• 제목/요약/키워드: Q·f0.

검색결과 665건 처리시간 0.037초

전기투석과 이온교환수지를 이용한 스테인레스 산업의 산세폐수 내 질산성 질소의 제거 (Removal of Nitrate-Nitrogen in Pickling Acid Wastewater from Stainless Steel Industry Using Electrodialysis and Ion Exchange Resin)

  • 윤영기;박연진;오상화;신원식;최상준;류승기
    • 한국환경과학회지
    • /
    • 제18권6호
    • /
    • pp.645-654
    • /
    • 2009
  • Lab-scale Electrodialysis(ED) system with different membranes combined with before or after pyroma process were carried out to remove nitrate from two pickling acid wastewater containing high concentrations of $NO_3\;^-$(${\approx}$150,000 mg/L) and F($({\approx}$ 160,000 mg/L) and some heavy metals(Fe, Ti, and Cr). The ED system before Pyroma process(Sample A) was not successful in $NO_3\;^-$ removal due to cation membrane fouling by the heavy metals, whereas, in the ED system after Pyroma process(Sample B), about 98% of nitrate was removed because of relatively low $NO_3\;^-$ concentration (about 30,000 mg/L) and no heavy metals. Mono-selective membranes(CIMS/ACS) in ED system have no selectivity for nitrate compared to divalent-selective membranes(CMX/AMX). The operation time for nitrate removal time decreased with increasing the applied voltage from 10V to 15V with no difference in the nitrate removal rate between both voltages. Nitrate adsorption of a strong-base anion exchange resin of $Cl\;^-$ type was also conducted. The Freundlich model($R^2$ > 0.996) was fitted better than Langmuir mode($R^2$ > 0.984) to the adsorption data. The maximum adsorption capacity ($Q^0$) was 492 mg/g for Sample A and 111 mg/g for Sample B due to the difference in initial nitrate concentrations between the two wastewater samples. In the regeneration of ion exchange resins, the nitrate removal rate in the pickling acid wastewater decreased as the adsorption step was repeated because certain amount of adsorbed $NO_3\;^-$ remained in the resins in spite of several desorption steps for regeneration. In conclusion, the optimum system configuration to treat pickling acid wastewater from stainless-steel industry is the multi-processes of the Pyroma-Electrodialysis-Ion exchange.

조혈모세포이식을 받은 한국 성인 백혈병환자에서 cyclosporine의 집단약동학 분석 (Population Pharmacokinetics of Cyclosporine after Hematopoietic Stem Cell Transplantation in Leukemic Patients)

  • 김승희;김경임;윤휘열;강원구;윤성수;신완균;이혜숙;오정미
    • 한국임상약학회지
    • /
    • 제20권1호
    • /
    • pp.9-16
    • /
    • 2010
  • Purpose: 본 연구는 한국인 성인 조혈모세포이식환자를 대상으로 경구용 사이클로스포린의 집단약동학 분석을 통하여 사이클로스포린의 약동학적 파라미터에 영향을 미치는 요인 분석을 실시하고자 하였다. Methods: 2000년 12월부터 2006년 8월까지 서울대학교병원에서 동종조혈모세포이식을 받고 면역억제제로 사이클로스포린을 복용한 성인 백혈병환자를 대상으로 후향적으로 자료를 수집하였다. 사이클로스포린의 약동학에 영향을 미치는 인자로는 연령, 성별, 이식 후 날짜, 신기능, 공여자와의 관계, 질병의 종류, 혈중 빌리루빈 농도, 사이클로스포린의 대사를 유도하는 프레드니솔론의 투여량, 헤마토크리트, 사이클로스포린의 대사를 저해하는 약물의 병용여부 등을 검토하였다. 분석은 NONMEM$^{(R)}$ VI 프로그램을 이용하였으며, 변수를 추가하지 않은 기본 모형을 만든 후에 단계적인 요인의 추가와 제거를 통해 최종모형을 제작하였다. Results: 최종 상관 모형은 다음과 같다; CL/F (L/h) = $85.6{\times}e^{(0.646\;{\times}\;HCT/28.9\;+\;0.0464\;{\times}\;Gender)}$. 사이클로스포린의 겉보기 클리어런스는 환자의 성별이 남자일 때 또는 헤마토크릿이 감소할수록 증가하였다. 그 외 파라미터는 다음과 같이 계산되었다; $K_{\alpha}=0.0787\;(h^{-1})$; Q=57.1(L/kg/h); $V_{d-central\;compartment}$=1,100 (L); $V_{d-peripheral\;compartment}$ = 213,000(L). 개체간 편차는 40% 미만이었으며, 개체내 편차를 포함하는 잔차는 24.02%였다. Conclusions: 사이클로스포린의 약동학적 특징과 그 클리어런스에 영향을 끼칠 수 있는 임상적 요인을 이해하는 것은 환자 개개인의 용량과 용법의 결정 및 이상반응 발생의 예방에 유용할 수 있다. 한국인 조혈모세포이식환자에서 사이클로스포린의 약동학에 영향을 미치는 최종 파라미터를 구한 본 연구의 결과는 조혈모세포이식을 받은 한국인 성인환자에서 사이클로스포린의 모니터링 및 용량조절에 유용할 것으로 전망된다.

