• The Korean Journal of Ecology
• /
• v.23 no.5
• /
• pp.407-421
• /
• 2000

The forest vegetation surrounding Taegu area was investigated by the methodology of the ZM school of phytosociology, from September, 1994 to August, 1997. The forest vegetation was classified into 7 communities, 8 subcommunities and 5 afforestations as follows : Quercus mongolica community (Typical subcommunity, Carex siderosticta subcommunity), Quercus variabilis community, Quercus acutissima community, Quercus dentate community, Carpinus cordata-Acer mono community (Typical subcommunity, Quercus serrata subcommunity, Cornus controversa subcommunity), Pinus densiflora community (Typical subcommunity, Sanguisorba officinalis subcommunity, Rhododendron schlippenbachii subcommunity), Lespedeza maximowiczii-Rhododendron mucronulatum community , Robinia pseudo-acacia afforestation, Pinus rigida afforestation, Larix leptolepis afforestation, Pinus thunbergii afforestation, Pinus koraiensis afforestation. The differential species of the Quercus mongolica community were Quercus mongolica, Athyrium yokoscense, Rhododendron schlippenbachii, Fraxinus sieboldiana, Acer pseudo-sieboldianum, Symplocos chinensis for. pilosa, Astilbe chinensis var. davidii, Weigela subsessilis, and Melampyrum roseum, those of the Carpinus cordata-Acer mono community were Acer mono, Carpinus cordata, Carpinus laxiflora, and Staphylea bumalda, those of the Pinus densiflora community were Pinus densiflora, Quercus serrata, Cocculus trilobus, and Juniperus rigida. Constance degree of the Quercus serrate was especially high in shrub and herb layers of the Pinus densiflora community. The results of factor analysis by DCA showed that distribution pattern of the communities were similar to that by Z-M method and that communities were arranged according to soil moisture gradient. Rhododendron schlippenbachii subcommunity of the P. densiflora community and the Typical subcommunity of the Q. mongolica community were distributed in similar environments.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.3
• /
• pp.191-198
• /
• 2007

The p53 which is well known as tumor suppressor gene is located at 17p13. p53 is a sequence-specific DNA binding transcription factor that responds to certain cytotoxic stresses, such as DNA damage, by enhancing the transcription of genes that regulate cell-cycle progression as well as programmed cell death. The p63 gene that is located at 3q27-29, is recognized members of the p53 family, and responsible for the transcription of 6 isoforms. Three isoforms ($TAp63{\alpha}$, $TAp63{\beta}$, $TAp63{\gamma}$) contain an N-terminal transactivation (TA) domain and can induce apoptosis. The other 3 isoforms (${\Delta}Np63{\alpha}$, ${\Delta}Np63{\beta}$, ${\Delta}Np63{\gamma}$) lack the TA domain and may function in a dominant-negative fashion by inhibiting the transactivation functions of p53 and TAp63 proteins, and thus act as oncoproteins. A number of studies have investigated the role of p63 in human squamous cell carcinomas from different organs. Only a few studies have examined ${\Delta}Np63$ isoform in oral squamous cell carcinoma including normal epithelium. This study aimed to evaluate expression of ${\Delta}Np63$ isoform in human oral squamous cell carcinoma tissue and normal mucosa. The 3 cases of well differenciated oral squamous cell carcinoma specimen including adjacent normal mucosa were examined, and immunohistochemical study with monoclonal antibody(4A4) and tumor cell apoptosis analysis with Transmission Electon Microscopy were studied. And, RT-PCR analysis was done for expression of ${\Delta}Np63$ isoform. The results were as followed. 1. Normal gingiva showed the restricted p63 expression in basal cell layer. 2. Well differentiated squamous cell carcinoma showed mainly p63 expression in overall area of malignancy, especially in basal cell layer to adjacent stromal tissue. 3. Tumor cells around keratinized area with no p63 expression disclosed less micro-organelle in decreased size cytoplasm and severe chromatin margination with nuclear destruction that means apoptosis. 4. Comparison of mRNA expression of ${\Delta}Np63$ isoform by RT-PCR showed variable expression of ${\Delta}Np63$ isoform, but ${\Delta}Np63{\alpha}$ was most highly expressed in all 3 tumor specimen. From theses results, it should be suggested that ${\Delta}Np63$ isoform expression in well differentiated squamous cell carcinoma was closely related to tumor oncogenesis, expecially overexpression of ${\Delta}Np63{\alpha}$ is a most important factor in tumor genesis of oral squamous cell carcinoma.

