• 제목/요약/키워드: Pyrolysis at low temperature

검색결과 108건 처리시간 0.026초

저온 열분해시 HDPE 및 LDPE의 액화 특성 (Liquefaction Characteristics of HDPE and LDPE in Low Temperature Pyrolysis)

  • 이봉희;박수열;김지현
    • 한국응용과학기술학회지
    • /
    • 제23권4호
    • /
    • pp.307-318
    • /
    • 2006
  • The pyrolysis of high density polyethylene(HDPE) and low density polyethylene(LDPE) was carried out at temperature between 425 and $500^{\circ}C$ from 35 to 80 minutes. The liquid products formed during pyrolysis were classified into gasoline, kerosene, gas oil and wax according to the petroleum product quality standard of Korea Petroleum Quality Inspection Institute. The conversion and yield of liquid products for HDPE pyrolysis increased continuously according to pyrolysis temperature and pyrolysis time. The influence of pyrolysis temperature was more severe than pyrolysis time for the conversion of HDPE. For example, the liquid products of HDPE pyrolysis at $450^{\circ}C$ for 65 minutes were ca. 30wt.% gas oil, 15wt.% wax, 14wt.% kerosene and 11wt.% gasoline. The increase of pyrolysis temperature up to $500^{\circ}C$ showed the increase of wax product and the decrease of kerosene. The conversion and yield of liquid products for LDPE pyrolysis continuously increased according to pyrolysis temperature and pyrolysis time, similar to HDPE pyrolysis. The liquid products of LDPE pyrolysis at $450^{\circ}C$ for 65 minutes were ca. 27wt.% gas oil, 18wt.% wax, 16wt.% kerosene and 13wt.% gasoline.

고온 분무열분해 공정에 의한 녹색 발광의 BAM:Mn 형광체 합성 (Preparation of Green-Light Emitting BAM:Mn Phosphor Particles by High Temperature Spray Pyrolysis)

  • 주서희;구혜영;김도엽;강윤찬
    • 한국재료학회지
    • /
    • 제15권8호
    • /
    • pp.496-502
    • /
    • 2005
  • Green-light emitting $BaMgAl_{10}O_{19}:Mn^{2+}$ (BAM:Mn) phosphor particles were prepared by spray Pyrolysis. The effect of reactor temperature and flow rate of carrier gas in the spray Pyrolysis on the morphology, crystallinity and photoluminescence characteristics under vacuum ultraviolet were investigated. The morphology of the as-Prepared Particles obtained by spray Pyrolysis had spherical shape and non-aggregation characteristics regardless of the reactor temperature. The spherical shape of the as-prepared Particles obtained by spray pyrolysis at low temperature disappeared after Post-treatment. On the other hand the as-Prepared Particles obtained by spray Pyrolysis at $1600^{\circ}C$ maintained spherical shape and non-aggregation characteristics after post-treatment at $1400^{\circ}C$ for 3 h under reducing atmosphere. The BAM:Mn Phosphor Particles Prepared by spray Pyrolysis at different reactor temperatures had pure crystal structure and high photoluminescence intensities under vacuum ultraviolet after post-treatment. BAM:Mn phosphor particles prepared by spray Pyrolysis at low How rate of carrier gas had complete spherical shape and filed morphology and high photoluminescence intensity after post-treatment under reducing atmosphere.

폐전선으로부터 유가자원 회수를 위한 저온열분해(II) (Low Temperature Pyrolysis for the Recovery of Value-added Resources from Waste Wire (II))

  • 한성국;김재용
    • 공업화학
    • /
    • 제20권5호
    • /
    • pp.553-556
    • /
    • 2009
  • 본 연구의 목표는 열분해 기술의 문제점을 보완하여 유가자원의 회수와 폐기물 처리의 효율을 높이는데 있다. 우선 경제성을 높이기 위해 기존 열분해온도(보통 $500{\sim}1000^{\circ}C$)보다 낮은 $450^{\circ}C$에서의 저온열분해 반응을 시도하였다. 촉매를 사용하여 반응온도와 반응시간을 단축할 수 있었고, 무 산소 상태를 유지시키는데 유리하도록 간접열을 사용하였다. 결과적으로 유가자원인 구리와 합성연료유의 회수율을 증가시킬 수 있었고, 발생하는 부산물과 배가스의 처리효과가 뛰어남을 알 수 있었다. 배가스는 2단의 중화조를 통과시켜 다이옥신은 거의 발생되지 않았으며, 나머지 대기환경기준의 측정항목 또한 기준치 이하를 보였다. 이번 연구에서는 앞에서 말한 저온 열분해장치(GTPK-001)를 제작하였고, 경제적으로나 친환경적으로 상용화 개발이 가능함을 알 수 있었다.