Effects of Partial or Total Replacement of Maize with Alternative Feed Source on Digestibility, Growth Performance, Blood Metabolites and Economics in Limousin Crossbred Cattle

  • Shi, F.H.;Fang, L.;Meng, Q.X.;Wu, H.;Du, J.P.;Xie, X.X.;Ren, L.P.;Zhou, Z.M.;Zhou, B.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제27권10호
    • /
    • pp.1443-1451
    • /
    • 2014
  • Increasing cost and scarcity of maize has stimulated the use of alternative feed sources (AFS) in the diets of cattle. In this study, we investigated the effects of partial or total replacement of maize on nutrient digestibility, growth performance, blood metabolites, and economics in Limousin crossbred feedlot cattle. Forty-five $Limousin{\times}Luxi$ crossbred bulls were randomly assigned to the three treatment groups, orthodox diet (OD; 45.0% maize), partial replacement diet (PRD; 15% maize, 67% AFS), total replacement diet (TRD; 0% maize, 100% AFS). The growth feeding trial lasted for 98 days. Dry matter intake (DMI) and average daily gain (ADG) were recorded. The digestion trial was carried out after the end of the growth trial. Total faeces and feed samples were measured daily. Digestibilities of dry matter (DM) and organic matter (OM), crude protein (CP), neutral detergent fiber (NDF) and acid detergent fiber (ADF) were calculated. After the feeding trial, blood metabolites were measured in 12 animals from each group. Initial and final body weights did not differ significantly among treatment groups (p>0.05). The ADG and DMI were 1.72 and 8.66, 1.60 and 9.10, and 1.40 and 9.11 kg/d for OD, PRD, and TRD, respectively. The PRD and TRD exhibited lower ADG (p<0.01) and higher DMI (p<0.01) than OD. The DMI (%body weight) was comparable between groups (p>0.5). Feed efficiency of PRD and TRD were lower than OD (p<0.01). The DM digestibility decreased with reduced level of maize (p = 0.10), OM digestibility was higher in OD (p<0.05), and CP, NDF and ADF digestibilities were similar for all groups (p>0.05). Blood urea nitrogen (mg/dL) in PRD and TRD was higher than OD (p<0.01), while other blood parameters did not differ significantly. Feed costs ($/head/d) were 1.49, 0.98, and 0.72 for OD, PRD, and TRD, respectively (p<0.01). Feed costs per kg gain ($) were significantly lower for PRD (0.63) and TRD (0.54) than OD (0.89; p<0.01). Overall profit ($/head) and daily profit ($/head/d) did not differ significantly between treatments (p>0.05), although TRD showed the highest economic benefits overall (p<0.01). While a traditional diet maximized the growth rate, partial or total replacement of dietary maize with AFS proved economically feasible due to their lower costs and comparable nutrient digestibilities of DM, CP, NDF, and ADF. Partial replacement may prove economically competitive in the current situation of China.

송이산 소나무림 생태계에서 엽면적지수와 생리적활동 및 토양수분의 변화 (Changes of Leaf Area Index, Physiological Activities and Soil Water in Tricholoma matsutake Producing Pine Forest Ecosystem)