• Korean Journal of Materials Research
• /
• v.15 no.6
• /
• pp.413-418
• /
• 2005

Perovskite $Pb(Ni_{1/3}Nb_{2/3})O_3-Pb(Zr,Ti)O_3[PNN-PZT]$ ceramics were synthesized by conventional ceramic processing technique. In order to modify piezoelectric properties for sensor application in this system, NiO addition was considered to provide $Ni^{+2}$ as an acceptor, which was known to occupy with B site in the structure. The effect of NiO addition up to $8\;mol\%$ on the following piezoelectric properties as well as sintering properties was investigated. When NiO added more than $1\;mol\%$, average grain size was decreased and second phase was found to form. Moreover, the second phase caused decrease in relative dielectric constant $(\varepsilon_{33}T/\varepsilon0)$, electro-mechanical coupling factor $(k_p)$, and piezoelectric charge constant $(d_{33})$, while increasing mechanical quality factor $(Q_m)$. When $1\;mol\%$ NiO was added, density, dielectric properties and piezoelectric properties were abruptly increased.

• Journal of Astronomy and Space Sciences
• /
• v.33 no.3
• /
• pp.185-196
• /
• 2016

New multiband BVRI light curves of NSVS 1461538 were obtained as a byproduct during the photometric observations of our program star PV Cas for three years from 2011 to 2013. The light curves indicate characteristics of a typical W-subtype W UMa eclipsing system, displaying a flat bottom at primary eclipse and the O'Connell effect, rather than those of an Algol/b Lyrae eclipsing variable classified by the northern sky variability survey (NSVS). A total of 35 times of minimum lights were determined from our observations (20 timings) and the SuperWASP measurements (15 ones). A period study with all the timings shows that the orbital period may vary in a sinusoidal manner with a period of about 5.6 yr and a small semi-amplitude of about 0.008 day. The cyclical period variation can be interpreted as a light-time effect due to a tertiary body with a minimum mass of 0.71 M_⊙. Simultaneous analysis of the multiband light curves using the 2003 version of the Wilson-Devinney binary model shows that NSVS 1461538 is a genuine W-subtype W UMa contact binary with the hotter primary component being less massive and the system shows a low mass ratio of q(m_c/m_h)=3.51, a high orbital inclination of 88.7°, a moderate fill-out factor of 30 %, and a temperature difference of ΔT=412 K. The O'Connell effect can be similarly explained by cool spots on either the hotter primary star or the cool secondary star. A small third-light corresponding to about 5 % and 2 % of the total systemic light in the B and V bandpasses, respectively, supports the third-body hypothesis proposed by the period study. Preliminary absolute dimensions of the system were derived and used to look into its evolutionary status with other W UMa binaries in the mass-radius and mass-luminosity diagrams. A possible evolution scenario of the system was also discussed in the context of the mass vs mass ratio diagram.