Plug Flow Reactor 모델을 이용한 폐플라스틱의 열분해 특성 해석 (Analysis on the Pyrolysis Characteristics of Waste Plastics Using Plug Flow Reactor Model)

  • 최상규;최연석;정연우;한소영;응웬 반 꾸잉
    • 신재생에너지
    • /
    • 제18권4호
    • /
    • pp.12-21
    • /
    • 2022
  • The pyrolysis characteristics of high-density polyethylene (HDPE), low-density polyethylene (LDPE), and polypropylene (PP) were analyzed numerically using a 1D plug flow reactor (PFR) model. A lumped kinetic model was selected to simplify the pyrolysis products as wax, oil, and gas. The simulation was performed in the 400-600℃ range, and the plastic pyrolysis and product generation characteristics with respect to time were compared at various temperatures. It was found that plastic pyrolysis accelerates rapidly as the temperature rises. The amounts of the pyrolysis products wax and oil increase and then decrease with time, whereas the amount of gas produced increases continuously. In LDPE pyrolysis, the pyrolysis time was longer than that observed for other plastics at a specified temperature, and the amount of wax generated was the greatest. The maximum mass fraction of oil was obtained in the order of HDPE, PP, and LDPE at a specified temperature, and it decreased with temperature. Although the 1D model adopted in this study has a limitation in that it does not include material transport and heat transfer phenomena, the qualitative results presented herein could provide base data regarding various types of plastic pyrolysis to predict the product characteristics. These results can in turn be used when designing pyrolysis reactors.

대표적인 열분해가스화 용융시설의 공정별 다이옥신 배출거동에 관한 연구 (A study on the Dioxin behavior in the process of representative pyrolysis/gasfication/melting plant)

  • 신찬기;신대윤
    • 환경위생공학
    • /
    • 제22권1호
    • /
    • pp.1-16
    • /
    • 2007
  • The incineration process has commonly used for wastes amount reduction and thermal treatments of pollutants as the technologies accumulated. However, the process is getting negative public images owing to matter of hazardous pollutants emission. Specially dioxins became a main issue and is mostly emitted from municipal solid wastes incineration. In this reason, pyrolysis/gasfication/melting process is presented as a alternative of incineration process. The pyrolysis/gasfication/melting process, a novel technology, is middle of verification of commercial plant and development of technologies in Korea. But the survey about the pollutant emission from the process, and background data in these facilities is necessary. So in this survey, it Is investigated that the behavior of dioxins in three pyrolysis/gasfication/melting plant (S, T, P) of pilot scale. In case of S plant, concentration of dioxins shows high at latter part of cogenerated boiler and stack which are operate on low temperature conditions than a latter parts of pyrolysis and melting furnace which are operate on high temperature condition. Concentration of gas phage dioxins had increased after combusted gas passed cogenerated boiler and this is attributed to react of precursor materials such as chlorobenzene and chlorophenol. Concentration of dioxins in T plant showed lower levels at latter part of cooling equipment which are operate with water spray type on low temperature conditions than a latter parts of gasfied melting furnace which are operate on high temperature condition. Removal efficiency of dioxins at gas treatment equipment was 78.8 %. Concentration of dioxins in P plant was low at latter part of SDA/BF which is operate at low temperature conditions than a latter parts of pyrolysis gasfied chamber which are operate at high temperature condition. Removal efficiency of dioxins of SDA/BF was 85.9 % and therefore, it showed high efficiency at those of stoker type incineration facility. However, concentration of dioxins which emitted at high temperature condition were low in three facilities and satisfied present standard emission level of dioxins. To consider the distribution ratio of dioxins, Particulate phase dioxins at S and P plants showed similar ratio with which shows in current stoker type for middle scale domestic waste incineration facility. It is necessary to continuos monitoring the ratio of distribution of dioxins in T plant in because ratio of gas phage dioxins showed high.

高分子物質의 熱分解에 關한 硏究 (第4報) Polyethylene 및 Polypropylene의 熱分解에 關하여 (On the Pyrolysis of Polymers IV. Pyrolysis of Polythylene and Polypropylene)

  • 성좌경;노익삼;김정엽;장성봉
    • 대한화학회지
    • /
    • 제7권2호
    • /
    • pp.122-127
    • /
    • 1963
  • Pyrolysis fo polyethylene and polypropylene has been studied in order to clarify the mechanism of chain scission and effect of oxygen on degradation. Rate of weight decrease was measured under nitrogen and air atmosphere at constant temperature for the samples of high density polyethylene, low density polyethylene and isotactic polypropylene, and then gaseous hydrocarbons produced from pyrolysis were analysed by gas chromatography. Although there is little substantial difference between composition of hydrocarbon gases from pyrolysis of high density polyethylene and low density polyethylene except some difference in quantity of total gas produced, gas composition from polypropylene pyrolysis differs from that of polyethylene pyrolysis. Gases from pyrolysis under air contain much more unsaturated hydrocarbons than those from pyrolysis under inert gas.