  • 구창덕;가강현;박원철;박현;류성렬;박용우;김태헌
    • 한국산림과학회지
    • /
    • 제96권4호
    • /
    • pp.438-447
    • /
    • 2007
  • 이 연구의 목적은 송이산 소나무림생태계의 구조와 기능, 그리고 토양 수분동태를 이해하는 것이다. 연구는 충북 괴산군 칠성면 속리산국립공원내 쌍곡의 송이산 소나무림에서, 생태계 구조에 속하는 식생구성 및 엽면적지수 그리고 기능에 속하는 광합성, 증산, 목부수분포텐셜과 토양수분변동을 측정분석하였다. 송이산의 수직적 구조로써 주요 상층식생은 소나무였고, 중층은 신갈나무, 하층은 진달래, 철쭉, 신갈나무, 쇠물푸레나무였다. 송이산의 엽면적지수는, 6월~9월에 3.8, 10월에 2.6, 11월~4월에는 2.1로 연중 변하였다. 수목들의 광합성은 8월말에 $6.0{\sim}7.0{\mu}mol\;CO_2/m^2/s$였으나, 10월 말경에는 소나무 $4.0{\mu}mol\;CO_2/m^2/s$, 신갈나무 $2.0{\mu}mol\;CO_2/m^2/s$, 철쭉은 마이너스 값이었고, 쇠물푸레나무는 낙엽되었다. 수목들의 증산량은 8월말경에 $2.5{\sim}3.5mmol\;H_2O/m^2/s$, 10월 중순경에는 약 $1.0 mmol\;H_2O/m^2/s$로 감소하였다. 신갈나무는 다른 활엽수보다 늦게까지 광합성과 증산작용을 하였다. 각 수종의 목부수분포텐셜은 소나무가 -10~ -22 bars, 진달래와 철쭉, 신갈나무, 쇠물푸레나무는 -5~-12 bars의 범위로 변화하였는데, 8월 말경이 -12 bars로 가장 낮았고, 10월 중순경에 -3 bars 정도였다. 송이산의 토양수분은 지형과 관련이 깊었다. 수분함량은 산능선부에서 7~11%, 중간인 산복에서 8~15%, 산록은 11~19%의 범위였다. 송이균환내부의 온도는 비균환보다 약 0.2~0.4 높은 경향이었고 송이원기 형성온도인 $19.0^{\circ}C$는 9월 중순경에 도달한 것으로 추정되었다. 송이균환의 수분은 비균환보다 약 0.5~2.0% 낮았다. 이것은 송이균환이 대사작용을 하면서 열이 발생하고 수분을 소비하고 있음을 나타낸다. 송이 발생에는 생태계의 구조와 기능이 복합적으로 관여하므로 이들의 관계에 대한 연구가 더욱 필요하다고 생각한다.

Strength and failure characteristics of the rock-coal combined body with single joint in coal

  • Yin, Da W.;Chen, Shao J.;Chen, Bing;Liu, Xing Q.;Ma, Hong F.
    • Geomechanics and Engineering
    • /
    • 제15권5호
    • /
    • pp.1113-1124
    • /
    • 2018
  • Geological dynamic hazards during deep coal mining are caused by the failure of a composite system consisting of the rock and coal layers, whereas the joint in coal affects the stability of the composite system. In this paper, the compression test simulations for the rock-coal combined body with single joint in coal were conducted using $PFC^{2D}$ software and especially the effects of joint length and joint angle on strength and failure characteristics in a rock-coal combined body were analyzed. The joint length and joint angle exhibit a deterioration effect on the strength and affect the failure modes. The deterioration effect of joint length of L on the strength can be neglected with a tiny variation at ${\alpha}$ of $0^{\circ}$ or $90^{\circ}$ between the loading direction and joint direction. While, the deterioration effect of L on strength are relatively large at ${\alpha}$ between $30^{\circ}$ and $60^{\circ}$. And the peak stress and peak strain decrease with the increase of L. Additionally, the deterioration effect of ${\alpha}$ on the strength becomes larger with the increase of L. With the increase of ${\alpha}$, the peak stress and peak strain first decrease and then increase, presenting "V-shaped" curves. And the peak stress and peak strain at ${\alpha}$ of $45^{\circ}$ are the smallest. Moreover, the failure mainly occurs within the coal and no apparent failure is observed for rock. At ${\alpha}$ between $30^{\circ}$ and $60^{\circ}$, the secondary shear cracks generated in or close to the joint tips, cause the structural instability failure of the combined body. Therefore, their failure models present as a shear failure along partial joint plane direction and partially cutting across the coal body or a shear failure along the joint plane direction. However, at ${\alpha}$ of $60^{\circ}$ and L of 10 mm, the "V-shaped" shear cracks cutting across the coal body cause its final failure. While crack nucleations at ${\alpha}$ of $0^{\circ}$ or $90^{\circ}$ are randomly distributed in the coal, the failure mode shows a V-shaped shear failure cutting across the coal body.

