• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1478-1480
• /
• 1998

Inception and propagation of electrical tree and properties of partial discharge(PD) pulses accompanying with tree in low density polyethylene were discussed. We observed the characteristics of process of electrical tree by using optical microscope and investigated the statistical characteristics of the PD pulses by analyzing PD quantities and distribution patterns. The PD pulses were analyzed by q-n, $\phi$-n and $\phi$-q distribution. The statistical operators used were skewness(s), kurtosis(k) and average phase angle. The skewness and average discharge phase angle of PD pulses increased as the Propagation of tree. The kurtosis was about 1.8 at the Inception of tree, but It increased as the propagation of tree.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.1
• /
• pp.29-39
• /
• 2012

The maximum unit point resistance ($q_{max}$) of rock socketed drilled shafts subjected to axial loads was investigated by a numerical analysis. A 3D Finite Difference Method (FDM) analysis and a Distinct Element Method (DEM) analysis were performed with varying rock elastic modulus (E), discontinuity spacing ($S_j$), discontinuity dip angle ($i_j$), and pile diameter (D). Based on the results of obtained, it was found that the ultimate point resistance ($q_{max}$) increased as rock elastic modulus (E) and rock discontinuity spacing ($S_j$) increased. But, it was found that $q_{max}$ decreased as pile diameter (D) increased. As for the influence of the dip angle of rock discontinuity ($i_j$), it was shown that $q_{max}$ decreased up to 50% of maximum value within the range of $0^{\circ}$ < $i_j$ < $60^{\circ}$ due to the shear failure at rock discontinuities. Furthermore, it was found that if $20^{\circ}{\leq}i_j{\leq}40^{\circ}$, influence of $i_j$ should be taken into account because $q_{max}$ tended to approach a minimum value as $i_j$ approached a value near the friction angle of the discontinuity (${\phi}_j$).

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.51.2-51.2
• /
• 2018

Polarimetry is a powerful technique to investigate the physical properties of surface materials on airless bodies in the solar system. It is known that the degree of linear polarization changes as a function of the phase angle (the angle between Sun-target-Observer). Especially, the dependency of the polarization degree at large phase angle allows us to obtain information related to the particle size and porosity, which is difficult to be determined via other observation techniques (i.e., photometry and spectroscopy). However, despite the advantage, only a few asteroids were observed with polarimetric devices at large phase angles. Here, we present our new polarimetric research of Near-Earth Asteroids (NEAs) observed at the large phase angles. Among the NEAs, we focus on S- and Q-type asteroids, which include: (331471) 1984 QY1, (90075) 2002 VU94, and (66391) 1999 KW4. The observation was conducted using the Pirka 1.6-m Telescope at the Nayoro Observatory of Hokkaido University at the phase angles ${\alpha}{\sim}100degree$, which provides us the maximum polarization degrees of these objects. Considering the observational results together with two objects ((1566) Icarus and (4179) Toutatis) in reference papers [1], [2], we will discuss the implication of the regolith size on their surfaces.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.08a
• /
• pp.80.5-81
• /
• 2008

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.11
• /
• pp.959-964
• /
• 2007

To investigate the influence of partial discharge(PD) distribution characteristics due to various defects on the power cable joints interface, we used the K-means clustering method. As the result of PD number(n) distribution analyzing on $\Phi-n$ graph, the phase angle($\Phi$) of cluster centroid shifted to $0^{\circ}\;and\;180^{\circ}$ increasing with applying voltage. It was confirmed that the PD quantify(q) and euclidean distance of centroid were increased with applying voltage from the centroid distribution analyzing of $\Phi-q$ plane. The dispersion degree was increased with calculated standard deviation of the $\Phi-q$ cluster centroid. The PD number and mean value on $\Phi-q$ graph were some different by electric field concentration with defect types.

• Journal of Welding and Joining
• /
• v.7 no.4
• /
• pp.22-29
• /
• 1989

In this paper weld distortion both in butt and fillet welds by flux cored arc welding has been investigated by changing welding parameters such as heat input and plate thickness, and the weld distortion was expressed as a function of welding parameters adopting the inherent strain theory as proposed by Watanabe and Satoh in 1961. As results of the research it is proposed that transverse shrinkage in root pass butt welds in proportional to ln[(Q/t_-tan.theta.] where Q is heat input(cal/mm), t is plate thickness(mm), and 2.theta. is groove angle(degree), and angular distortion .phi.(radian) in one pass of fillet welds has the following relationship: .phi..var.(Q/ $t^{1.5}$)$^{3}$exp[-(Q/ $t^{1.5}$ )$^{2}$3/] These equations provide us with basic tools to predict the amount of weld distortion in welded structures.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.11
• /
• pp.1676-1680
• /
• 2004

We demonstrate that wide-angle X-ray scattering pattern from photoactive yellow protein (PYP) in solution using a high flux third generation synchrotron X-ray source reflects not only the overall structure, but also fine structures of the protein. X-ray scattering data from PYP in solution have been collected in q ranges from 0.02 ${\AA}^{-1}$ to 2.8 ${\AA}^{-1}$. These data are sensitive to the protein structure and consistent with the calculation based on known crystallographic atomic coordinates. Theoretical scattering patterns were also calculated for the intermediates during the photocycle of PYP to estimate the feasibility of time-resolved wide-angle X-ray scattering experiments on such proteins. These results demonstrate the possibility of using the wide-angle solution X-ray scattering as a quantitative monitor of photo-induced structural changes in PYP.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.2
• /
• pp.171-176
• /
• 2013

Classically, reluctance torque of IPMSM(Interior Permanent Magnet Synchronous Motor) by using inductance according to current phase angle generates an error. This error is affected by total torque. From current phase angle $0^{\circ}$ to large errors will occur, because reluctance torque include current phase angle. But, reluctance torque from steady-state voltage equation of IPMSM is represented by linkage flux. So, reluctance torque is unrelated to the current phase angle formula can be derived. In this paper, operating torque was analyzed by d, q-axis linkage flux of IPMSM and reluctance torque to perform calculations reduced the error of the total torque calculation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.79-86
• /
• 2002

Rock mass classifications form the back bone of the empirical design approach and are widely employed in rock engineering. In this paper the inter-relations were discussed among RMR, Q-system, RCR, N, M-RMR, RMi, and L-RMR. Several relationships for the assessment of the modulus of deformation of rock mass, Poisson's ratio, uniaxial compressive strength, tensile strength, cohesion and internal friction angle were also analysed and suggested.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.10 no.1
• /
• pp.47-61
• /
• 2015

Objectives : The purpose of this study is body parameters characteristics through posture analysis system of musculoskeletal problem patient Methods : Posture analysis system were performed for 164 patients to measure body parameters such as Q-angle, body inclination, neck inclination, PCMT(posterior cervical muscle tension), Knee flexion and posture balance. Statistical analysis using statistical analysis techniques and Pearson correlation coefficients was performed to assess the body parameters obtained by posture analysis system. Results : More than half of people out of 164 reported low back pain, 34.8% of the total was found to have neck pain. There was not a significant difference between genders from the characteristics of gender based body parameters expect for the statistical difference in Q angle, PCMT. There was a significant correlation between low back pain and multiple response status. There was a significant correlations between knee pain and Q angle. Also There was a significant correlations between pelvic pain and posture balance of ankle. Conclusions : Posture analysis system can be used to perform the analysis in place of X-ray measuring body posture and clinical parameters. The results of this study are expected to be the basis for further research on the clinical application of posture analysis system.