• Korean Journal of Veterinary Research
• /
• v.46 no.4
• /
• pp.395-398
• /
• 2006

A 2-month-old female Shih-tzu dog was referred because of lameness, exercise intolerance, depression, elbow and stifle joint swelling. Physical examination, complete blood counts, serum-chemistry, radiography, synovial fluid analysis, antinuclear antibody test, and rheumatoid factor measurement were initiated. On radiography, soft tissue swelling of elbow and stifle joints without erosiveness were founded. The results of synovial fluid analysis revealed severe neutrophilic pleocytosis (nondegenerative), decreased viscosity, increased turbidity, positive on mucin-clot test, and negative on bacterial culture. The results of rheumatoid factor measurement and antinuclear antibody test were negative and below 1 : 40, respectively. Based on all tests, we diagnosed this case as juvenile onset type I immune-mediated polyarthritis. Azathioprine (1 mg/kg body weight, per os q 24 h, for 4 weeks) was then administered and clinical signs improved gradually. Four weeks after azathioprine administration, clinical signs were disappeared. This report describes the clinical findings, imaging characteristics, synovial fluid findings, and other laboratory results of type I immune-mediated polyarthritis and successful management with azathioprine therapy.

• Genomics & Informatics
• /
• v.9 no.4
• /
• pp.152-160
• /
• 2011

Hypertension is the major factor of most death and high blood pressure (BP) can lead to stroke, myocardial infarction and cardiac failure. Moreover, hypertension is strongly correlated with body mass index (BMI). Although the exact causes of hypertension are still unclear, some of genetic loci were discovered from genome-wide association study (GWAS). Therefore, it is essential to study genetic variation for finding more genetic factor affecting hypertension. The purpose of our study is to conduct a CNV association study for hypertension-related traits, BP and BMI, in Korean individuals. We identified 2,206 CNV regions from 3,274 community-based Korean participants using the Affymetrix Genome-Wide Human SNP Array 6.0 platform and performed a logistic regression analysis of CNVs with two hypertension-related traits, BP and BMI. Moreover, the 4,692 participants in an independent cohort were selected for respective replication analyses. GWAS of CNV identified two loci encompassing previously known hypertension-related genes: LPA (lipoprotein) on 6q26, and JAK2 (Janus kinase 2) on 9p24, with suggestive p-values (0.0334 for LPA and 0.0305 for JAK2 ). These two positive findings, however, were not evaluated in the replication stage. Our result confirmed the conclusion of CNV study from the WTCCC suggesting weak association with common diseases. This is the first study of CNV association study with BP and BMI in Korean population and it provides a state of CNV association study with common human diseases using SNP array.

• Journal of the Korean Ceramic Society
• /
• v.45 no.11
• /
• pp.701-706
• /
• 2008

High frequency dielectric ceramics have potential for applications in mobile and satellite communications systems at frequencies higher than 10GHz. The Ba$(Zn_{1/3}Ta_{2/3})O_3$ ceramics are known to have a high quality factor, a small temperature coefficient of the resonance frequency and a high dielectric constant. On the other hands, sintering at high temperature for extended time is required to obtain the ordered structure for high quality factor. In this study, the microwave dielectric properties of $ZrO_2$ and NiO-added Ba$(Zn_{1/3}Ta_{2/3})O_3$ ceramics prepared by solid-state reaction have been investigated. Adding $ZrO_2$ and NiO could effectively promote the densification even the case of decreasing the sintering time. At the surface of samples, secondary phase of Ba-Ta compounds was formed possibly due to the evaporation of ZnO, however, the interior of the samples remained as pure Ba$(Zn_{1/3}Ta_{2/3})O_3$. The samples sintered at $1600^{\circ}C$ for 2h exhibited 1:2 ordering of Zn and Ta cations. Excellent microwave dielectric properties of $Q{\cdot}f$(>96,000 GHz) and ${\varepsilon}_r$=30 has been obtained.