Isolation, Expression Pattern, Polymorphism and Association Analysis of Porcine TIAF1 Gene

  • Wang, Y.;Xiong, Y.Z.;Ren, Z.Q.;Zuo, B.;Lei, M.G.;Deng, C.Y.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제22권3호
    • /
    • pp.313-318
    • /
    • 2009
  • TIAF1 is a TGF-${\beta}$1-induced anti-apoptotic factor that plays a critical role in blocking TNF (tumor necrosis factor) cytotoxicity in mouse fibroblasts and participates in TGF-${\beta}$-mediated growth regulation. In this study, we obtained the full-length cDNA sequence of the porcine TIAF1 gene. Real-time PCR further revealed that the TIAF1 gene was expressed at the highest level in liver and kidney with prominent expressions detected in uterus, and lower levels detected in heart, spleen, lung, stomach, small intestine, skeletal muscle and fat of Large White pigs. Sequence analysis indicated that a 6 base-pair deletion mutation existed in the exon of the TIAF1 gene between Meishan and Large White pigs. This mutation induced deletion of Gln and Val amino acids. PCR-RFLP was used to detect the polymorphism in 394 pigs of a "Large White${\times}$Meishan" $F_{2}$ resource population and four purebred pig populations. The frequencies of the A allele (with a 6 bp deletion) were dominant in Chinese Meishan and Bamei pigs, and the frequencies of the B allele (no 6 bp deletion) were dominant in Large White and Landrace pigs. Association analyses revealed that the deletion mutation had highly significant associations (p<0.01) with meat marbling score of the thorax-waist longissimus dorsi (LD) muscle (MM1) and intramuscular fat percentage (IMF), and significant associations (p<0.05) with carcass length (CL). The results presented here supply evidence that the 6 bp deletion mutation in the TIAF1 gene affects porcine meat quality and provides useful information for further porcine breeding.

B2O3와 CuO가 첨가된 Ba(Mg1/3Nb2/3)O3 세라믹스의 저온소결과 마이크로파 유전특성 연구 (Low-temperature Sintering and Microwave Dielectric Properties of the B2O3 and CuO-added Ba(Mg1/3Nb2/3)O3 Ceramics)

  • 임종봉;손진옥;남산;유명재;이우성;강남기;이확주
    • 한국전기전자재료학회논문지
    • /
    • 제18권1호
    • /
    • pp.38-42
    • /
    • 2005
  • B$_2$O$_3$ added Ba(Mg$_{1}$3/Nb$_{2}$3/)O$_3$ (BBMN) ceramics were not sintered below 900 $^{\circ}C$. However, when CuO was added to the BBMN ceramic, it was sintered even at 850 $^{\circ}C$. The amount of the $Ba_2$B$_2$O$_{5}$ second phase decreased with the addition of CuO. Therefore, the CuO additive is considered to react with the B$_2$O$_3$ inhibiting the reaction between B$_2$O$_3$ and BaO. Moreover, it is suggested that the solid solution of CuO and B$_2$O$_3$ might be responsible for the decrease of the sintering temperature of the specimens. A dense microstructure without pores was developed with the addition of a small amount of CuO. However, a porous microstructure with large pores was formed when a large amount of CuO was added. The bulk density, the dielectric constant ($\varepsilon$$_{r}$) and the Q-value increased with the addition of CuO but they decreased when a large amount of CuO was added. The variations of those properties are closely related to the variation of the microstructure. The excellent microwave dielectric properties of Qxf = 21500 GHz, $\varepsilon$$_{r}$ = 31 and temperature coefficient of resonance frequency($\tau$$_{f}$) = 21.3 ppm/$^{\circ}C$ were obtained for the Ba(Mg$_{1}$3/Nb$_{2}$3/)O$_3$+2.0 mol%B$_2$O$_3$+10.0 mol%CuO ceramic sintered at 875 $^{\circ}C$ for 2 h.h.2 h.h.

저장기간에 따른 전통된장과 개량식된장의 이화학적 특성, 기능성분 및 대사체 분석 (Quality Characteristics and Composition Profile of Traditional Doenjang and Manufactured Doenjang during Storage Time)

