• 한국안전학회지
• /
• 제19권2호
• /
• pp.47-53
• /
• 2004

Emulsion polymerization ws carried out using Alkyl methacrylate(RMA) like MMA, EMA, BMA and Styrene Monomer(SM) for core-shell latex preparation. It was synthesized at $80^{\circ}C$ in the presence of anionic surfactant SLS(Sodium Lauryl Sulfate). FT-IR and DSC analysis are used to confirm the synthesized core-shell emulsion latexes. Moreover DSC and TGA were used to investigate the thermal characterisitcs of them. The differences of the decomposition rate and the activation energy from TGA and DSC analysis are not so big. It considers that the pendent group is not affect of the thermal characteristics and stability on core-shell latexes, which is synthesized with RMA and Styrene. For investigating combustion products, LC50 values were calculated by FED(Fractional Effective Dose)from the Pyrolyzer-Mass sepctrometer.

• 한국안전학회지
• /
• 제21권6호
• /
• pp.38-45
• /
• 2006

Polymeric floorings mainly consisted of PVC are easily decomposed by many kinds of hot environmental factors, then generate hazardous asphyxiate gases and/or toxic gases etc. Therefore the mechanism of decomposition and quantitative toxic indices of products are very important for preventing safety and health disasters, especially in case of confined area. So we have investigated decomposition kinetics, numbers of process involved, toxicity indices of product and so on, using DSC, TGA, FT-IR and Pyrolyzer-GC/MS. The thermal decomposition process of polymeric floorings can be mainly divided by dehydrochlorinated reaction and polyene decomposition step, and activation energies of those are approximately $53.93{\sim}62.42kcal/mol$. Especially lethal concentration($LC_{50}$), fractional effective dose (FED) are calculated by measuring the amount of decomposition product. The values on $LC_{50}$ of sample G are ranged $2,003{\sim}2,019(mg/m^{3})$ in case of sample K and H are $1,877,\;1,998(g/m^{3})$ respectively. Even if the results are estimated by calculation method without animal test and/or clinical demonstration, these values could be very useful data for occupational health, hygiene and safety control.

• 한국군사과학기술학회지
• /
• 제14권2호
• /
• pp.289-298
• /
• 2011

TMAH-based Py-MS has been investigated to apply for a real-time classification of biological agents in the field. Acquiring reproducible data from mass spectrometry is a key to biological detection in the field. Nevertheless, it has been little studied on what factors could affect to the reproducibility of the TMAH-based Py-MS spectrum patterns. Given the TMAH-based Py-MS applied to the field system, several factors which could affect to the reproducible pattern of TMAH-based Py-MS spectra are needed to be examined, including changes in TMAH injection volume, growth temperature for microorganism, and number of cells collected in pyrolyzer, and implication of stabilizer used for lyophilization. This study showed that the reproducibility of the spectrum patterns was significantly hindered by changes in TMAH concentration and cell number, and stabilizer implication but not by growth temperature. Among those at low TMAH concentration(0.015m) was not observed the significant alterations of the spectrum pattern even when its injection volume was changed, yet was in different cell numbers and stabilizer implication.

• 한국연초학회지
• /
• 제25권2호
• /
• pp.103-110
• /
• 2003

This study was conducted to investigate the pyrolysis products of ι-menthol by Curie-Point pyrolysis. The pyrolysis of ι-menthol was performed at 16$0^{\circ}C$, 42$0^{\circ}C$, $650^{\circ}C$, and 92$0^{\circ}C$ by Curie-Point Pyrolyzer and their pyrolysis products were analyzed by GC/MSD. In addition, tobacco leaves added ι-menthol were pyrolyzed at the same condition in case of ι-menthol. The beginning temperature for pyrolysis formation was in the vicinity of 42$0^{\circ}C$ and the major components of the pyrolysis products identified were iso-menthol, 2-menthene, menthomenthene, and menthone. The amount of these components was increased by increasing temperature and the hydrocarbons such as hexadecene and pentadecene formed by ring cleavage were generated at 92$0^{\circ}C$. The yield of ι-menthol in pyrolysis of tobacco leaves was decreased as the temperature of pyrolysis was raised and the pyrolysis products of ι-menthol weren't identified in the pyrolysis of tobacco leaves. Also, to analyze the weight decrease, ι-menthol was analysed by thermal analyzer(TA), and then the weight decrease of ι-menthol was occurred in the vicinity of 18$0^{\circ}C$.

• 한국연초학회지
• /
• 제24권2호
• /
• pp.101-106
• /
• 2002

This study was conducted to investigate the pyrolysis products of patchouli oil by Curie-Point pyrolysis. The pyrolysis of patchouli oil was performed at the temperature of 16$0^{\circ}C$, 42$0^{\circ}C$, $650^{\circ}C$, 76$0^{\circ}C$, and 92$0^{\circ}C$ by Curie-Point Pyrolyzer. The pyrolysis products were analyzed by gas chromatography(GC) and mass selective detector(MSD). Total 21 components were identified in the pyrolyzates of patchouli oil. The temperature for maximum formation of most of these compounds was in the range of 76$0^{\circ}C$~92$0^{\circ}C$. The major components were $\beta$-patchoulene, $\alpha$-guaiene, $\beta$-caryophyllene, $\alpha$-patchoulene, seychellene, $\delta$-guaiene, and patchouli alcohol. The numbers of the pyrolyzed products of patchouli oil were increased by increasing temperature, however, the yields of major components such as patchoulene, guaiene, seychellene and patchouli alcohol decreased as the temperature of pyrolysis was raised to 92$0^{\circ}C$, the highest temperature in this experiment. The optimum temperature for formation of the pyrolysis products such as styrene, indane and naphthalene was at 92$0^{\circ}C$.

