본 연구의 목적은 농어촌 체험에 영향을 미치는 요인을 통합된 PPM모델(unified push-pull-mooring model)을 적용하여 탐색하는 것이다. 이론적인 모델은 PPM을 근간으로 하여 새로운 변수들을 도입한 통합된 PPM모델이다. 새롭게 도입된 변수 중 pull 요인은 체험이론과 ServQual 모형을 바탕으로 재구성하였다. 종속변수는 고객 만족을 설정하였다. 가설은 다음과 같이 설정하였다. Push 요인은 체험 만족에 부(-)의 영향을 미치고, Pull 요인인 체험요소와 체험품질은 체험 만족에 정(+)의 영향을 미칠 것이다. 또한, mooring 요인은 체험 만족에 부(-)의 영향을 미칠 것이다. 본 연구의 연구 모형을 314개 설문데이터를 기반으로 하여 구조방정식으로 검정하였다. 연구 결과 Pull 요인인 체험품질은 체험 만족에 정(+)의 영향을 미쳤다. Mooring 요인은 체험의도에 부(-)의 영향을 미치는 것으로 나타났다. 하지만, push 요인과 체험 만족 간, 체험요소와 체험 만족 간에는 유의한 영향 관계가 검정되지 않았다. 이러한 연구 결과는 이론적으로는 농어촌 체험에 있어서 기존의 pull, push 요인 위주의 분석에서 나아가 심리적인 mooring 요인도 체험에 중요한 영향을 미친다는 것을 검정하였다. Pull 요인으로 도입된 체험요소와 체험품질을 바탕으로 제안된 통합된 PPM모델이 유용한 분석의 틀이 될 수 있음을 검정하였다. 실무적으로는 농어촌 체험을 활성화시키기 위해 어떠한 요소에 전략적으로나 마케팅적으로 집중해야 하는지에 대한 시사점을 제공할 수 있었다.
A push pull hood system is frequently applied to control contaminants evaporated from an open surface tank. Efficiency of push pull hood system is affected by various parameters, such as, cross draft, vessel shapes, tank surface area, liquid temperature. A previous work assisted by flow visualization technique qualitatively showed that a strong cross draft blown from the pull hood to push slot could destroy a stable wall-jet on the surface of tank, resulting in the abrupt escape of smoke from the surface. In this study, the tracer gas method was applied to determine the effect of cross-draft on the capture efficiency qualitatively. A new concept of capture efficiency was introduced, that is, linear efficiency. This can be determined by measuring the mass of tracer gas in the duct of pull hood while the linear tracer source is in between push slot and pull hood. By traversing the linear tracer source from the push slot to the pull hood, it can be found where the contaminant is escaped from the tank. Total capture efficiency can be determined by averaging the linear efficiencies. Under the condition of cross-draft velocities of 0, 0.4, 0.75, 1.05 and 1.47m/s, total capture efficiencies were measured as 97.6, 95.4, 94.6, 92.7 and 70.5% respectively. The abrupt reduction of efficiency with cross-draft velocity of 1.47m/s was due to the destruction of tank surface wall-jet by the counter-current cross-draft. The same phenomenon was observed in the previous flow visualization study. As an alternative to overcome this abrupt efficiency drop, the 20% increase of hood flow rates was tested, resulting in 20% efficiency increase.
본 연구는 등산객의 건강과 관련된 동기요인과 산림환경이 갖는 유인요인을 도출하고 이들 요인 간의 분석을 통하여 산림휴양공간에 대한 효율적인 관리방안을 제시하는 데 그 목적이 있다. 도봉산, 북한산, 관악산, 청계산을 찾은 등산객 440명에 대해 건강과 관련된 15개의 동기항목 및 11개의 유인항목을 설문조사한 결과, 등산동기요인으로 '질병치료 치유', '정신 사회적 건강', '신체적 건강' 등 3개 요인을, 등산유인요인으로는 '인문환경', '사회경제적 환경', '자연환경' 등 3개 요인을 도출하였다. 요인 간 영향관계 분석결과, 질병치료 치유요인과 신체적 건강요인에 가장 큰 영향을 미치는 유인요인은 자연환경요인으로 나타났으며, 정신 사회적 건강요인에 가장 큰 영향을 미치는 유인요인은 사회경제적 환경요인으로 나타났다.