  • 강희주;김진희;김리랑;김강성;홍상필;김민정;양혜정
    • 한국식품영양학회지
    • /
    • 제29권5호
    • /
    • pp.785-794
    • /
    • 2016
  • This research was conducted to evaluate quality changes in traditional Doenjang and manufactured Doenjang during a storage period of 8 weeks. Low-salt Doenjang and commercial Doenjang were purchased from different manufacturers and proximate analysis as well as changes in isoflavone, polyphenol, flavonoid contents of the samples were investigated using a mass spectrophotometer. The salinity of traditional Doenjang, low salt Doenjang, and commercial Doenjang were $13.2{\pm}1.15$, $7.17{\pm}2.74$, $10.67{\pm}0.35%$, respectively and the salt concentrations of the soybean pastes did not change during storage. After 8 weeks at $35^{\circ}C$, chromatic values of all the paste samples decreased somewhat, with traditional Doenjang exhibiting fewer changes as compared to manufactured Doenjang. Amino acid nitrogen, acidity, microbial population all tended to increase with time, although some samples showed fluctuations during the test period. Moreover, the total isoflavone contents of traditional Doenjang increased with storage time while that of manufactured Doenjang tended to decrease. The isoflavone aglycone was shown to be the highest in traditional Doenjang, while isoflavone glycoside was abundant in manufactured Doenjang. Total flavonoid contents showed similar trends regardless of samples; initial contents of total flavonoid was 0.6 mg/g which increased to more than twice to 1.4 mg/g at the end of storage period. Composition profile of Doenjang extracts was analyzed using UPLC-Q-ToF.

NaCl 농도별 토양 처리에 대한 4수종의 생장 반응 (Growth Responses of 4 Species to NaCl Concentration in Artificial Soil)

  • 박우진;서병수;박종민;최충호;최수민
    • 한국환경생태학회지
    • /
    • 제24권6호
    • /
    • pp.735-743
    • /
    • 2010
  • NaCl 처리에 대한 물푸레나무, 모감주나무, 상수리나무, 참느릅나무의 생장반응을 살펴보기 위하여 NaCl 용액을 0, 25, 50, 100, 200mM 농도로 4개월간 처리하고 생존율, 상대생장율 변화, 생체중 및 건물중, 잎의 색소함량을 분석하였다. NaCl 처리에 따라 토양의 pH와 EC가 증하였으며, 처리기간이 길어짐에 따라 4수종의 생장율은 뚜렷하게 감소하였다. 최종 생존율이 가장 높은 수종은 참느릅나무로서 200mM 처리구에서 15%의 생존율을 보였고, 나머지 3수종은 200mM 처리구에서 모두 고사하였다. 상대생장율, 생체중 및 건물중은 NaCl 처리기간이 길어짐에 따라 감소하였다. 총 엽록소 함량은 60일 후까지 증가하는 경향을 보이다가 감소하였으며, 모든 수종에서 NaCl 처리에 따른 총 엽록소 함량과 카로테노이드 함량의 변화는 크지 않았다. NaCl 처리 시 발생되는 산화적 스트레스에 대한 4수종의 생장반응을 종합한 결과 참느릅나무, 모감주나무, 물푸레나무, 상수리나무 순으로 내성이 큰 것으로 판단되었다.

$B_2O_3$ 와 CuO가 첨가된 $Ba(Mg_{1/3}Nb_{2/3})O_3$ 세라믹스의 저온소결과 마이크로파 유전특성 연구 (Low-Temperature Sintering and Microwave Dielectric Properties of the $B_2O_3-$ and CuO-added $Ba(Mg_{1/3}Nb_{2/3})O_3$ Ceramics)

  • 임종봉;손진옥;남산;유명재;이우성;강남기;이확주
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
    • /
    • pp.838-841
    • /
    • 2004
  • [ $B_2O_3$ ] added $Ba(Mg_{1/3}Nb_{2/3})O_3$ (BBMN) ceramics were not sintered below $900^{\circ}C$. However, when CuO was added to the BBMN ceramic, it was sintered even at $850^{\circ}C$. The amount of the $Ba_2B_2O_5$ second phase decreased with the addition of CuO. Therefore, the CuO additive is considered to react with the $B_2O_3$ inhibiting the reaction between $B_2O_3$ and BaO. Moreover, it is suggested that the solid solution of CuO and $B_2O_3$ might be responsible for the decrease of the sintering temperature of the specimens. A dense microstructure without pores was developed with the addition of a small amount of CuO. However, a porous microstructure with large pores was formed when a large amount of CuO was added. The bulk density the dielectric constant $({\varepsilon}_r)$ and the Q-value increased with the addition of CuO but they decreased when a large amount of CuO was added. The variations of those properties are closely related to the variation of the microstructure. The excellent microwave dielectric properties of Qxf=21500 GHz, ${\varepsilon}_r=31$ and temperature coefficient of resonance frequency$({\tau}_f)=21.3\;ppm/^{\circ}C$ were obtained for the $Ba(Mg_{1/3}Nb_{2/3})O_3+2.0\;mol%B_2O_3+10.0$ mol%CuO ceramic sintered at $875^{\circ}C$ for 2h.

  • PDF