared and this result correlated with the predicted molecular mass of cloned indole oxygenase. The E. coli harboring pTCAN1 and pTCAN2, respectively, showed blue color colony in LB plate. The pigment showing blue color was prepared from E. coli $DH5{\alpha}$/pTCAN2, and identified as indigo by experiments using spectrophotometer, HPLC, and TLC. The indigo-forming activity of indole oxygenases from the whole cell of E. coli $DH5{\alpha}/pTCAN1$ cultured at LB medium added 1mM of IPTG and that of E. coli/pTCAN2 showed about 1.75nmol/min/mg DCW (dry cell weight) and 3.85 nmol/min/mg DCW, respectively. Also, the E. coli $DH5{\alpha}$/pTCAN2 produced about $236{\mu}M$ of indigo after 48 hours incubation in TB medium supplemented with 2.5 mM of tryptophan.

• Journal of Sensor Science and Technology
• /
• v.23 no.3
• /
• pp.185-191
• /
• 2014

The width of depletion region in a varactor diode can be modulated by varying a reverse bias voltage. Thus, the preferred characteristics of depletion capacitance can obtained by the change in the width of depletion region so that it can select only the desirable frequencies. In this paper, the TV tuner varactor diode fabricated by hyper-abrupt profile control technique is presented. This diode can be operated within 3.3 V of driving voltage with capability of UHF band tuning. To form the hyperabrupt profile, firstly, p+ high concentration shallow junction with $0.2{\mu}m$ of junction depth and $1E+20ions/cm^3$ of surface concentration was formed using $BF_2$ implantation source. Simulation results optimized important factors such as epitaxial thickness and dose quality, diffusion time of n+ layer. To form steep hyper-abrupt profile, Formed n+ profile implanted the $PH_3$ source at Si(100) n-type epitaxial layer that has resistivity of $1.4{\Omega}cm$ and thickness of $2.4{\mu}m$ using p+ high concentration Shallow junction. Aluminum containing to 1% of Si was used as a electrode metal. Area of electrode was $30,200{\mu}m^2$. The C-V and Q-V electric characteristics were investigated by using impedance Analyzer (HP4291B). By controlling of concentration profile by n+ dosage at p+ high concentration shallow junction, the device with maximum $L_F$ at -1.5 V and 21.5~3.47 pF at 0.3~3.3 V was fabricated. We got the appropriate device in driving voltage 3.3 V having hyper-abrupt junction that profile order (m factor) is about -3/2. The deviation of capacitance by hyper-abrupt junction with C0.3 V of initial capacitance is due to the deviation of thermal process, ion implantation and diffusion. The deviation of initial capacitance at 0.3 V can be reduced by control of thermal process tolerance using RTP on wafer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.126-135
• /
• 2007

This paper proposes a new miniaturization method for a parallel coupled line filter with enhanced bandwidth characteristics. A previous method incorporated several advantages, such as size reduction through the use of only a small number of capacitors, in addition to grounding, suppression of harmonic characteristics, and improved skirt characteristics for the parallel coupled line filter, which is conventional in the field of RE filters due to its design and fabrication simplicity. However, the previous method also has disadvantages related to the bandwidth shrinkage of the miniaturized filters. In this paper, the amount of bandwidth shrinkage is analyzed in terms of the relationship between the loaded Q(quality factor) and the group delay of a resonator. Moreover, the reduction in the bandwidth is solved by a design with new design equations. To show the validity of the proposed method, a hairpin filter with a center frequency of 5.2 GHz and an fractional bandwidth(FBW) of 10% was scaled down to half its original dimension by the proposed method with the enhanced bandwidth characteristics. The measured result shows a high level of agreement with theoretical results.

• Journal of the Korean Chemical Society
• /
• v.50 no.1
• /
• pp.32-36
• /
• 2006

films of gold nanoparticles were formed on indium tin oxide (ITO) by an electrodeposition method from an aminosilicate stabilized gold colloid solution. The thin films were examined by cyclic voltammetry (CV), scanning electron microscopy (SEM), UV-visible, and energy dispersive X-ray spectroscopy (EDXS). The surface coverage of gold nanoparticles on the thin film was estimated to 1.2 nanomole/cm2. An anthraquinone-2, 6-disulfonic acid, disodium salt (AQDS) self-assembled layer was generated by immersing gold thin film into 1mM of AQDS in 0.1M HClO4 solution for over 20 hours. As a result, a new absorbance peak from the multi-layers (AQDS/thin film of gold /ITO) was obtained about at 690 nm. Also, the surface plasmon absorption of multi-layers was measured by UV-Visible spectrometer along with chronoamperometry by applying the various potentials from +0.5V to -0.5V. The maximum surface plasmon absorption band at 550 nm was decreased by applying negative potentials. The change of absorbance was correlated with the surface coverage of the AQDS indicating the pseudo-capacity surface state of the AQDS layer was coupled to the energy level of the plasmonband by applied negative potentials.

