• Journal of Conservation Science
• /
• v.33 no.5
• /
• pp.345-354
• /
• 2017

A mural was discovered in the Ssanggyesa temple located in Jindo island, during repair of the Daeungjeon Hall. A study was conducted to determine the binding medium used for preparing the mural. Pyrolysis/GC/MS and IR spectrometry were used to analyze a painting specimen. Direct approach and on-line methylation approach were attempted for the pyrolysis/GC/MS. In IR analysis, the spectra of the specimen were found to be different from those of Asian lacquer, yellow lacquer, animal glue, and acrylic emulsion resin. They were also not identical to the standard IR spectra of drying oils such as linseed oil. Pyrolysis/GC/MS results of the specimen were different from those of Asian lacquer, yellow lacquer, animal glue, and acrylic emulsion resin. In the mean time, palmitic acid, octadecanoic acid, nonanedioic acid, and octadecenoic acid, which are characteristic pyrolysis products of dried drying oil, were detected. In addition, the pyrolysis/GC/MS chromatograms of the specimen and dried drying oil were also very similar. Therefore, it was concluded that the painting was prepared using drying oil as a binding medium.

• Analytical Science and Technology
• /
• v.28 no.3
• /
• pp.221-227
• /
• 2015

Animal glue is a traditional material that was used widely as an adhesive in cultural artifacts, such as Buddhist paintings, dancheong (traditional multicolored paintwork on wooden buildings), mother-of-pearl inlay, and so on. Spectroscopic methods, such as infrared spectroscopy, have been used for the analysis of animal glue. However, such methods do not yield sufficient information about the constituents of the glue. Because pyrolysis/GC/MS analysis is able to estimate the components of a material through the examination of its pyrolyzed products, it is useful for the analysis of polymeric material. In this study, pyrolysis/GC/MS analysis was used to determine the chemical composition of animal glue. The appropriate conditions for analyzing animal glue were established by examining pyrolysis temperature, quantity of the sample, and the repeatability of the method. Some products of pyrolysis were identified. We also analyzed commercial gelatin and animal glue using the established method and found almost no differences in chromatograms among the samples. The results will be used as supporting data to confirm the use of animal glue in cultural artifacts and to replace traditional animal glue by commercial gelatin.

• Elastomers and Composites
• /
• v.51 no.1
• /
• pp.63-67
• /
• 2016

Poly(ethylene-co-vinyl acetate) (EVA) was pyrolyzed to eliminate acetic acid of VA unit using off-line pyrolysis, and the deacetylated EVA was analyzed infrared spectroscopy (IR) and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). EVA film for deacetylation was prepared by solution casting on aluminum foil and it was pyrolyzed at low temperature of $300^{\circ}C$ in the off-line pyrolysis apparatus. After deacetylation, carbon-carbon double bond (C=C) was formed by 1,2-elimination of the VA unit in the EVA backbone. Most of C=C bonds were trans-1,4-unit and 1,2-unit was also observed. Presence of the 1,2-unit in deacetylated EVA indicates that terminal or branch VA units exist in the raw EVA. Py-GC/MS chromatogram of deacetylated EVA displayed much smaller acetic acid and much more abundant other pyrolysis products than that of raw EVA, which means that the pyrolysis efficiency and separation condition were improved.

• Analytical Science and Technology
• /
• v.27 no.2
• /
• pp.100-107
• /
• 2014

Plastic has been widely used in modern artworks' materials due to its merits of process ability and mass production. In the country, value of plastic artifact is increasing but the field of plastic study is limited to industrial purpose. In this study, Identification methods of plastic were performed by SPME-GC/MS and pyrolysis-GC/MS using trace of samples. As a result of identification using SPME-GC/MS, aromatic compounds were identified from polyvinyl chloride. And alkane compounds were identified from polyethylene, and polypropylene. Aromatic compounds were identified from polystyrene, and diethylene glycol appeared in polyurethane based on polyester was identified from polyurethane. As a result of identification using pyrolysis- GC/MS, aliphatic alkenes compounds and phthalate(DEHP) were identified from polyvinyl chloride. Aliphatic alkenes compounds and phthalate(DIBP) were detected from polyethylene. 1-hexene, etc., were detected from polypropylene, aromatic compounds were identified from polystyrene, and methylene diphenyl diisocyanate which is polyurethane basic material was confirmed from polyurethane. This study suggested that non-destructive SPME and pyrolysis-GC/MS are useful to identify compounds particularly polystyrene and polyurethane. These two analytical methods were expected to be applied for identification of unidentified plastic artworks before conservation treatment.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.707-711
• /
• 2019

The feasibility of waste concrete as a catalyst for the effective pyrolysis of polyethylene terephthalate (PET) was examined using thermogravimetric (TG) and pyrolyzer-gas chromatography/mass spectrometry (Py-GC/MS) analyses. TG analysis results indicated that the maximum decomposition temperature of PET is not altered by the use of waste concrete, showing similar values (407 ℃ and 408 ℃ at 5 ℃/min). Meanwhile, the volatile product distribution data obtained from the Py-GC/MS analysis revealed that the use of waste concrete promoted the deoxygenation reaction via converting the oxygen containing products such as benzoic acids, benzoates, and terephthalates to valuable deoxygenated aromatic hydrocarbons including benzene, toluene, ethylbenzene, and styrene. This suggests that the waste concrete can be used as a potential catalyst for the production of valuable aromatic hydrocarbons from PET pyrolysis.