Objectives: To assess the risk of pushing or pulling the yarn-carrying cart, the survey was performed in some fiber manufacturing factories. Methods: We selected 6 fiber-twisting factories which agreed to in-site survey of their workplace. To measure both initial and sustained forces of the push-pull tasks, Chatillon CSD500 dynamometer(2004, Ametek, USA) was used. The mean of 3 tests for the same cart was adopted as the measured forces. Height and width of cart, weight of spooled yarns, and distance of movement were also measured. Inspection of cart wheel, moving path, and the actual hand position while moving was done. Results: More than one pushing or pulling task exceeded the push-pull force limits of design goal in 5 factories. Though the cart was not loaded the heaviest weight in the factory, the measured push or pull force exceeded the limits several times. A few cart wheels were worn out and tangled with pieces of yarn. It was also observed some holes in the moving path. Conclusions: While the push-pull task is not included in the 11 scopes of over-burdened work notified by Korean government, it should be recognized as risk factor of work-related musculoskeletal disorders. The maintenance work such as regular change and frequent cleaning of cart wheel, the use of fitting wheel, and flattening of bumpy floor through the moving path should be advised importantly in the worksite management of work-related musculoskeletal disorders.
Multimedia communication systems require not only high-performance computer hardwares and high-speed networks, but also a buffer management mechanism to process many data efficiently. Two buffer handling methods, Push and Pull, are commonly used. In the Push method, a server controls the flow of dat to a client, while in the Pull method, a client controls the flow of data from a server. Those buffering schemes can be applied to the data transfer between the packet receiving buffer, which receives media data from a network server, and media playout devices, which play the recived media data. However, the buffer management mechanism in client-sides mainly support either one of the Push or the Pull method. Consequently, they have some limitations to support various media playout devices. Futhermore, even though some of them support both methods, it is difficult to use since they can't provide a unified structure. To resolved these problems, in this paper, we propose an efficient and flexible Push/Pull buffer management mechanism at client-side. The proposed buffer management scheme supports both Push and Pull method to provide various media playout devices and to support buffering function to absorb network jitter. The proposed scheme can support the various media playback devices using a single buffer space which in consequence, saves memory space compared to the case that a client keeps tow types of buffers. Moreover, it facilitates the single buffer as a mechanism for the absorbing network jitter effectively and efficiently. The proposed scheme has been implemented in an existing multimedia communication system, so called ISSA (Integrated Streaming Service Architecture), and it shows a good performance result compared to the conventional buffering methods in multimedia communication environments.
This study represents numerical analysis on the fluid flow and concentration characteristics by scattering fume at push-pull ventilation system. And the principal point is making optimum on improve an existing ventilation system. This phenomenon simulated about local ventilation system by using commercial CFD tool and base on these fact has find improvements. Advanced model shows most low different pressure and velocity which are suction capability at inlet surface of pull hood has most uniformity. When compared with existing model, Improved model has more good ventilation performance.
본 연구는 4개의 산악형 국립공원을 대상으로 탐방객들의 주요 방문 동기요인(push factor)과 이들 국립공원의 유인요인(pull factor)을 도출하고, 규명된 방문요인과 유인요인간의 입체적인 관계규명을 통하여 효율적인 산악형 국립공원 관리정책에 활용될 수 있는 기초자료를 제공하고자 수행하였다. 그 결과 동기요인으로는 가족중심의 자연 문화체험 일탈성 건강, 사회성 신기성의 4개 요인이 도출되었으며, 유인요인으로는 시설 문화재, 자연자원, 접근성의 3가지 요인이 도출되었다. 이들 방문 동기요인과 유인요인간의 상호 연관성을 통계적으로 확인한 결과, 동기요인과 유인요인들은 상호 연관관계가 존재하는 것으로 나타났다. 이러한 결과를 유인요인을 기준으로 동기요인들과의 관계를 살펴보면, 국립공원의 시설 문화재 유인요인은 자연 문화체험 동기와 사회성 신기성 동기에 양(+)의 영향을 받는 것으로 나타났으며, 자연자원 유인요인은 자연 문화체험, 일탈성, 건강, 사회성 신기성 등 모든 동기요인에 양(+)의 영향을 받는 것으로 나타났다. 그러나 접근성 유인요인에 있어서는 건강동기에 양(+)의 영향을 받는 반면, 자연 문화체험 동기에는 음(-)의 영향을 받는 것으로 나타났다.