• Korean Journal of Materials Research
• /
• v.19 no.4
• /
• pp.198-202
• /
• 2009

For use in ultrasonic actuators, we investigated the structural and piezoelectric properties of $(1\;-\;x)Pb(Zr_{0.515}Ti_{0.485})O_3$ - $xPb(Sb_{1/2}Nb_{1/2})O_3$ + 0.5 wt% $MnO_2$ [(1 - x)PZT - xPSN + $MnO_2$] ceramics with a variation of x (x = 0.02, 0.04, 0.06, 0.08). All the ceramics, which were sintered at $1250^{\circ}C$ for 2 h, showed a typical perovskite structure, implying that they were well synthesized. A homogeneous micro structure was also developed for the specimens, and their average grain size was slightly decreased to $1.3{\mu}m$ by increasing x to 0.8. Moreover, a second phase with a pyrochlore structure appeared when x was above 0.06, which resulted in the deterioration of their piezoelectric properties. However, the 0.96PZT-0.04PSN+$MnO_2$ ceramics, which corresponds with a morphotropic phase boundary (MPB) composition in the (1 - x)PZT - xPSN + $MnO_2$ system, exhibited good piezoelectric properties: a piezoelectric constant ($d_{33}$) of 325 pC/N, an electromechanical coupling factor ($k_p$) of 70.8%, and a mechanical quality factor ($Q_m$) of 1779. The specimens with a relatively high curie temperature ($T_c$) of $305^{\circ}C$ also showed a significantly high dielectric constant (${\varepsilon}_r$) value of 1109. Therefore, the 0.96PZT - 0.04PSN + $MnO_2$ ceramics are suitable for use in ultrasonic vibrators.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.5C no.3
• /
• pp.102-110
• /
• 2005

Piezoelectric transformers(PT) are expected to be small, thin and highly efficient, and which are attractive as a transformer with high power density for step down voltage. For these reasons, we have attempted to develop a step-down PT for the miniaturized adaptor. We propose a PT, operating in thickness extensional vibration mode for step-down voltage. This PT consists of a multi-layered construction in the thickness direction. In order to develop the step-down PT of 10 W class and turn ratio of 0.1 with high efficiency and miniaturization, the piezoelectric ceramics and PT designs are estimated with a variety of characteristics. The basic composition of piezoelectric ceramics consists of ternary yPb(Zr$_{x}$Ti$_{1-x}$)O$_{3}$-(1-y)Pb(Mn$_{1/3}$Nb1$_{1/3}$Sb$_{1/3}$)O$_{3}$. In the piezoelectric characteristics evaluations, at y=0.95 and x=0.505, the electromechanical coupling factor(K$_{p}$) is 58$\%$, piezoelectric strain constant(d$_{33}$) is 270 pC/N, mechanical quality factor(Qr$_{m}$) is 1520, permittivity($\varepsilon$/ 0) is 1500, and Curie temperature is 350 $^{\circ}C$. At y = 0.90 and x = 0.500, kp is 56$\%$, d33 is 250 pC/N, Q$_{m}$ is 1820, $\varepsilon$$_{33}$$^{T}$/$\varepsilon$$_{0}$ is 1120, and Curie temperature is 290 $^{\circ}C$. It shows the excellent properties at morphotropic phase boundary regions. PZT-PMNS ceramic may be available for high power piezoelectric devices such as PTs. The design of step-down PTs for adaptor proposes a multi-layer structure to overcome some structural defects of conventional PTs. In order to design PTs and analyze their performances, the finite element analysis and equivalent circuit analysis method are applied. The maximum peak of gain G as a first mode for thickness extensional vibration occurs near 0.85 MHz at load resistance of 10 .The peak of second mode at 1.7 MHz is 0.12 and the efficiency is 92$\%$.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.151-162
• /
• 2006

The purpose of this thesis is to upgrade brand logo's equity by objective and professional evaluating tool. A brand logo is the main factor in making brand equity, but many times a brand logo is decided without objective judgment because making a logo is considered an intuitive process. To minimize the poor judgment by non-experts, a brand logo needs objective numerical grading tool. Thus, a brand logo is a factor in making a brand identity, not only brand image. That is why brand logo must be chosen by an expert's object judgment. The concrete method to obtain a objective, and at the same time professional grading tool which can De used for the developing and verifying process for a brand logo is as below-first, considering brand judgment from various angles through existing literature, I found various logo grading factors and then extracted them with professional identity designer's subjective consideration. second, applying extracted factors to actual logo grading, verify as a efficient design management tool