• Korean Journal of Optics and Photonics
• /
• v.16 no.5
• /
• pp.469-475
• /
• 2005

An integrated photonic microwave bandpass filter has been proposed and demonstrated incorporating a coherently coupled microring resonator in low-loss polymers. The proposed device may feature compact site, simple structure, tuning via the thermooptic and electrooptic effect, and flexible integration with other electrical and optical devices. The resonator was designed to have an extremely small bandwidth so that it could be used to selectively pass the optical signal carrying the microwave signal to attain efficient bandpass filtering. We made and tested two resonators with a single ring and double rings, and performed a theoretical fitting of their measured transfer curves to predict the performance of the microwave filters based on them precisely. It was found that as the number of the rings used for the resonator increases, the bandwidth gets smaller, the rolloff sharper, and the band rejection higher. Finally our filter exhibited the center frequency of 10GHz, the 3-dB bandwidth of 1.0GHz, the corresponding quality (Q) factor of 10, and the rejection outside of the passband of more than 25dB.

• International journal of advanced smart convergence
• /
• v.10 no.4
• /
• pp.241-255
• /
• 2021

The human auricle is the first part to receive sound from the outside. In this part, the frequency range of human recognizable form is divided and organized. In this study, we propose modeling by applying a single sound source to the surface of the human auricle. This means that when the sound pressure of a low frequency (low frequency) sound enters the pinna, the impedance felt at the tip of a part of the non-linear surface of the pinna is mainly due to the tensile force at the end of the part of the non-linear surface of the pinna. By expressing the situation of moving at a very small speed, the characteristic impedance of the pinna was confirmed to be negative infinity, and it was also confirmed that the speed at the tip of a part of the non-linear surface of the pinna was 0 in the anti-resonance state. It was found that the wave propagation phenomenon that determines the characteristics of the filter is determined by how large the wavelength, kL, is compared to the length of the tip of a part of the non-straight surface of the pinna. Humans first receive sounds from outside through their ears. The auricle is non-linear and has a curved shape, and it is known that it analyzes frequencies while receiving external sounds. The human ear has an audible frequency range of 20Hz - 20,000Hz. Through the study, we applied the characteristics of the notch filter to hypothesize that the human audible frequency range is separated from the auricle, and applied filter theory to analyze it, and as a result, meaningful results were obtained. The curved part and the inner part of the auricle function as a trumpet, collecting sounds, and at the same time amplifying the weak sound of a specific band. The point was found and the shape of the envelope detected in the auricle was found. Selectivity for selecting sounds coming from the outside is the formula of the pinna that implements the function of Q. The function of distinguishing human-recognizable sound from the pinna from low to high through frequency analysis is performed in the pinna, and the 2-3kHz area, where human hearing threshold is the most sensitive, is also the acoustic impedance of the most recessed area of the pinna. It can be seen that starting from.

• Radiation Oncology Journal
• /
• v.20 no.1
• /
• pp.41-52
• /
• 2002

Purpose : 3D conformal radiotherapy, the optimum dose delivered to the tumor and provided the risk of normal tissue unless marginal miss, was restricted by organ motion. For tumors in the thorax and abdomen, the planning target volume (PTV) is decided including the margin for movement of tumor volumes during treatment due to patients breathing. We designed the respiratory gating radiotherapy device (RGRD) for using during CT simulation, dose planning and beam delivery at identical breathing period conditions. Using RGRD, reducing the treatment margin for organ (thorax or abdomen) motion due to breathing and improve dose distribution for 3D conformal radiotherapy. Materials and Methods : The internal organ motion data for lung cancer patients were obtained by examining the diaphragm in the supine position to find the position dependency. We made a respiratory gating radiotherapy device (RGRD) that is composed of a strip band, drug sensor, micro switch, and a connected on-off switch in a LINAC control box. During same breathing period by RGRD, spiral CT scan, virtual simulation, and 3D dose planing for lung cancer patients were peformed, without an extended PTV margin for free breathing, and then the dose was delivered at the same positions. We calculated effective volumes and normal tissue complication probabilities (NTCP) using dose volume histograms for normal lung, and analyzed changes in doses associated with selected NTCP levels and tumor control probabilities (TCP) at these new dose levels. The effects of 3D conformal radiotherapy by RGRD were evaluated with DVH (Dose Volume Histogram), TCP, NTCP and dose statistics. Results : The average movement of a diaphragm was 1.5 cm in the supine position when patients breathed freely. Depending on the location of the tumor, the magnitude of the PTV margin needs to be extended from 1 cm to 3 cm, which can greatly increase normal tissue irradiation, and hence, results in increase of the normal tissue complications probabiliy. Simple and precise RGRD is very easy to setup on patients and is sensitive to length variation (+2 mm), it also delivers on-off information to patients and the LINAC machine. We evaluated the treatment plans of patients who had received conformal partial organ lung irradiation for the treatment of thorax malignancies. Using RGRD, the PTV margin by free breathing can be reduced about 2 cm for moving organs by breathing. TCP values are almost the same values $(4\~5\%\;increased)$ for lung cancer regardless of increasing the PTV margin to 2.0 cm but NTCP values are rapidly increased $(50\~70\%\;increased)$ for upon extending PTV margins by 2.0 cm. Conclusion : Internal organ motion due to breathing can be reduced effectively using our simple RGRD. This method can be used in clinical treatments to reduce organ motion induced margin, thereby reducing normal tissue irradiation. Using treatment planning software, the dose to normal tissues was analyzed by comparing dose statistics with and without RGRD. Potential benefits of radiotherapy derived from reduction or elimination of planning target volume (PTV) margins associated with patient breathing through the evaluation of the lung cancer patients treated with 3D conformal radiotherapy.