• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.4
• /
• pp.343-349
• /
• 1988

In order to get informations for breeding early barley cultivars, the thermosensitivity and low temperature growth ability about the breeding materials vernalized were tested at the high '||'&'||'amp; low temperature and field conditions. The temperature coefficient (Q10), ratio and thermosensitivity for plant height were various among cultivars versus temperature treatments. The early cultivars had greater Q10 values and insensitive responses to temperature changes. The Q10 and thermosensitivity for the time of flag leaf unfolding were various among cultivars, but the coefficient of variation in the thermosensitivity was greater, so the character would be more useful for investigating the varietal differences. The Q10 and thermosensitivity for plant height were not significantly correlated with Q10 and thermosensitivity for the time of flag leaf unfolding. The periods from heading to flowering were 2 to 4 days at the high temperature plot, but 1 to 11 days at the low temperature plot, showing much greater variations. In general the cultivars with greater difference of heading time between the high and low temperature plots were Suwon 218, SB 76588, Oweolbori, and Jogangbori, showing the sensitive thermophase and early heading.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.292-295
• /
• 2003

제주도 전역의 88개소에서 측정한 양수시험자료를 분석하여 투수량계수를 산출하였으며, 투수량계수계수와 비양수량의 관계식을 산출하였다. 제주도의 화산암 대수층은 대체로 투수성이 크고 대수층의 상.하부로부터 상당량의 지하수가 공급되므로 누수피압대수층이 적합한 모델로 판단된다. 투수량계수는 0.405~1038.52m$^2$/d로서 넓은 범위에 걸쳐서 분포하며 이는 제주도 화산 암의 투수성이 지역에 따라 다양하다는 것을 의미한다. 비양수량(Q/s)-투수량계수(T) 관계식은 T = 0.582(Q/s)$^{0.974}$ 로 계산되었으며, 이 관계식은 지역적으로 투수량계수 산출이 불가능할 경우에 비양수량만으로 투수량계수를 추정하는데 이용될 수 있다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.413-416
• /
• 2006

신제품이나 서비스의 수요 예측을 Bass 확산 모형을 토대로 수행할 때의 가장 큰 문제점은모형의 파라미터 추정에 필요한 데이터가 충분치 않다는 것이다. 따라서 Bass 확산 모형의 핵심적인 두 파라미터인 혁신 계수(p)와 모방 계수(q)의 추정을 시도할 때, 어느 정도의 데이터 개수가 요구되는 지를 파악하는 것은 매우 현실적인 중요성을 갖는 문제이다. 이제까지의 연구는 주로 기존의 판매 데이터를 토대로 Bass 모형의 파라미터를 추정할 때, 생기는 다양한 문제점 파악에 집중되었다. 시뮬레이션의 경우는 Bass 모형에 랜덤 오차를 추가하여 실시하였다. 이 경우 데이터 개수가 계수추정에 미치는 영향은 도출되나 각 계수별 민감도 분석이 제대로 이루어지지 못하는 한계를 가지고 있다, 따라서 본 논문에서는 시뮬레이션에서 예측치를 발생시킬 때 랜덤 오차 대신, 혁신 계수와 확산 계수의 변동을 주는 방법을 도입한다. 결과는 다음과 같다. 첫째, p 변동보다는 q 변동이 예측치의 오차에 대해 보다 중요하다. 둘째, 오차가 잠재수요의 30%이하로 떨어지기 위해서는 수요가 최대로 도달하는 시점이 $t^*$ 일 경우, $t^*\;+1$까지 데이터가 요구된다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.3 no.1
• /
• pp.27-35
• /
• 2001

Four road tunnels, which consists of biotite gneiss and granite gneiss and shows a similar geological conditions, were selected in this study. Laboratory and field tests, the rock mass rating for the four tunnels were conducted. A regression analysis was performed to find out the correlations of test results. It was proposed an equation of reduction factor which can assess the deformation modulus for biotite gneiss and granite gneiss. It was also found that there was a close correlation between Q and RQD in four tunnels according to the analysis between RMR and Q, RMR and RQD, Q and RQD and laboratory and field tests.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.383-390
• /
• 1998

이 연구의 목적은 경상분지에 설치되어있는 지진계에 기록된 자료를 이용하여 coda Q값을 계산하고 그것이 어느 정도 주파수에 의존하는 가를 추정해 보는 것이다. 분석한 주파수 영역은 1.5Hz에서 18Hz까지이다. 자료는 3조로 나누어 처리하였으며, 단일 산란 이론을 적용하였다. 그리고 매질의 특성을 살펴보고자 minimum mean free path 와 비탄성 감쇠계수를 계산했다. 계산 결과는 Q0값이 83.85 ~155.88로 단층대를 지나는 경로를 가진 자료에서 비교적 낮은 Q 값이 결정 되었고 n은 0.7615~1.0466이다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.1
• /
• pp.1-8
• /
• 2009