Purpose: The purpose of this study was to investigate the most effective exercise position of Latissimus dorsi's activities during Pull up, Push up and Lat pull down among few positions of hand grips(pronation, Supination and neutral grip) and grip widths(30cm, 60cm) based on EMG activities. Method: 10 healthy adults were participated in this study and the surface EMG activities of the Latissimus dorsi were measured during Pull up, Push up and Lat pull down exercise according to specific hand grip and grip width positions. The maximum and mean value of Latissimus dorsi's EMG activities at all positions were recorded and analysed by ONE-WAY REAPTED ANOVA. Results: The showed that the most Latissimus dorsi's activities is during Pull up exercise. Main results are as follows 1)maximum value: For Pull up, among all studied positions, Rt Latissumus dorsi, position of Supinated grip and 60cm grip width showed strongest muscle activation based on maximum EMG value. Statistical significance was assumed at p<.05. 2)mean value: For Pull up, among all studied positions, Both Latissimus dorsi, position of pronated grip and 60cm grip width showed strongest muscle activation based on mean EMG value. Statistical significance was assumed at p<.05. Conclusion: Therefore, taking the results of this study, Pull up exercise would be the best exercise of Latissimus dorsi's activation. It is recommended to do in pronated grip position and 60cm grip width during Pull up to make body fit.
본 연구는 멀티채널 환경 내에서 소비자의 쇼루밍에서 웹루밍으로의 쇼핑 행동 전환에 대한 연구로 밀고 당기기 이주 (Push-pull-mooring: PPM) 이론을 적용하였다. 웹루밍 의도에 영향을 미치는 변수로는 푸쉬 효과 (Push effect), 풀 효과 (Pull effect), 그리고 계류 효과 (Mooring effect)로 설정하고, 쇼루밍의 실용적 쇼핑가치의 결핍을 푸쉬 효과로, 웹루밍의 경험적 쇼핑가치를 풀 효과로, 그리고 쇼루밍 락인을 계류 효과로 개념화하였으며, 각각에 영향을 미치는 선행변수들을 문헌연구를 통해 도출하고 연구모형을 설계하였다. 276부의 설문을 대상으로 실증분석을 실시하였으며, 구조방정식 모형을 검증한 결과, 쇼루밍의 실용적 쇼핑가치 결핍과 웹루밍의 경험적 쇼핑가치는 웹루밍 의도에 긍정적인 영향을 미치며, 쇼루밍 계류는 웹루밍 의도에 부정적 영향을 미친다는 것이 확인되었다.
기존의 Push-Pull 트랜스듀서보다 간단한 구조를 가지며 출력을 한층 더 높이기 위해서 실린더 중앙에 구동부를 둔 새로운 구조의 Push-Pull 트랜스듀서를 설계하고자 한다. 유한 요소 상용 패키지인 ANSYS를 이용하여 트랜스듀서 모델을 구성한 후, 각종 구조 변수들, 즉, 길이, 반경, Endcap Edge 형상등의 변화에 대한 음압의 변화경향을 조사하여 최대 음압을 구현하기 위한 최적 길이, 반경, Endcap Edge 형상을 설정하였다. 기존 트랜스듀서 보다 구조적으로 더 간단하면서도 더 큰 음압을 구현할 수 있는 새로운 구조의 고출력 트랜스듀서를 개발하였고, 그 성능을 기존 트랜스듀서의 성능과 비교 평가함으로써 개발된 트랜스듀서의 우수성을 입증하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.