• Elastomers and Composites
• /
• 제22권1호
• /
• pp.11-19
• /
• 1987

A coil pyrolyzer and processor-controlled gas chromatograph were used for analysis of rubber for compounding ratio of the single and blend rubber vlucanizates. Variables such as sample size, pyrolysis temperature, time allowed for pyrolysis, the column packing material, its length and programmable temperature for gas chromatography were examined to obtain optimum condition for application to NR, BR and SBR blends. By application fixed conditions, three kinds of standard curves were finally obtained from thirty samples of blend vulcanizates which were prepared in the pilot plant, NIRI. It is possible to determine rubber composition and their ratio in NR, BR and SBR products by pyrolysis.

• Bulletin of the Korean Chemical Society
• /
• 제34권8호
• /
• pp.2399-2402
• /
• 2013

The catalytic pyrolysis of cellulose was carried out over SAPO-11 for the first time. Pyrolyzer-gas chromatography/mass spectroscopy was used for the in-situ analysis of the pyrolysis products. The acid sites of SAPO-11 converted most levoglucosan produced from the non-catalytic pyrolysis of cellulose to furans. In particular, the selectivity toward light furans, such as furfural, furan and 2-methyl furan, was high. When the catalyst/cellulose ratio was increased from 1/1 to 3/1 and 5/1, the increase in the quantity of acid sites led to the promotion of deoxygenation and the resultant increase of the contents of light furan compounds. Because furans can be used as basic feedstock materials, the augmentation of the economical value of bio-oil through the catalytic upgrading over SAPO-11 is considerable.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.81-87
• /
• 2003

Latex polymers are widely used for adhesive, binder, paint etc. Especially the PVAc(Polyvinyl acetate) latex which manufactured by vinyl acetate and vinyl alcohol as protective colloid is a useful environmentally friendly adhesive. To increase useful property of PVAc latex, this study was carried out for checking thermal characteristics and physical condition of PVAc latex by DSC, FT-IR, Pyrolyzer GC-MS. The activation energies of thermal decomposition for 40, 48, 56, 64% solid content of PVAc latex were found as 28.1-36.0kcal/mol by Kissinger's method and 17.2-22.0kcal/mol by DSC method. Actually, reasonable solid content could be consiered as 56% because of activation energy and adhesive characteristics. According to the effect of protective colloid for 4, 10, 15, 20wt%, the activation energy shows same tendency to both method and in case of l5wt% has been found as the highest activation energy. The mechanism of thermal decomposition was mainly estimated by main chain scission, not by side group on FT-IR analysis. Main component of Pyrolzer GC-MS result were consisted of $CH_3COOH$, $CH_3$, $H_2O$ and light gases(CO, $CO_2$, $CH_4$ etc).

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.474-477
• /
• 2006

유동형 급속열분해기((fluidized bed type fast pyrolyzer, 용량 300g/h)를 이용하여 너도밤나무와 침엽수 흔합재(독일가문비나무/전나무, 50:50)로부터 바이오오일을 생산하였다. 목질바이오매스의 열분해는 약 $470{\pm}5^{\circ}C$에서 1-2초 간 진행되었다. 목질바이오매스의 열분해 생성물의 조성을 살펴보면, 너도밤나무는 바이오오일이 약 60%, 탄이 약 9% 피리 고 가스가 31% 가량 생산되었으며, 침엽수 혼합재는 49%의 바이오오일, 9%의 탄, 그리고 42% 가량의 가스가 생성되었다. 두 종류의 목질바이오매스에서 생산된 바이오오일에는 약 17-22% 가량의 수분이 포함되어 있었으며, 비중은 약 1.2kg/L 이었다. 바이오오일의 원소 조성은 탄소가 45%, 산소가 47% 수소가 7%, 그리 고 질소가 1% 로서 일반적 인 목질바이오매스와 큰 차이는 없는 것으로 나타났다. 그러나 화석자원에서 생산되는 오일류와 비교하여 산소함량은 매우 높았으나 황은 전혀 포함하고 있지 않았다. 바이오오일의 GC분석 결과 총 90여종의 고리형, 또는 비고리형 저분자량 화합물이 검출되었으며 이들의 함량은 바이오오일 전건중량의 31-33% 정도로 측정되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권4호
• /
• pp.442-450
• /
• 2019

Despite its potential as a renewable source for fuels and chemicals, lignin valorization still faces technical challenges in many aspects. Overcoming such challenges associated with the chemical recalcitrance of lignin can provide many opportunities to innovate existing and emerging biorefineries. In this work, we leveraged a biomass genetic engineering technology to produce phenolic aldehyde-rich lignin structure via downregulation of cinnamyl alcohol dehydrogenase (CAD). The structurally altered lignin obtained from the Arabidopsis thaliana CAD mutant was pyrolyzed to understand the effect of structural alteration on thermal behavior of lignin. The pyrolysis was conducted at 400 and $500^{\circ}C$ using an analytical pyrolyzer connected with GC/MS and the products were systematically analyzed. The results indicate that aldehyde-rich lignin undergoes fragmentation reaction during pyrolysis forming a considerable amount of C6 units. Also, it was speculated that highly reactive phenolic aldehydes facilitate secondary repolymerization reaction as described by the lower yield of overall phenolic compounds compared to wild type (WT) lignin. Quantum mechanical calculation clearly shows the higher electrophilicity of transgenic lignin than that of WT, which could promote both fragmentation and recondensation reactions. This work provides mechanistic insights toward biomass genetic engineering and its application to the pyrolysis allowing to establish sustainable biorefinery in the future.