EMMC(Entrapped Mixed Microbial Cell) process which is a kind of active cell immobilizing method was applied to treat fisheries processing wastewater biologically. Kinetic constants were calculated for organic and nitrogen removal and effect of effluent recycling on system performance was evaluated also. Yield coefficient, Y showed relatively low value compared with Y value obtained from conventional activated sludge process. It means that EMMC process can reduce amount of excess sludge significantly compared with conventional activated sludge process. Endogenous respiration coefficient $k_e$ of EMMC process also showed relatively low value compared with that of conventional activated sludge process. Yield coefficient Y, endogenous respiration coefficient $k_e$ and half saturation constant $k_s$ obtained from EMMC process in terms of nitrification were compared with reported value from literature based on suspended growth nitrification system. The value of Y obtained from this study has no difference compared with values obtained from literature review and $k_e$ of this study was low but $k_s$ of this study was high compared than values obtained from suspended growth nitrification system. To evaluate the effect of internal recycling on system performance, system was operated with internal recycling ratio of 1.5Q, 2.0Q, 2.5Q and 3.0Q. increase of internal recycling ratio effect more greatly on improvement of denitrification efficiency than that of nitrification efficiency. Accordingly, optimization of internal recycling ratio has to be based on improvement of anoxic reactor performance.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.155-159
• /
• 2011

본 연구는 만곡수로 외측에 횡월류 위어를 설치하여 곡률반경에 대한 횡월류 유량계수의 특성을 분석하였다. 곡률반경의 변화에 따른 만곡부의 중심각이 180인 수로모형을 설계하였으며, FLOW-3D모형에 적용하여 유량계수를 산정하고 직선 수로와 비교하여 유량계수의 특성을 분석하는데 목적이 있다. 난류모형은 RNG-$\in$ 모형을 사용하였으며, 수치기법으로는 유한체적법을 사용하였다. 모형의 적용성 검정을 위해 기존에 연구되었던 수리실험과 동일한 조건의 수치모의를 수행하여 모형의 적용성을 확인하였다. 본 연구에서는 하폭를 고정시키고 곡률반경를 변화시킴으로써 $R_c/b$의 변화에 따른 유량계수(C)의 변화를 분석하고, 만곡수로의 월류량($Q_{wc}$)에 대한 직선수로의 월류량($Q_{ws}$)의 비, 만곡수로의 평균 월류 수심에 대한 직선수로의 평균 월류 수심($y_{cave}/y_{save}$)과 $R_c/b$의 관계를 분석하였다. 분석결과 유량계수는 상류수심, 월류량, 만곡수로의 곡률반경 등의 변화에 따라 유량계수는 변화하였으며, 직선과 만곡수로에 대해 분석을 수행하였기 때문에 직선수로의 영향인자를 이용하여 만곡수로에 설치된 횡월류 위어의 월류량과 유량계수를 추정 가능할 것이라 판단된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.108-113
• /
• 2014

This paper presents the influence on the transmission characteristics of swelling in rectangular waveguides for Q-band. We derived the Green's functions of the waveguide with eigenfunction expansion method. The reflection coefficient of the waveguide with a swelling is calculated by using internal impedance in order to investigate the influence of swelling in the waveguide. In order to check the validity of the theoretical analysis, the calculated reflection coefficients are compared with the measured results.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.1
• /
• pp.26-32
• /
• 2008

UBSS (unde-determined blind source separation) is composed of the stages of BMMR (blind mixing matrix recovery) and BSR (blind source recovery). Generally, these two stages are executed using the sparseness of the observed data, and their performance is influenced by the accuracy of the measure of the sparseness. In this paper, as introducing the measure of the sparseness using the Gini coefficient to BSR stage, we obtained more accurate measure of the sparseness and better performance of BSR than methods using the $l_1$-norm, $l_q$-norm, and hyperbolic tangent, which was confirmed via computer simulations.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.7
• /
• pp.1015-1020
• /
• 2018

The cavity resonator is one of the widely used components in the microwave applications. The unloaded Q, the resonant frequency, and the coupling factor are basic parameters of a cavity. A simple unloaded Q factor measurement procedure of a cavity is proposed in a lossy coupling. The equivalent circuit of a cavity with coupling loss at near the resonant frequency is presented. The coupling loss resistance was found by the measurement of a cavity impedance. The cavity impedance compensated coupling loss was redrawn on the Smith Chart. The loaded Q and coupling factor were obtained based on the compensated impedance locus and then the unloaded Q factor was calculated. To verify the proposed procedure, the cavity with lossless coupling was measured. The two measurement results in the lossy and lossless coupling agree well. The results confirm the proposed procedure is valid.