• Journal of the Korean Wood Science and Technology
• /
• v.23 no.2
• /
• pp.19-25
• /
• 1995

This research was carried out to investigate the methods of liquefaction with Pinus koraiensis, and chemical components of the liquefied wood by FT-IR analysis and pyrolysis-GC/MS. Acetylated wood powder was liquefied above 90% in phenol or m-cresol when treated at about 150$^{\circ}C$ for 30min., using some catalysts. Untreated wood powder was liquefied above 90% in phenol or m-cresol when treated at about 200$^{\circ}C$ for 60min., using some catalysts. The results of FTIR analysis, carbohydrates were terribly disintegrated, the other side lignin peaks were occurred in liquefied wood, particulary. The results of pyrolysis-GC/MS, the liquefied wood have clear four peaks, phenol, guaiacol, o-cresol and m-/p-cresol, due to degradation of lignin, particulary.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.1
• /
• pp.38-42
• /
• 2006

When whole cells are subjected to pyrolysis gas chromatography/mass spectrometry (Py-GC/MS) analysis, it provides biochemical profiles containing overlapping signals of the majority of compounds. To determine marker compounds that discriminate embryogenic calluses from nonembryogenic calluses, samples of embryogenic and nonembryogenic calluses of five higher plant species were subjected to Py-GC/MS. Genetic programming of Py-GC/MS data was able to discriminate embryogenic calluses from nonembryogenic calluses. The content ratio of 5-meyhyl-2-furancarboxaldehyde and 5-(hydroxymethyl)-2-furancarboxaldehyde was greater in nonembryogenic calluses than in embryogenic calluses. However, the content ratio of phenol, p-cresol, and $^1H-indole$ in embryogenic calluses was 1.2 to 2.4 times greater than the ratio in nonembryogenic calluses. These pyrolysates seem to be derived from the components of the cell walls, which suggests that differences in cell wall components or changes in the architecture of the cell wall playa crucial role in determining the embryogenic competence of calluses.

• Journal of Conservation Science
• /
• v.32 no.1
• /
• pp.21-32
• /
• 2016

Animal glue is a traditional material used extensively as adhesive and binder in mother-of-pearl, wooden structure, traditional painting, etc. Analysis of animal glue is usually performed with IR(infrared spectroscopy) based on the IR absorption of functional group. But, it has a limitation in confirming animal glue when a sample consists of several materials because of overlapping of the absorption band. Py/GC/MS(pyrolysis/gas chromatography/mass spectrometry) is a useful tool in analyzing the constituent of polymeric materials like animal glue by identifying their pyrolysate with very small amount of sample. In this study, confirmation of animal glue in a Dancheong sample was tried with this method. Characteristic pyrolytic compounds of animal glue and tung oil used in Dancheong were identified. Dancheong sample painted with Noerok as a coloring material, animal glue and tung oil was prepared and it was possible to find characteristic peaks of animal glue after thermal degradation and artificial weathering experiment. From this, we found that animal glue can be detected using py/GC/MS in cultural heritage samples consisting of several materials and in different condition. IR was also tried to analyze Dancheong sample and the results were compared with those of py/GC/MS for the detection of animal glue.

• Analytical Science and Technology
• /
• v.24 no.4
• /
• pp.256-265
• /
• 2011

Ambers have been used as a gemstone and a religious object since the ancient times and found in several archaeological sites in Korea. To prepare an enhanced conservation measures, we surveyed the chemical and spectroscopic properties of the ambers according to the provenance. Total 14 amber samples were collected from 6 different provenances including Baltic, Chiapas, Colombian, Dominican, Fushun and Madagascar amber. Infrared (IR) spectroscopic analysis was conducted for the non-destructive examination of the amber samples. They were also analyzed with pyrolysis/GC/MS (py/GC/MS) at the pyrolysis temperature of $300^{\circ}C$ with the on-line derivatization to trimethylsilyl ester. Baltic shoulder corresponding to the absorption at $1250cm^{-1}{\sim}1150cm^{-1}$ appeared in the IR spectrum of Baltic amber. IR spectra of the other ambers also showed somewhat distinctive characteristic peaks. In py/GC/MS analysis peaks assignable to succinic acid, dehydroabietic acid and pimaric acid were detected, which are known to be the components of the amber. In the meanwhile, the presence of compounds appearing in certain amber will be applied to differentiate the provenances of amber relics if their fragments are available for the analysis. These results are expected to help the confirmation of archaeological amber relics and archaeometric interpretation of provenances and manufacturing techniques.

• Journal of Conservation Science
• /
• v.34 no.5
• /
• pp.369-377
• /
• 2018

In order to examine the constituents and weathered state of a lacquer specimen, analysis of the organic materials was conducted using py/GC/MS(pyrolysis-gas chromatography-mass spectrometry). The samples were obtained from the lacquered wooden sheath of a long ring-pommel sword excavated in the Imdang No.1 ancient tomb constructed around the Proto-Three Kingdoms period. In direct py/GC/MS, the sample and the dried Asian lacquer showed similar chromatograms, while the characteristic compounds of Asian lacquer such as 1,2-dimethoxy-3-pentadecylbenzene were observed in THM(thermally assisted hydrolysis and methylation)-py/GC/MS. In addition, compounds like dimethyl nonanedioate, which presumably originated from drying oil, were also detected. Furthermore, the detection of oxidized catechols in considerable amount indicated that the degradation of lacquer is estimated to result from the oxidation of urushiol. Therefore, it is suggested that the lacquered wooden sheath was prepared using Asian lacquer and drying oil, and that the lacquer layer was considerably oxidized over the long burial time.