  • PDF

폴리에틸렌 열분해 생성물의 분포 특성 (Distribution Characteristics of Pyrolysis Products of Polyethylene)

  • 이동환;최홍준;김대수;이봉희
    • 폴리머
    • /
    • 제32권2호
    • /
    • pp.157-162
    • /
    • 2008
  • LDPE, LLDPE 및 HDPE의 반응온도 및 반응시간에 따른 저온 열분해 특성을 연구하였다. 실험범위는 반응온도에 대하여 $425^{\circ}C$에서 $500^{\circ}C$이었고 반응시간은 35분에서 65분이었다. 열분해 생성물들은 한국석유품질검사소의 석유제품 품질기준에 따라 휘발유, 등유, 경유 및 왁스로 분류하였다. TGA분석결과, 3종류의 시료 모두가 가열속도를 증가시킴에 따라 열분해 개시온도가 증가하는 것으로 나타났으며, 일정한 가열속도에서 열분해 개시온도는 LDFE$475^{\circ}C$ 이상에서는 모든 폴리에틸렌 시료의 전환율이 90 wt% 이상이었다. 휘발유와 등유의 수율은 $450^{\circ}C$, 65분에서 최대이었으며 $475^{\circ}C$ 이상에서는 약간 감소하는 것으로 나타났다.

열분해 카본블랙을 이용한 아스팔트 바인더의 피로 및 저온 성능 평가 (Evaluation of Pyrolysis Carbon Black Modified Asphalt Binder for Fatigue and Low Temperature Crack)

  • 이동항;이관호
    • 한국산학기술학회논문지
    • /
    • 제14권5호
    • /
    • pp.2511-2515
    • /
    • 2013
  • 본 아스팔트 바인더의 피로균열 및 저온균열 특성을 개선하기 위하여 페타이어 열분해 공법의 부산물인 카본블랙을 이용하였다. 원아스팔트에 열분해 카본블랙 0%, 5%, 10%, 15% 및 20%를 혼합하였고, 동적전단유동기시험 및 처짐보유동기시험을 시행하였다. 열분해 카본블랙을 혼합한 아스팔트 바인더의 피로균열이 감소하는 경향을 나타내었고, 저온에서의 균열은 -12도까지는 개선되었으나, -18도에선 기준을 초과하는 것으로 나타났다.

저온에서 methane의 촉매적 열분해시 nanosized pyrolytic carbon whisker성장의 발견 (Growth of Nanosized Pyrolytic Carbon Whisker by Catalytic Pyrolysis of Methane)

  • H. S. Rhee;Park, Y. T.
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2003년도 춘계학술발표대회 논문집
    • /
    • pp.173-175
    • /
    • 2003
  • At the low temperature of $950^{\circ}C$ the $\mu\textrm{m}$-sized whisker growth during the catalytic CVD of pyrolytic carbon from methane with $H_2$- and Ar-gas on quartz substrate with NiO powder was found in this work. In the preliminary study it was observed from pure methane pyrolysis without catalyst at the high temperature $1500~1700^{\circ}C$. If the growth whisker should be stopped at initial stage, about 20 min. of the methane pyrolysis, it would be nanosized whisker growth. The screw growth mechanism and unique mechanical properties of whisker for composites were also recognized. If the pyrolysis would be continued, we could found also spiral growth of whistlers with diameter of about 1, 5 mm. The large length of whisker was about 10 cm in 20 minute.

  • PDF

혼합 폐플라스틱 열분해 잔류물의 화학적 활성화를 통해 제조한 활성탄의 흡착 특성 조사 (Investigation of the Adsorption Properties of Activated Carbon Made by Chemical Activation of Mixed Waste Plastic Pyrolysis Residues)

  • 문은진;강윤석;박병선
    • 한국건설순환자원학회논문집
    • /
    • 제11권4호
    • /
    • pp.391-399
    • /
    • 2023
  • 최근 증가하는 폐플라스틱의 재활용 방법으로 저온 열분해 기술이 연구되고 있다. 폐플라스틱 저온 열분해 기술은 에너지 자원으로 활용할 수 있는 열분해유를 생산하지만, 고체의 잔류물이 발생한다. 폐플라스틱 열분해 잔류물은 활용 범위가 낮아 대부분 매립 처리하고 있다. 본 연구에서는 혼합 폐플라스틱 열분해 잔류물를 활성탄으로 재활용하기 위한 연구를 수행하였다. 혼합 폐플라스틱 열분해 잔류물의 화학적 활성화를 통해 활성탄을 제조하고, 그 특성에 대해 조사하였다. 공업분석을 통해 잔류물의 고정탄소량이 33.69 %인 것으로 확인하였다. 활성탄 제조에는 화학적 활성화를 활용하였으며. 활성화제로 KOH를 사용하였다. KOH와 잔류물의 혼합비율의 영향을 조사하기 위해 0.5, 1.0, 2.0의 비율로 시료를 혼합하였다. 혼합한 시료는 활성화 온도는 800 ℃에서 1시간 동안 화학적 활성화를 진행하였다. BET를 통한 활성탄 특성 분석 결과 KOH의 혼합비율이 증가할수록 비표면적이 증가하는 것을 확인하였다.